史萊姆論壇

返回   史萊姆論壇 > 教學文件資料庫 > 作業系統操作技術文件
忘記密碼?
論壇說明 標記討論區已讀

歡迎您來到『史萊姆論壇』 ^___^

您目前正以訪客的身份瀏覽本論壇,訪客所擁有的權限將受到限制,您可以瀏覽本論壇大部份的版區與文章,但您將無法參與任何討論或是使用私人訊息與其他會員交流。若您希望擁有完整的使用權限,請註冊成為我們的一份子,註冊的程序十分簡單、快速,而且最重要的是--註冊是完全免費的!

請點擊這裡:『註冊成為我們的一份子!』

Google 提供的廣告


 
 
主題工具 顯示模式
舊 2003-06-09, 08:57 PM   #1
psac
榮譽會員
 
psac 的頭像
榮譽勳章
UID - 3662
在線等級: 級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時
註冊日期: 2002-12-07
住址: 木柵市立動物園
文章: 17381
現金: 5253 金幣
資產: 33853 金幣
預設 Windows 2000/Xp 錯誤編號詳解(收集整理)

2000/Xp 顯示藍色當機之STOP詳解
Windows 2000/Xp 顯示藍色當機之STOP詳解


1.停止錯誤編號:0x0000000A

``說明文字:IRQL-NOT-LESS-OR-EQUAL

  通常的原因:驅動程式使用了不正確的記憶體位址.

``解決方法:如果無法登陸,則重新啟動電腦.當出現可用的作系統列表時,按F8鍵.在Windows進階選項表單螢幕上,選項"最後一次正確的配置",然後按Enter鍵鍵.
``檢查是否正確安裝了所有的新硬體或軟體.如果這是一次全新安裝,請與硬體或軟體的製造商聯繫,獲得可能需要的任何Windows更新或驅動程式.
``執行由電腦製造商提供的所有的系統診斷軟體,尤其是記憶體檢查.
``禁用或卸掉新近安裝的硬體(RAM,橋接器,硬碟,調製解調器等等),驅動程式或軟體.
``確保硬體設備驅動程式和系統BIOS都是最新的版本.確保製造商可說明 你是否具有最新版本,也可說明 你獲得這些軟體.
``禁用BIOS記憶體選項,例如cache或shadow.

2.停止錯誤編號:0x0000001E

``說明文字:KMODE-EXPTION-NOT-HANDLED

``通常的原因:內核模式工作試圖執行一個非法或未知的處理器指令.

  解決方法:確保有足夠的空間,尤其是在執行一次新安裝的時候.如果停止錯誤消息指出了某個特定的驅動程式,那麼禁用他.如果無法啟動電腦.應試著用安全模式啟動,以便刪除或禁用該驅動程式.
  如果有非 Microsoft支持的視瀕驅動程式,盡量切換到標準的VGA驅動程式或Windows提供的適當驅動程式.
  禁用所有新近安裝的驅動程式.
``確保有最新版本的系統BIOS.硬體製造商可說明 確定你是否具有最新版本,也可以說明 你獲得他.
``禁用BIOS記憶體選項,例如cache,shadow.

3.停止錯誤編號:0x00000023或0x00000024

  說明文字:FAT-FILE-SYSTEM 或 NTFS-FILE-SYSTEM

  通常原因:問題出現在 Ntfs.sys (允許系統讀寫NTFS驅動器的驅動程式文件)內.

  解決方法:執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
``禁用或卸載所有的反病毒軟體,磁碟重組程式或制作備份程序.
``通過在命令提示字元下執行Chkdsk /f指令檢查硬碟驅動器是否損壞,然後重新啟動電腦.

4.停止編號:0x0000002E

  說明文字:DATA-BUS-ERROR

  通常的原因:系統記憶體奇偶校驗出錯,通常由硬體問題導致.

  解決方法:卸掉所有新近安裝的硬體(RAM.橋接器.硬碟.調製解調器等等).
``執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
  確保硬體設備驅動程式和系統BIOS都是最新版本.
  使用硬體供應商提供的系統診斷,執行記憶體檢查來搜尋故障或不匹配的記憶體.
  禁用BIOS記憶體選項,例如cache或shadow.
  在啟動後出現可用作系統列表時,按F8.在Windows進階選項表單螢幕上,選項"啟動VGA模式,然後按Enter鍵鍵.如果這樣做還不能解決問題,可能需要更換不同的視瀕橋接器列表,有關支持的視瀕橋接器列表,請參閱硬體相容性列表.



5.停止編號:0x0000003F

  說明文字:NO-MOR-SYSTEM-PTES

  通常的原因:沒有正確清理驅動程式.

  解決方法:禁用或卸載所有的反病毒軟體,磁牒碎片處理程序或制作備份程序.

6.停止錯誤編號:0x00000058

  說明文字:FTDISK-INTERN-ERROR

  通常的原因:容錯集內的某個主驅動器發生故障.

``解決方法:使用Windows安裝碟啟動電腦,從鏡象(第2)系統驅動器引導.有關如何編輯Boot.ini文件以指向鏡象系統驅動器的指導,可在本站的其他文章中尋找。


7.停止錯誤編號:0x0000007B

  說明文字:INACCESSI-BLE-BOOT-DEVICE

  通常原因:啟始化 I/O 系統(通常是指引導設備或文件系統)失敗.

  解決方法:啟始扇區病毒通常會導致這種停止錯誤.是用反病毒軟體的最新版本,檢查電腦上是否有存在病毒.如果找到病毒,則必須執行必要的不找把他從電腦上清除掉,請參閱反病毒軟體我的文件瞭解如何執行這些步驟.
  卸下所有新近安裝的硬體(RAM,橋接器,調製解調器等等).
  核對MIcrosoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.
  如果使用的適SCSI橋接器,可以從硬體供應商除獲得最新WINDOWS驅動程式,禁用SCSI設備的同步協商,檢查該SCSI鏈是否終結,並核對這些設備的SCSIID,如果無法確定如何執行能夠這些步驟,可參考硬體設備的我的文件.
  如果你用的是IDE設備,將板上的IDE連接阜定義為唯一的主連接阜.核對IDE設備的主/從/唯一設置.卸掉除硬碟之外的所有IDE設備.如果無法驗證如何執行這些不找,可參考硬體我的文件.
  如果電腦已使用NTFS文件系統格式化,可重新啟動電腦,然後在該系統分區上執行Chkdsk/f/r指令.如果由於錯誤而無法啟動系統,那麼使用指令控制台,並執行Chkdsk /r指令.
  執行Chkdsk /f指令以確定文件系統是否損壞.如果Windows不能執行Chkdsk指令,將驅動器移動到其他執行Windows的電腦上,然後從這台電腦上對該驅動器執行Chkdsk指令.



8.停止錯誤編號:0x0000007F

  說明文字:UNEXPECTED-KERNEL-MODE-TRAP

  通常的原因:通常是由於硬體或軟體問題導致,但一般都由硬體故障引起的.

  解決方法:核對Microsoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.如果電腦主機板不相容就會產生這個問題.
  卸掉所由新近安裝的硬體.
  執行由電腦製造商提供的所有系統診斷軟體,尤其是記憶體檢查.
  禁用BIOS記憶體選項,例如cache或shadow.

9.停止錯誤編號:0x00000050

  說明文字:PAGE-FAULT-IN-NONPAGED-AREA

  通常的原因:記憶體錯誤(資料不能使用分頁文件交換到磁牒中).

  解決方法:卸掉所有的新近安裝的硬體.
  執行由電腦製造商提供的所有系統診斷軟體.尤其是記憶體檢查.
  檢查是否正確安裝了所有新硬體或軟體,如果這是一次全新安裝,請與硬體或軟體製造商聯繫,獲得可能需要的任何Windows更新或驅動程式.
  禁用或卸載所有的反病毒程序.
  禁用BIOS記憶體選項,例如cache或shadow.

10.停止錯誤編號:0x0000077

  說明文字:KERNEL-STEL-STACK-INPAGE-ERROR

  通常的原因:無法從分頁文件將內核資料所需的頁面讀取到記憶體中。

  解決方法:使用反病毒軟體的最新版本,檢查電腦上是否有病毒。如果找到病毒,則執行必要的步驟把他從電腦上清除掉。請參閱製造商提供的所有系統診斷軟體,尤其是記憶體檢查。
禁用BIOS記憶體選項,例如cache,shadow

11.停止錯誤編號:0x00000079

  說明文字:MISMATCHED-HAL

  通常的原因:硬體抽像層與內核或機器類型不匹配(通常發生在單處理器和多處理器配置文件混合在同一系統的情況下)。

  解決方法:要解決本錯誤,可使用指令控制台替換電腦上錯誤的系統檔案。
單處理器系統的內核文件是Ntoskml.exe,而多處理器系統的內核文件是Ntkrnlmp.exe,但是,這些文件要與安裝媒體上的文件相對應;在安裝完Windows2000和,不論使用的是哪個原文件,都會被重命名為Ntoskrnl.exe文件。HAL文件在安裝之後也使用名稱Hal.dll但是在安裝媒體,但是在安裝媒體上卻有若干個可能的HAL文件。

12.停止錯誤編號:0x0000007A

  說明文字:KERNEL-DATA-INPAGE-ERROR

  通常的原因:無法從分頁文件將內核資料所需的頁面讀取到記憶體中。(通常是由於分頁文件上的故障,病毒,磁牒控制器錯誤或由故障的RAM引起的)。

  解決方法:使用反病毒軟體的最新版本,檢查電腦上是否存在病毒。如果找到病毒。則執行必要的步驟把他從電腦上清除掉,請參閱犯病度軟體我的文件瞭解如何執行這些步驟。
``如果電腦已使用NTFS文件系統格式化。可重新啟動電腦,然後在該系統分區上執行Chkdsk/f/r指令。如果由於錯誤而無法啟動指令,那麼使用指令控制台,並執行Chkdsk /r指令。
``執行由電腦製造商提供的所有的系統在很端軟體,尤其是記憶體檢查。

13.停止錯誤編號:0xC000021A

  說明文字:STATUS-SYSTEM-PROCESS-TERMINATED

  通常的原因:用戶模式子系統,例如Winlogon或客戶伺服器執行時子系統(CSRSS)已被損壞,所以無法再保證安全性。

  解決方法:卸掉所有新近安裝的硬體。
``如果無法登陸,則重新啟動電腦。當出現可用的作系統列表時按F8,在Windows2000進階選項表單螢幕上,選項:「最後一次正確的配置」。然後按Enter鍵。
`` 執行故障恢復台,並允許系統修復任何檢測到的錯誤。

14.停止錯誤編號:0xC0000221

  說明文字:STATUS-IMAGE-CHECKISU7M-MISMATCH

  通常的原因:驅動程式或系統DLL已經被損壞。

  解決方法:執行故障復控台,並且允許系統修復任何檢測到的錯誤。
``如果在RAM增加到電腦之後,立即發生錯誤,那麼可能是分頁文件損壞,或者新RAM由故障或不相容。刪除pagefile.sys並將系統返回到原來的RAM配置。


理解 Windows 2000 中的顯示藍色當機(BSOD)現象
理解 Windows 2000 中的顯示藍色當機(BSOD)現象
Brien M. Posey
翻譯:Batman

``Windows 2000 也許可以說得上是一個劃時代的操作系統,但是它仍然不能夠避免顯示藍色當機(Blue Screen of Death)問題。本文的目的是解刨BSOD問題,同時給出如何處理一般的顯示藍色問題的解決步驟。

一 簡介

``什麼是顯示藍色當機(BSOD)問題?


``BSOD就是顯示在藍色螢幕背景下的出錯信息。一般這種出錯信息嚴重到你的整個操作系統當機,你只有重新冷啟動的選項。

``停止消息和硬體消息

``Win2000的BSOD和NT4以前的BSOD消息是完全不同的。最大的不同就是NT中的BSOD只包含一個通用的停止消息類型(就是實際的出錯程式碼), 但是Win2000的BSOD包含有兩種消息類型:停止消息和硬體消息。
停止消息是指,當win2000的內核發現一個它不能夠恢復的軟體錯誤時候產生的錯誤消息。
硬體消息是指,當Win2000發現一個嚴重的硬體衝突時產生的錯誤消息。

二 刨析BSOD

``BSOD可以分成獨立的幾部分,每部分包含有有價值的錯誤處理信息。這幾部分包括:
``1.bug檢查部分:這是BSOD中包含實際出錯消息的位置。在這部分中,你應該注意的是出錯程式碼(就是在單詞「Stop」後面的十六進制數字)和錯誤符號(就是緊跟在出錯程式碼後的單詞)。
``2.推薦用戶採取行動部分:這部分經常包含一些一般的指導你如何糾正錯誤的步驟的消息。
``3.偵錯連接阜信息部分:這部分包含有你應該如何設置你的內核偵錯器的信息。內核偵錯器是讓你可以通過手工連線到電腦並對工作進行偵錯的工具。

``停止信息的四種類型:
``當程序或則驅動程式發生了一個不能夠控制的錯誤消息或則試圖執行一個非法指令時,系統就會發生停止出錯信息。而這種信息通常由四種類型組成:
``1.一般停止消息:在正常的使用win2000時發生的停止消息。
``2.安裝停止消息:在安裝win2000程序中的停止消息,通常由你的系統中存在和2000不相容的硬體設備引起的。
``3.可執行程序安裝停止消息:表示發生在2000安裝程序中第4個階段(執行程序部分)的停止消息。
``4.軟體陷阱停止消息:由於軟體中的錯誤陷阱並且當程序試圖執行一個非法指令的時候發生的停止消息。

``不管win2000是否迄今為止最偉大的操作系統與否,它不可能是沒有錯誤的。至少我們知道在2000中,BSOD還是存在的。下面是一個具體的BSOD例子:

*** Stop: 0x0000001E (0xF24A447A, 0X00000001, 0X0000000)
KMODE_EXCEPTION_NOT_HANDLED
*** Address F24A447A base at f24A0000, DateStamp 35825ef8d - wdmaud.
sys

If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Refer to your Getting Started manual for more information on troubleshooting Stop errors.

Kernel Debugger Using: COM2 (Port 0x2f8, Baud Rate 19200)
Beginning dump of physical memory

Physical memory dump complete. Contact your system administrator or
technical support group.

``根據這個具體的例子,按照上面刨析的BSOD四個部分,下面一一介紹:
``bug檢查部分:
``這是BSOD中包含實際出錯消息的位置。它看上去就是下面的程式碼:
*** Stop: 0x0000001E (0xF24A447A, 0X00000001, 0X0000000)
KMODE_EXCEPTION_NOT_HANDLED
*** Address F24A447A base at f24A0000, DateStamp 35825ef8d - wdmaud.
sys
``其中錯誤程式碼是一個緊跟在Stop後面的十六進制數,在這裡面它由其它四個數字組成。
``而錯誤符號是指緊隨其後的KMODE_EXCEPTION_NOT_HANDLED.
``在一些BSOD出錯信息中,一個記憶體位置和檔案名出現在錯誤符號的後面。這個信息告訴了當錯誤發生的時候在記憶體中的位置和哪個文件導致了錯誤的發生。當然你是否能夠看到該信息是由哪種停止消息類型來決定的。在一些實際運用中,你只能夠看到上面的第一行。而這裡通常是表示由顯示服務中導致的問題。

``推薦用戶採取行動部分:
``在上面的例子中推薦用戶採取行動部分如下:
``If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Refer to your Getting Started manual for more information on troubleshooting Stop errors.
``推薦用戶採取行動部分通常是推薦用戶在遇到了出錯信息後應該採取的解決步驟。在消息中可以看到,解決一個BSOD也許只要重新啟動或則整理出足夠大的剩餘空間就能夠解決了。儘管這樣的方法偶爾會起到作用,但是實際上要解決BSOD經常要遠遠複雜得多。

``偵錯連接阜信息部分:
``這部分包含有你應該如何設置你的內核偵錯器的信息。我會在以後的網站裡面詳細介紹什麼是2000的內核偵錯器。在上面的例子中,這部分內容是:
Kernel Debugger Using: COM2 (Port 0x2f8, Baud Rate 19200)
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or technical support group.

``停止信息的四種類型
``一般停止消息:
``一般停止消息通常是最難解決的出錯信息,因為有可能有無數的原因能夠導致錯誤的發生。

``安裝停止消息:
``在安裝win2000程序中的停止消息,通常由你的系統中存在有沒有列在2000硬體相容列表中的設備。解決辦法是你檢視系統中的硬體設備,找到沒有列出在2000相容列表中的設備。然後和你的硬體設備廠商聯繫看他們是否能夠給你提供該設備的驅動程式。如果他們不能,那你只好從你的系統中刪除該設備,並用其它的可以相容的設備替換掉。如果你的所有硬體都是相容的,你也許是存在有兩個互相衝突的硬體設備。要解決這個問題,先移走任何不是必要的硬體設備,然後重新裝載2000,一旦2000裝載成功後,把 所有移走的設備全部重新加入到系統中。這樣做,通常能夠解決這個問題,至少能夠告訴你哪些硬體是有衝突的。

``可執行程序安裝停止消息:
``安裝2000在可執行程序的安裝程序中有兩個階段。第一個階段是禁止硬體中斷同時裝載一些基本的組件, 例如硬體提取層。第二個階段是啟始化你系統中所有的硬體。如果你在安裝程序到了這個階段的時候收到了停止消息錯誤。需要再次執行診斷程序,來判斷你的硬體是否都工作正常。然後重新安裝2000。如果你仍然遇到這個出錯消息,那麼就需要和微軟技術支持部打交道了。

``軟體陷阱停止消息:
``由於軟體中的錯誤陷阱並且當程序試圖執行一個非法指令的時候發生的停止消息。例如,程序試圖向一個本來是儲存數字的變量寫字串串的時候,這個錯誤就有可能發生。如果你遇到了這種類型的錯誤,需要記下出錯信息,是什麼軟體導致了錯誤,一般這些軟體都有新的版本來糾正這些錯誤的。

三 解決問題的技巧

``下面是當你遇到了停止消息時候可能需要的解決步驟:
``首先判斷你最近是不是在系統中有任何的變動。如果你有,那麼這些變動經常是問題產生的根源。試圖刪除或者移走新的硬體或軟體,看是否能夠解決問題。檢查系統中的硬體,最好如果有硬體檢測程式的話,可以執行該程序進行檢測,同時重新插放你的記憶體卡和擴展卡。如果你的停止信息是發生在啟動中或剛啟動的程序中,那麼這有可能是你的某個服務或則設備驅動程式中的問題。可以嘗試將機器啟動到安全模式。如果你的2000系統能夠啟動成功安全模式,那麼表示你的猜測是正確的。同時要確保你的防病毒程序是設計成和win2000相容的,並且隨時保持更新。如果錯誤仍然發生,那麼進入你的CMOS設置,禁止掉BIOS中的象緩衝或則shadow之類的選項,然後重新啟動。


Windows 2000 的停止錯誤編號及其解釋
Windows 2000 的停止錯誤編號及其解釋

整理 CptFan

停止錯誤編號: 0x00000001 (parameter, parameter, parameter, parameter) APC_INDEX_MISMATCH

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a mismatch of thread and asynchronous procedure call (APC) indexes. The most common reason to see this message is if a file system has a mismatched number of KeEnterCriticalRegion compared to KeLeaveCriticalRegion.


停止錯誤編號: 0x00000002 (parameter, parameter, parameter, parameter) DEVICE_QUEUE_NOT_BUSY

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a device queue was expected to be busy, but was not.


停止錯誤編號: 0x00000003 (parameter, parameter, parameter, parameter) INVALID_AFFINITY_SET

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a null of nonproper subset affinity.


停止錯誤編號: 0x00000004 (parameter, parameter, parameter, parameter) INVALID_DATA_ACCESS_TRAP

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an invalid data access trap.


停止錯誤編號: 0x00000005 (parameter, parameter, parameter, parameter) INVALID_PROCESS_ATTACH_ATTEMPT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem with an owned mutex or a mutex with a process already attached.


停止錯誤編號: 0x00000006 (parameter, parameter, parameter, parameter) INVALID_PROCESS_DETACH_ATTEMPT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem with an owned mutex or an unclean asynchronous procedure call (APC) state.


停止錯誤編號: 0x00000007 (parameter, parameter, parameter, parameter) INVALID_SOFTWARE_INTERRUPT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a level not within the software range.


停止錯誤編號: 0x00000008 (parameter, parameter, parameter, parameter) IRQL_NOT_DISPATCH_LEVEL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to remove a device not at the dispatch level.


停止錯誤編號: 0x00000009 (parameter, parameter, parameter, parameter) IRQL_NOT_GREATER_OR_EQUAL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an IRQL that was expected to be greater or equal, but was not.


停止錯誤編號: 0x0000000A (parameter, parameter, parameter, parameter) IRQL_NOT_LESS_OR_EQUAL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to touch pageable memory at a process IRQL (interrupt request level) that is too high. This is usually caused by drivers using incorrect addresses. The fourth parameter in the message parameter list is the memory address at which the fault happened. The second parameter shows the IRQL. If the IRQL was not equal to 2, then the interrupt most likely came from a driver. Compare the memory address in the fourth parameter with the base addresses of the drivers in the driver table on the STOP screen to find the driver that is the problem. Note that the third parameter encodes read/write access (0 = read, 1= write).


停止錯誤編號: 0x0000000B (parameter, parameter, parameter, parameter) NO_EXCEPTION_HANDLING_SUPPORT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that exception handling was not supported.


停止錯誤編號: 0x0000000C (parameter, parameter, parameter, parameter) MAXIMUM_WAIT_OBJECTS_EXCEEDED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that there are too many wait objects in a wait multiple structure.


停止錯誤編號: 0x0000000D (parameter, parameter, parameter, parameter) MUTEX_LEVEL_NUMBER_VIOLATION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to acquire a lower-level mutex.


停止錯誤編號: 0x0000000E (parameter, parameter, parameter, parameter) NO_USER_MODE_CONTEXT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to enter user mode with no context.


停止錯誤編號: 0x0000000F (parameter, parameter, parameter, parameter) SPIN_LOCK_ALREADY_OWNED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to acquire an owned spin lock.


停止錯誤編號: 0x00000010 (parameter, parameter, parameter, parameter) SPIN_LOCK_NOT_OWNED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to release an unowned spin lock.


停止錯誤編號: 0x00000011 (parameter, parameter, parameter, parameter) THREAD_NOT_MUTEX_OWNER

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to release a thread by a mutex non-owner.


停止錯誤編號: 0x00000012 (parameter, parameter, parameter, parameter) TRAP_CAUSE_UNKNOWN

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a trap from an unknown cause.


停止錯誤編號: 0x00000013 (parameter, parameter, parameter, parameter) EMPTY_THREAD_REAPER_LIST

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates the thread reaper list is corrupted (the reaper list was signaled, but no threads were present on the list).


停止錯誤編號: 0x00000015 (parameter, parameter, parameter, parameter) LAST_CHANCE_CALLED_FROM_KMODE

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates that the last chance exception service was called from kernel mode.


停止錯誤編號: 0x00000016 (parameter, parameter, parameter, parameter) CID_HANDLE_CREATION

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred creating a handle to represent a client ID.


停止錯誤編號: 0x00000017 (parameter, parameter, parameter, parameter) CID_HANDLE_DELETION

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred deleting a handle to represent a client ID.


停止錯誤編號: 0x00000018 (parameter, parameter, parameter, parameter) REFERENCE_BY_POINTER

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred while referencing an object by what should have been a referenced pointer.


停止錯誤編號: 0x00000019 (parameter, parameter, parameter, parameter) BAD_POOL_HEADER

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates an invalid pool header.


停止錯誤編號: 0x0000001A (parameter, parameter, parameter, parameter) MEMORY_MANAGEMENT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a general memory management problem.


停止錯誤編號: 0x0000001B (parameter, parameter, parameter, parameter) PFN_SHARE_COUNT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a memory management page frame number (PFN) database element has a corrupted share count.


停止錯誤編號: 0x0000001C (parameter, parameter, parameter, parameter) PFN_REFERENCE_COUNT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a memory management page frame number (PFN) database element has a corrupted reference count.


停止錯誤編號: 0x0000001D (parameter, parameter, parameter, parameter) NO_SPIN_LOCK_AVAILABLE

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that no spin locks are available to allocate.


停止錯誤編號: 0x0000001E (parameter, parameter, parameter, parameter) KMODE_EXCEPTION_NOT_HANDLED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a kernel-mode exception was not handled. The second parameter in the parameter list is the memory address at which the unhandled exception occurred. Usually, the exception address pinpoints the driver/function that caused the problem. A common problem is 0x80000003, which means a hard-coded breakpoint or assertion was hit but the system started \\NODEBUG.


停止錯誤編號: 0x0000001F (parameter, parameter, parameter, parameter) SHARED_RESOURCE_CONV_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a shared resource conversion problem.


停止錯誤編號: 0x00000020 (parameter, parameter, parameter, parameter) KERNEL_APC_PENDING_DURING_EXIT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a kernel-mode asynchronous procedure call (APC) was found pending during thread termination. The first parameter is the address of the APC found pending during exit. The second parameter is the thread's APC disable count. And the third parameter is the current IRQL (interrupt request level). If the thread's disable count is non-zero, it is the source of the problem: the current IRQL should be 0. If it is not, a driver's cancellation routine returned at an elevated IRQL.


停止錯誤編號: 0x00000021 (parameter, parameter, parameter, parameter) QUOTA_UNDERFLOW

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that quota was returned to a process, but that process was not using the amount of quota being returned.


停止錯誤編號: 0x00000022 (parameter, parameter, parameter, parameter) FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates a generic file system problem.


停止錯誤編號: 0x00000023 (parameter, parameter, parameter, parameter) FAT_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a FAT file system problem.


停止錯誤編號: 0x00000024 (parameter, parameter, parameter, parameter) NTFS_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an NTFS file system problem.


停止錯誤編號: 0x00000025 (parameter, parameter, parameter, parameter) NPFS_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a named pipe file system problem.


停止錯誤編號: 0x00000026 (parameter, parameter, parameter, parameter) CDFS_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates a CD-ROM file system problem.


停止錯誤編號: 0x00000027 (parameter, parameter, parameter, parameter) RDR_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a redirector file system problem.


停止錯誤編號: 0x00000028 (parameter, parameter, parameter, parameter) CORRUPT_ACCESS_TOKEN

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that the security system encountered an invalid access token.


停止錯誤編號: 0x00000029 (parameter, parameter, parameter, parameter) SECURITY_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem internal to the security system.


停止錯誤編號: 0x0000002A (parameter, parameter, parameter, parameter) INCONSISTENT_IRP

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that an IRP (I/O request packet) was encountered in an inconsistent state. For example, some field or fields of the IRP were inconsistent with the remaining state of the IRP.


停止錯誤編號: 0x0000002B (parameter, parameter, parameter, parameter) PANIC_STACK_SWITCH

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a panic switch to the kernel stack because of stack overflow. This error might be caused by the kernel-mode driver using too much stack space. Or a data corruption has occurred in the kernel.


停止錯誤編號: 0x0000002C (parameter, parameter, parameter, parameter) PORT_DRIVER_INTERNAL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in a port driver.


停止錯誤編號: 0x0000002D (parameter, parameter, parameter, parameter) SCSI_DISK_DRIVER_INTERNAL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in a SCSI hard disk driver.


停止錯誤編號: 0x0000002E (parameter, parameter, parameter, parameter) DATA_BUS_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a data bus error which can be caused by a parity error in the system memory. This error could also be caused by a driver accessing an address that does not exist.


停止錯誤編號: 0x0000002F (parameter, parameter, parameter, parameter) INSTRUCTION_BUS_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an instruction bus error.


停止錯誤編號: 0x00000030 (parameter, parameter, parameter, parameter) SET_OF_INVALID_CONTEXT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to edit values of SS or ESP when returning to kernel-mode code.


停止錯誤編號: 0x00000031 (parameter, parameter, parameter, parameter) PHASE0_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive failed during phase 0 (during phase 4 of system startup). There might be a hardware problem.


停止錯誤編號: 0x00000032 (parameter, parameter, parameter, parameter) PHASE1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.


停止錯誤編號: 0x00000033 (parameter, parameter, parameter, parameter) UNEXPECTED_INITIALIZATION_CALL

解釋:
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.


停止錯誤編號: 0x00000034 (parameter, parameter, parameter, parameter) CACHE_MANAGER

解釋:
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.


停止錯誤編號: 0x00000035 (parameter, parameter, parameter, parameter) NO_MORE_IRP_STACK_LOCATIONS

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that the I/O system detected a call from one driver to another with no available IRP (I/O request packet) stack locations remaining in the packet for the invoked driver to use. Other memory problems might accompany this error.


停止錯誤編號: 0x00000036 (parameter, parameter, parameter, parameter) DEVICE_REFERENCE_COUNT_NOT_ZERO

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to delete a device object whose reference count was non-zero. A non-zero reference count means that there are still outstanding references to the device. There might be a problem in calling the device driver.


停止錯誤編號: 0x00000037 (parameter, parameter, parameter, parameter) FLOPPY_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a floppy disk driver internal error.


停止錯誤編號: 0x00000038 (parameter, parameter, parameter, parameter) SERIAL_DRIVER_INTERNAL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a serial device driver internal error.


停止錯誤編號: 0x00000039 (parameter, parameter, parameter, parameter) SYSTEM_EXIT_OWNED_MUTEX

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to exit a system service while owning one or more mutexes.


停止錯誤編號: 0x0000003A (parameter, parameter, parameter, parameter) SYSTEM_UNWIND_PREVIOUS_USER

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to unwind through the system service dispatcher into user mode.


停止錯誤編號: 0x0000003B (parameter, parameter, parameter, parameter) SYSTEM_SERVICE_EXCEPTION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in a system service which was not handled by the system service.


停止錯誤編號: 0x0000003C (parameter, parameter, parameter, parameter) INTERRUPT_UNWIND_ATTEMPTED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an unwind operation was initiated in an interrupt service routine that attempted to unwind through the interrupt dispatcher.


停止錯誤編號: 0x0000003D (parameter, parameter, parameter, parameter) INTERRUPT_EXCEPTION_NOT_HANDLED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in an interrupt service routine which was not handled by the interrupt service routine.


停止錯誤編號: 0x0000003E (parameter, parameter, parameter, parameter) MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates the multiprocessor configuration is not supported. For example, not all processors are at the same level or of the same type. There might also be mismatched coprocessor support.


停止錯誤編號: 0x0000003F (parameter, parameter, parameter, parameter) NO_MORE_SYSTEM_PTES

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates no more system page table entries (PTEs) exist for mapping non-paged entities.


停止錯誤編號: 0x00000040 (parameter, parameter, parameter, parameter) TARGET_MDL_TOO_SMALL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an MDL (memory descriptor list) that was allocated to map a buffer is not large enough to contain the page frame numbers (PFNs) required to map the desired buffer. There might be a problem with the driver.


停止錯誤編號: 0x00000041 (parameter, parameter, parameter, parameter) MUST_SUCCEED_POOL_EMPTY

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates there is no more must-succeed pool.


停止錯誤編號: 0x00000042 (parameter, parameter, parameter, parameter) ATDISK_DRIVER_INTERNAL

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a hard disk device driver internal error.


停止錯誤編號: 0x00000043 (parameter, parameter, parameter, parameter) NO_SUCH_PARTITION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a disk device driver called the I/O system to change a partition type on a specified partition, but the partition does not exist.


停止錯誤編號: 0x00000044 (parameter, parameter, parameter, parameter) MULTIPLE_IRP_COMPLETE_REQUESTS

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to complete an IRP (I/O request packet) more than once, possibly by more than one driver.


停止錯誤編號: 0x00000045 (parameter, parameter, parameter, parameter) INSUFFICIENT_SYSTEM_MAP_REGS

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that an attempt was made to allocate more map registers than are allocated to an adapter.


停止錯誤編號: 0x00000046 (parameter, parameter, parameter, parameter) DEREF_UNKNOWN_LOGON_SESSION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a token was deleted that was not part of any known logon session.


停止錯誤編號: 0x00000047 (parameter, parameter, parameter, parameter) REF_UNKNOWN_LOGON_SESSION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a token was created that was not part of any known logon session.


停止錯誤編號: 0x00000048 (parameter, parameter, parameter, parameter) CANCEL_STATE_IN_COMPLETED_IRP

解釋:
This is a Windows 2000 Executive character-mode STOP message. Indicates that an attempt was made to cancel an IRP (I/O request packet), but the packet had already been completed so it was not possible to cancel it. There might be a problem with the driver. Or, although unlikely, more than one driver might be accessing the same packet.


停止錯誤編號: 0x00000049 (parameter, parameter, parameter, parameter) PAGE_FAULT_WITH_INTERRUPTS_OFF

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a page fault occurred while interrupts were disabled.


停止錯誤編號: 0x0000004A (parameter, parameter, parameter, parameter) IRQL_GT_ZERO_AT_SYSTEM_SERVICE

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to exit from a system service with an IRQL (interrupt request level) greater than 0.


停止錯誤編號: 0x0000004B (parameter, parameter, parameter, parameter) STREAMS_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates an internal error in the Streams environment or in a Streams driver.


停止錯誤編號: 0x0000004C (parameter, parameter, parameter, parameter) FATAL_UNHANDLED_HARD_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. This indicates a fatal hard error (STATUS error) occurred before the hard error handler was available. There are several reasons why this error might occur: a Registry hive file could not be loaded because it is either corrupted or missing; Winlogon or Windows unexpectedly did not start; or a driver or system DLL is corrupted.


停止錯誤編號: 0x0000004D (parameter, parameter, parameter, parameter) NO_PAGES_AVAILABLE

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that there are no physical pages available.


停止錯誤編號: 0x0000004E (parameter, parameter, parameter, parameter) PFN_LIST_CORRUPT

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates the memory management page file number (PFN) list is corrupted.


停止錯誤編號: 0x0000004F (parameter, parameter, parameter, parameter) NDIS_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in the NDIS wrapper or an NDIS driver.


停止錯誤編號: 0x00000050 (parameter, parameter, parameter, parameter) PAGE_FAULT_IN_NONPAGED_AREA

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a page fault in the address space reserved for nonpaged data.


停止錯誤編號: 0x00000051 (parameter, parameter, parameter, parameter) REGISTRY_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a Registry or configuration manager problem. An I/O error might have occurred while the Registry was trying to read one of its files. This could be caused by hardware or file system problems. This message might also appear because of a failure in a refresh operation, which occurs when resource limits are encountered.


停止錯誤編號: 0x00000052 (parameter, parameter, parameter, parameter) MAILSLOT_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a mailslot file system problem.


停止錯誤編號: 0x00000053 (parameter, parameter, parameter, parameter) NO_BOOT_DEVICE

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that no boot driver was successfully initialized.


停止錯誤編號: 0x00000054 (parameter, parameter, parameter, parameter) LM_SERVER_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in the Windows 2000 Server.


停止錯誤編號: 0x00000055 (parameter, parameter, parameter, parameter) DATA_COHERENCY_EXCEPTION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in the primary and secondary data caches.


停止錯誤編號: 0x00000056 (parameter, parameter, parameter, parameter) INSTRUCTION_COHERENCY_EXCEPTION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in the primary and secondary instruction caches.


停止錯誤編號: 0x00000057 (parameter, parameter, parameter, parameter) XNS_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an XNS internal error. You might need to replace your network card.


停止錯誤編號: 0x00000058 (parameter, parameter, parameter, parameter) FTDISK_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in the primary and secondary data caches. This is a fault-tolerant disk driver internal error.


停止錯誤編號: 0x00000059 (parameter, parameter, parameter, parameter) PINBALL_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in the primary and secondary data caches. This is an HPFS problem.


停止錯誤編號: 0x0000005A (parameter, parameter, parameter, parameter) CRITICAL_SERVICE_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a critical service failed to initialize while starting the LastKnownGood control set.


停止錯誤編號: 0x0000005B (parameter, parameter, parameter, parameter) SET_ENV_VAR_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a critical service failed to initialize, but the LastKnownGood environment variable could not be set.


停止錯誤編號: 0x0000005C (parameter, parameter, parameter, parameter) HAL_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 0 initialization of the Hardware Abstraction Layer (HAL) failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.


停止錯誤編號: 0x0000005D (parameter, parameter, parameter, parameter) UNSUPPORTED_PROCESSOR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that there is a processor present that is not supported.


停止錯誤編號: 0x0000005E (parameter, parameter, parameter, parameter) OBJECT_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 0 initialization of the object manager failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.


停止錯誤編號: 0x0000005F (parameter, parameter, parameter, parameter) SECURITY_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 0 security initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.


停止錯誤編號: 0x00000060 (parameter, parameter, parameter, parameter) PROCESS_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 0 process initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.


停止錯誤編號: 0x00000061 (parameter, parameter, parameter, parameter) HAL1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 initialization of the Hardware Abstraction Layer (HAL) failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000062 (parameter, parameter, parameter, parameter) OBJECT1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 initialization of the object manager failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000063 (parameter, parameter, parameter, parameter) SECURITY1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 security initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000064 (parameter, parameter, parameter, parameter) SYMBOLIC_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Symbolic link initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000065 (parameter, parameter, parameter, parameter) MEMORY1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 memory initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000066 (parameter, parameter, parameter, parameter) CACHE_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. 快取 initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000067 (parameter, parameter, parameter, parameter) CONFIG_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Configuration initialization failed because the Registry could not allocate the pool needed to contain the Registry files. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000068 (parameter, parameter, parameter, parameter) FILE_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. File system initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000069 (parameter, parameter, parameter, parameter) IO1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 I/O initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x0000006A (parameter, parameter, parameter, parameter) LPC_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Local procedure call (LPC) initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x0000006B (parameter, parameter, parameter, parameter) PROCESS1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Phase 1 process initialization failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x0000006C (parameter, parameter, parameter, parameter) REFMON_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Reference monitor initialization failed. This can only happen during the relatively short period of time that Windows 2000 Executive is being initialized. There might be a problem with a device driver.


停止錯誤編號: 0x0000006D (parameter, parameter, parameter, parameter) SESSION1_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Session manager virtual memory allocation parameters failed during session manager initialization. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x0000006E (parameter, parameter, parameter, parameter) SESSION2_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. The session manager virtual memory environment failed to initialize. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x0000006F (parameter, parameter, parameter, parameter) SESSION3_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. Session manager process creation failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000070 (parameter, parameter, parameter, parameter) SESSION4_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. During session manager initialization, a resume thread operation failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000071 (parameter, parameter, parameter, parameter) SESSION5_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. During phase 1 initialization of the Windows 2000 Executive, the session manager terminated. This can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.


停止錯誤編號: 0x00000072 (parameter, parameter, parameter, parameter) ASSIGN_DRIVE_LETTERS_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a drive letter assignment failed.


停止錯誤編號: 0x00000073 (parameter, parameter, parameter, parameter) CONFIG_LIST_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration link list failed. One of the core system hives is corrupted or unreadable, or some critical Registry keys and values are not present.


停止錯誤編號: 0x00000074 (parameter, parameter, parameter, parameter) BAD_SYSTEM_CONFIG_INFO

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration information is corrupted.


停止錯誤編號: 0x00000075 (parameter, parameter, parameter, parameter) CANNOT_WRITE_CONFIGURATION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration information cannot be written. The system hive files cannot be expanded to accommodate new data written to it between Registry initialization and phase 1 initialization. There might be no free space on the drive.


停止錯誤編號: 0x00000076 (parameter, parameter, parameter, parameter) PROCESS_HAS_LOCKED_PAGES

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a process terminated with pages locked for I/O.


停止錯誤編號: 0x00000077 (parameter, parameter, parameter, parameter) KERNEL_STACK_INPAGE_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an I/O error during a kernel stack paging operation. The requested page of kernel data could not be read in. This is caused by a bad block in the paging file or by a disk controller error. If the error was caused by a bad block, when your system is restarted, Autocheck will run and attempt to find the bad sector.


停止錯誤編號: 0x00000078 (parameter, parameter, parameter, parameter) PHASE0_EXCEPTION

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception during phase 0 of the Windows 2000 Executive initialization.


停止錯誤編號: 0x00000079 (parameter, parameter, parameter, parameter) Mismatched kernel and hal image.

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a mismatched kernel and Hardware Abstraction Layer (HAL) image.


停止錯誤編號: 0x0000007A (parameter, parameter, parameter, parameter) KERNEL_DATA_INPAGE_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x0000007B (parameter, parameter, parameter, parameter) INACCESSIBLE_BOOT_DEVICE

解釋:
This is a Windows 2000 Executive character-mode STOP message. During I/O system initialization, the driver for the boot device might have failed to initialize the device the system is attempting to start from. It is also possible that the file system failed to initialize because it did not recognize the data on the boot device. If this error occurs during initial system setup, the system might have been installed on an unsupported disk or SCSI controller. Also, this error might occur because of the installation of a new SCSI adapter or disk controller or if the disk was repartitioned with the system partition.


停止錯誤編號: 0x0000007D (parameter, parameter, parameter, parameter) INSTALL_MORE_MEMORY

解釋:
This is a Windows 2000 Executive character-mode STOP message. Windows 2000 requires at least 5 MB of memory to start.


停止錯誤編號: 0x0000007F (parameter, parameter, parameter, parameter) UNEXPECTED_KERNEL_MODE_TRAP

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates that a trap occurred in kernel mode.


停止錯誤編號: 0x00000081 (parameter, parameter, parameter, parameter) SPIN_LOCK_INIT_FAILURE

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000082 (parameter, parameter, parameter, parameter) DFS_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a Distributed file system (Dfs) problem.


停止錯誤編號: 0x00000083 (parameter, parameter, parameter, parameter) OFS_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates an OFS file system problem.


停止錯誤編號: 0x00000084 (parameter, parameter, parameter, parameter) RECOM_DRIVER

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a RECOM driver problem.


停止錯誤編號: 0x00000085 (parameter, parameter, parameter, parameter) SETUP_FAILURE

解釋:
This is a Windows 2000 Executive character-mode STOP message. It indicates a general failure with the setup operation.


停止錯誤編號: 0x0000008F (parameter, parameter, parameter, parameter) PP0_INITIALIZATION_FAILED

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000090 (parameter, parameter, parameter, parameter) PP1_INITIALIZATION_FAILED
解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000091 (parameter, parameter, parameter, parameter) WIN32K_INIT_OR_RIT_FAILURE

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000092 (parameter, parameter, parameter, parameter) UP_DRIVER_ON_MP_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000093 (parameter, parameter, parameter, parameter) INVALID_KERNEL_HANDLE

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000094 (parameter, parameter, parameter, parameter) KERNEL_STACK_LOCKED_AT_EXIT

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000095 (parameter, parameter, parameter, parameter) PNP_INTERNAL_ERROR

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000096 (parameter, parameter, parameter, parameter) INVALID_WORK_QUEUE_ITEM

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000097 (parameter, parameter, parameter, parameter) BOUND_IMAGE_UNSUPPORTED

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000098 (parameter, parameter, parameter, parameter) END_OF_NT_EVALUATION_PERIOD

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x00000099 (parameter, parameter, parameter, parameter) INVALID_REGION_OR_SEGMENT

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x0000009A (parameter, parameter, parameter, parameter) SYSTEM_LICENSE_VIOLATION

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x0000009B (parameter, parameter, parameter, parameter) UDFS_FILE_SYSTEM

解釋:
This is a Windows 2000 Executive character-mode STOP message.


停止錯誤編號: 0x0000009C (parameter, parameter, parameter, parameter) MACHINE_CHECK_EXCEPTION

解釋:
This is a Windows 2000 Executive character-mode STOP message.

找個msdn查查,每個ms的接頭都有一大堆錯誤程式碼
不過這些程式碼我還真沒見過,赫赫

藍天(收集整理)


1.停止錯誤編號:0x0000000A

  說明文字RQL-NOT-LESS-OR-EQUAL

  通常的原因:驅動程式使用了不正確的記憶體位址.

  解決方法:如果無法登陸,則重新啟動電腦.當出現可用的作系統列表時,按F8鍵.在Windows進階選項表單螢幕上,選項"最後一次正確的配置",然後按Enter鍵鍵.
檢查是否正確安裝了所有的新硬體或軟體.如果這是一次全新安裝,請與硬體或軟體的製造商聯繫,獲得可能需要的任何Windows更新或驅動程式.
執行由電腦製造商提供的所有的系統診斷軟體,尤其是記憶體檢查.
禁用或卸掉新近安裝的硬體(RAM,橋接器,硬碟,調製解調器等等),驅動程式或軟體.
確保硬體設備驅動程式和系統BIOS都是最新的版本.
確保製造商可說明 你是否具有最新版本,也可說明 你獲得這些硬體.
禁用 BIOS記憶體選項,例如cache或shadow.

  2.停止錯誤編號:0x0000001E

  說明文字:KMODE-EXPTION-NOT-HANDLED

  通常的原因:內核模式工作試圖執行一個非法或未知的處理器指令.

  解決方法:確保有足夠的空間,尤其是在執行一次新安裝的時候.
如果停止錯誤消息指出了某個特定的驅動程式,那麼禁用他.如果無法啟動電腦.應試著用安全模式啟動,以便刪除或禁用該驅動程式.
  如果有非 Microsoft支持的視瀕驅動程式,盡量切換到標準的VGA驅動程式或Windows提供的適當驅動程式.
  禁用所有新近安裝的驅動程式.
確保有最新版本的系統BIOS.硬體製造商可說明 確定你是否具有最新版本,也可以說明 你獲得他.
BIOS記憶體選項,例如cache,shadow.  

  3.停止錯誤編號:0x00000023或0x00000024

  說明文字:FAT-FILE-SYSTEM或MTFS-FILE-SYSTEM

  通常原因:問題出現在Ntfs.sys(允許系統讀寫NTFS驅動器的驅動程式文件)內.

  解決方法:執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體..
禁用或卸載所有的反病毒軟體,磁碟重組工具或制作備份程序.
通過在命令提示字元下執行Chkdsk /f指令檢查硬碟驅動器是否損壞,然後重新啟動電腦

  4.停止編號:0x0000002E

  說明文字ATA-BUS-ERROR

  通常的原因:系統記憶體奇偶校驗出錯,通常由硬體問題導致.

  解決方法:卸掉所有新近安裝的硬體(RAM.橋接器.硬碟.調製解調器等等).
執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
  確保硬體設備驅動程式和系統BIOS都是最新版本.
  使用硬體供應商提供的系統診斷,執行記憶體檢查來搜尋故障或不匹配的記憶體.
  禁用BIOS記憶體選項,例如cache或shadow.
  在啟動後出現可用作系統列表時,按F8.在Windows進階選項表單螢幕上,選項"啟動VGA模式:.然後按Enter鍵鍵.如果這樣做還不能解決問題,可能需要更換不同的視瀕橋接器列表,有關支持的視瀕橋接器列表,請參閱硬體相容性列表.  

  5.停止編號:0x0000003F

  說明文字:NO-MOR-SYSTEM-PTES

  通常的原因:每喲正確清理驅動程式.

  解決方法:禁用或卸載所有的反病毒軟體,磁牒碎片處理程序或制作備份程序.

  6:停止錯誤編號:0x00000058

  說明文字:FTDISK-INTERN-ERROR

  通常的原因:容錯集內的某個主驅動器發生故障.

解決方法:使用Windows安裝碟啟動電腦,從鏡象(第2)系統驅動器引導.有關如何編輯Boot.ini文件以指向鏡象系統驅動器的指導,可在MIcrosoft支持服務Web站點搜尋"EditARC path".  

  7.停止錯誤編號:0x0000007B

  說明文字NACCESSI-BLE-BOOT-DEVICE

  通常原因:啟始化I/O系統(通常是指引導設備或文件系統)失敗.

  解決方法:啟始扇區病毒通常會導致這種停止錯誤.是用反病毒軟體的最新版本,檢查電腦上是否有存在病毒.如果找到病毒,則必須執行必要的不找把他從電腦上清除掉,請參閱反病毒軟體我的文件瞭解如何執行這些步驟.
  卸下所有新近安裝的硬體(RAM,橋接器,調製解調器等等).
  核對MIcrosoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.
  如果使用的適SCSI橋接器,可以從硬體供應商除獲得最新WINDOWS驅動程式,禁用SCSI設備的同步協商,檢查該SCSI鏈是否終結,並核對這些設備的SCSIID,如果無法確定如何執行能夠這些步驟,可參考硬體設備的我的文件.
  如果你用的是IDE設備,將板上的IDE連接阜定義為唯一的主連接阜.核對IDE設備的主/從/唯一設置.卸掉除硬碟之外的所有IDE設備.如果無法驗證如何執行這些不找,可參考硬體我的文件.
  如果電腦已使用NTFS文件系統格式化,可重新啟動電腦,然後在該系統分區上執行Chkdsk/f/r指令.如果由於錯誤而無法啟動系統,那麼使用指令控制台,並執行Chkdsk /r指令.
  執行Chkdsk /f指令以確定文件系統是否損壞.如果Windows不能執行Chkdsk指令,將驅動器移動到其他執行Windows的電腦上,然後從這台電腦上對該驅動器執行Chkdsk指令.

  8.停止錯誤編號:0x0000007F

  說明文字:UNEXPECTED-KERNEL-MODE-TRAP

  通常的原因:通常是由於硬體或軟體問題導致,但一般都由硬體故障引起的..

  解決方法:核對Microsoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.如果電腦主機板不相容就會產生這個問題.
  卸掉所由新近安裝的硬體.
  執行由電腦製造商提供的所有系統診斷軟體,尤其是記憶體檢查.
  禁用BIOS記憶體選項,例如cache或shadow.  

  9.停止錯誤編號:0x00000050

  說明文字AGE-FAULT-IN-NONPAGED-AREA

  通常的原因:記憶體錯誤(資料不能使用分頁文件交換到磁牒中).

  解決方法:卸掉所有的新近安裝的硬體.
  執行由電腦製造商提供的所有系統診斷軟體.尤其是記憶體檢查.
  檢查是否正確安裝了所有新硬體或軟體,如果這是一次全新安裝,請與硬體或軟體製造商聯繫,獲得可能需要的任何Windows更新或驅動程式.
  禁用或卸載所有的反病毒程序.
  禁用BIOS記憶體選項,例如cache或shadow.

  10.停止錯誤編號:0x0000007

  說明文字:KERNEL-STEL-STACK-INPAGE-ERROR

  通常的原因:無法從分頁文件將內核資料所需的頁面讀取到記憶體中。

  解決方法:使用反病毒軟體的最新版本,檢查電腦上是否有病毒。如果找到病毒,則執行必要的步驟把他從電腦上清除掉。請參閱製造商提供的所有系統診斷軟體,尤其是記憶體檢查。
禁用BIOS記憶體選項,例如cache,shadow.  

  11.停止錯誤編號:0x00000079

  說明文字:MISMATCHED-HAL

  通常的原因:硬體抽像層與內核或機器類型不匹配(通常發生在單處理器和多處理器配置文件混合在同一系統的情況下)。

  解決方法:要解決本錯誤,可使用指令控制台替換電腦上錯誤的系統檔案。
單處理器系統的內核文件是Ntoskml.exe,而多處理器系統的內核文件是Ntkrnlmp.exe,但是,這些文件要與安裝媒體上的文件相對應;在安裝完Windows2000和,不論使用的是哪個原文件,都會被重命名為Ntoskrnl.exe文件。HAL文件在安裝之後也使用名稱Hal.dll但是在安裝媒體,但是在安裝媒體上卻有若干個可能的HAL文件。

  12.停止錯誤編號:0x0000007A

  說明文字:KERNEL-DATA-INPAGE-ERROR

  通常的原因:無法從分頁文件將內核資料所需的頁面讀取到記憶體中。(通常是由於分頁文件上的故障,病毒,磁牒控制器錯誤或由故障的RAM引起的)。

  解決方法:使用反病毒軟體的最新版本,檢查電腦上是否存在病毒。如果找到病毒。則執行必要的步驟把他從電腦上清除掉,請參閱犯病度軟體我的文件瞭解如何執行這些步驟。
如果電腦已使用NTFS文件系統格式化。可重新啟動電腦,然後在該系統分區上執行Chkdsk/f/r指令。如果由於錯誤而無法啟動指令,那麼使用指令控制台,並執行Chkdsk /r指令。
執行由電腦製造商提供的所有的系統在很端軟體,尤其是記憶體檢查。 

  13.停止錯誤編號:0xC000021A

  說明文字:STATUS-SYSTEM-PROCESS-TERMINATED

  通常的原因:用戶模式子系統,例如Winlogon或客戶伺服器執行時子系統(CSRSS)已被損壞,所以無法再保證安全性。

  解決方法:卸掉所有新近安裝的硬體。
如果無法登陸,則重新啟動電腦。當出現可用的作系統列表時按F8。在Windows2000進階選項表單螢幕上,選項:「最後一次正確的配置」。然後按會車。
執行故障恢復台,並允許系統修復任何檢測到的錯誤。

  14.停止錯誤編號:0xC0000221

  說明文字:STATUS-IMAGE-CHECKISU7M-MISMATCH

  通常的原因:驅動程式或系統DLL已經被損壞。

  解決方法:執行故障復控台,並且允許系統修復任何檢測到的錯誤。
如果在RAM增加到電腦之後,立即發生錯誤,那麼可能是分頁文件損壞,或者新RAM由故障或不相容。刪除Pagefile.sys並將系統返回到原來的RAM配置。



程式碼 錯誤信息解釋

0 操作已成功完成。
1 錯誤的函數。
2 系統找不到指定的文件。
3 系統找不到指定的路徑。
4 系統無法開啟文件。
5 拒絕訪問。
6 句柄無效。
7 存儲區控制塊已損壞。
8 可用的存儲區不足,無法執行該指令。
9 存儲區控制塊位址無效。
10 環境錯誤。
11 試圖使用不正確的格式載入程序。
12 訪問程式碼無效。
13 資料無效。
14 可用的存儲區不足,無法完成該操作。
15 系統找不到指定的驅動器。
16 無法刪除該目錄。
17 系統無法將文件移到其他磁牒驅動器上。
18 沒有其他文件。
19 媒體寫保護。
20 系統找不到指定的設備。
21 設備尚未準備好。
22 設備無法識別該指令。
23 資料錯誤(循環冗余檢查)。
24 程序發出指令,但是該指令的長度錯誤。
25 驅動器在磁牒上無法定位指定的區域或磁軌。
26 無法訪問指定的磁牒或軟碟。
27 驅動器找不到所請求的扇區。
28 列印機缺紙。
29 系統無法寫入指定的設備。
30 系統無法讀取指定的設備。
31 與系統連接的設備不能正常運轉。
32 其他工作正使用該檔案,因此現在無法訪問。
33 另一工作已鎖定該檔案的某一部分,因此現在無法訪問。
34 驅動器中的軟碟不正確。 請將 %2 (磁碟區標序列號: %3) 插入驅動器 %1。
36 開啟共享的文件太多。
38 已到達文件結尾。
39 磁牒已滿。
50 不支持此網路請求。
51 遠端電腦無法使用。
52 網路中存在重名。
53 找不到網路路徑。
54 網路正忙。
55 指定的網路資源或設備已不可用。
56 已經達到網路 BIOS 指令的極限。
57 網路橋接器出現錯誤。
58 指定的伺服器無法執行所請求的操作。
59 網路出現意外錯誤。
60 遠端橋接器不相容。
61 列印機貯列已滿。
62 伺服器上沒有存儲等待列印的文件的空間。
63 已經刪除等候列印的文件。
64 指定的網路名無法使用。
65 拒絕訪問網路。
66 網路資源類型錯誤。
67 找不到網路名。
68 已超過本機電腦網路橋接器卡的名稱極限。
69 已超過網路 BIOS 會話的極限。
70 遠端伺服器已經暫停或者正在啟動程序中。
71 由於該電腦的連接數目已達到上限,此時無法再連線到該遠端電腦。
72 指定的列印機或磁牒設備已經暫停。
80 該檔案存在。
82 無法新增該目錄或文件。
83 INT 24 失敗。
84 處理該請求的存儲區不可用。
85 正在使用該本機設備名。
86 指定的網路密碼不正確。
87 參數錯誤。
88 網路出現寫入錯誤。
89 此時系統無法啟動其他工作。
100 無法新增其他系統標誌。
101 屬於其他工作的專用標誌。
102 標誌已經設置,無法關閉。
103 無法再次設置該標誌。
104 中斷時無法請求專用標誌。
105 此標誌先前的所有權已終止。
106 請將軟碟插入驅動器 %1。
107 後續軟碟尚未插入,程序停止。
108 磁牒正在使用或已由其他工作鎖定。
109 管道已經結束。
110 系統無法開啟指定的 設備或文件。
111 檔案名太長。
112 磁牒空間不足。
113 沒有其他可用的內部文件標識符。
114 目標內部文件標識符不正確。
117 該應用程式所執行的 IOCTL 使用不正確。
118 校驗寫入的開關參數值不正確。
119 系統不支持所請求的指令。
120 該系統上不支持此功能。
121 標記已超時。
122 傳給系統使用的資料區域太小。
123 檔案名、目錄名或磁碟區標語法錯誤。
124 系統使用層不正確。
125 磁牒沒有磁碟區標。
126 找不到指定的模組。
127 找不到指定的程序。
128 沒有要等候的子工作。
129 %1 應用程式無法在 Win32 模式下執行。
130 試圖使用操作(而非原始磁牒 I/O)的已開啟磁牒分區的文件句柄。
131 試圖將文件指針移至文件開頭之前。
132 無法在指定的設備或文件中設置文件指針。
133 對於包含已連接驅動器的驅動器,不能使用 JOIN 或 SUBST 指令。
134 試圖在已經連接的驅動器上使用 JOIN 或 SUBST 指令。
135 試圖在已經替換的驅動器上使用 JOIN 或 SUBST 指令。
136 系統試圖刪除尚未連接的驅動器的 JOIN。
137 系統試圖刪除尚未替換的驅動器的替換項。
138 系統試圖將驅動器連線到已連接的驅動器下的目錄。
139 系統試圖將驅動器替換成已替換的驅動器下的目錄。
140 系統試圖將驅動器連線到已替換的驅動器的一個目錄中。
141 系統試圖將驅動器替換成到已連接的驅動器下的目錄。
142 此時系統無法執行 JOIN 或 SUBST。
143 系統無法將驅動器連線到或替換成同一驅動器下的目錄。
144 此目錄不是該根目錄的子目錄。
145 該目錄未清空。
146 指定的路徑已經在替換中使用。
147 資源不足,無法執行該指令。
148 此時無法使用指定的路徑。
149 試圖連接或替換某個驅動器目錄,該驅動器上的某個目錄是上一次替換的目標目錄。
150 CONFIG.SYS 文件未指定系統跟蹤信息,或禁止跟蹤。
151 DosMuxSemWait 的指定信號事件的數目不正確。
152 DosMuxSemWait 沒有執行;已經設置太多的標誌。
153 DosMuxSemWait 列表不正確。
154 輸入的磁碟區標超過目標文件系統的 標號字串長度極限。
155 無法新增其他線程。
156 接收工作拒絕該信號。
157 已經放棄該區域,因此無法鎖定。
158 該區域已經解除鎖定。
159 線程標識符的位址錯誤。
160 傳到 DosExecPgm 的參數字串串錯誤。
161 指定的路徑無效。
162 信號已掛起。
164 系統無法新增其他線程。
167 無法鎖定文件的範圍。
170 所要求的資源正在使用中。
173 鎖定請求對於提供的取消區域不重要。
174 文件系統不支持到鎖定類型的自動更改。
180 系統檢測到錯誤的區域號碼。
182 操作系統無法執行 %1。
183 不能新增已經存在的文件。
186 傳送的標誌不正確。
187 找不到指定的系統信號名稱。
188 操作系統無法執行 %1。
189 操作系統無法執行 %1。
190 操作系統無法執行 %1。
191 無法在 Win32 模式下執行 %1。
192 操作系統無法執行 %1。
193 %1 不是有效的 Win32 應用程式。
194 操作系統無法執行 %1。
195 操作系統無法執行 %1。
196 操作系統無法執行此應用程式。
197 當前無法配置操作系統執行此應用程式。
198 操作系統無法執行 %1。
199 操作系統無法執行此應用程式。
200 程式碼段應小於 64K。
201 操作系統無法執行 %1。
202 操作系統無法執行 %1。
203 系統找不到輸入的環境選項。
205 在指令子樹中的工作沒有信號句柄。
206 檔案名或副檔名太長。
207 環 2 堆棧正在使用中。
208 輸入的全局檔案名字串 * 或 ? 不正確,或指定的全局檔案名字串太多。
209 所傳送的信號不正確。
210 無法設置信號處理程序。
212 區域已鎖定,無法重新分配。
214 附加到此程序或動態連接模組的動態連接模組太多。
215 無法嵌套使用 LoadModule。
216 圖像文件 %1 有效,但不適用於本機類型。
230 管道狀態無效。
231 所有的管道實例都處於忙狀態。
232 管道正在關閉。
233 在管道的另一端沒有工作。
234 有更多可用的資料。
240 已取消會話。
254 指定的擴展屬性內容名無效。
255 擴展屬性內容不一致。
258 等待操作過時。
259 沒有其他可用資料。
266 無法使用複製功能。
267 目錄名無效。
275 擴展屬性內容不匹配緩衝區。
276 所裝載的文件系統上的擴展屬性內容文件已被損壞。
277 擴展屬性內容表格文件已滿。
278 指定的擴展屬性內容句柄無效。
282 安裝的文件系統不支持擴展屬性內容。
288 試圖釋放不屬於使用者的多路同步信號 。
298 信號投遞的次數太多。
299 僅完成部分 ReadProcessMemory 或 WriteProcessMemory 請求。
300 操作鎖定請求被拒絕。
301 系統接收了一個無效的操作鎖定驗證。
317 在 %2 的消息文件中,系統無法找到消息號為 0x%1 的消息文本。
487 試圖訪問無效位址。
534 運算結果超過 32 位。
535 該管道的另一方有一工作。
536 等候工作開啟管道的另一端。
994 拒絕對擴展屬性內容的訪問。
995 由於線程退出或應用程式的要求,I/O 操作異常終止。
996 重疊的 I/O 事件不處於已標記狀態。
997 正在處理重疊的 I/O 操作。
998 對記憶體位置的無效訪問。
999 執行頁內操作出錯。
1001 遞回太深;堆棧溢出。
1002 視窗無法用來傳送消息。
1003 無法完成此項功能。
1004 標誌無效。
1005 磁碟區不包含已識別的文件系統。 請驗證所有需要的文件系統驅動程式都已經載入,而且磁碟區沒有任何損壞。
1006 某文件的磁碟區已在外部改變,因而開啟的文件不再有效。
1007 要求的操作無法以全螢幕模式執行。
1008 試圖引用並不存在的符號。
1009 配置註冊表資料庫已損壞。
1010 配置註冊表主鍵無效。
1011 無法開啟配置註冊表主鍵。
1012 無法讀取配置註冊表主鍵。
1013 無法寫入配置註冊表主鍵。
1014 必須使用日誌文件或其他副本來恢復註冊表資料庫中的某個文件。恢復成功。
1015 註冊表已損壞。可能是一個包含註冊表資料文件的結構已損壞,也可能記憶體中該檔案的系統映像已損壞,或者因為制作備份副本(或日誌)不存在(或損壞)導致無法恢復該檔案。
1016 由註冊表引起的 I/O 操作發生了不可恢復的錯誤。註冊表將不能讀取、寫出或重新整理包含註冊表系統映像的其中一個文件。
1017 系統試圖將文件載入或還原到註冊表中,但是,指定的文件不是註冊表文件格式。
1018 試圖在註冊表鍵(已經標記為刪除)中完成的操作非法。
1019 系統無法在註冊表日誌文件中分配所需的空間。
1020 無法在已經有子鍵或鍵值的註冊表項中新增符號連接。
1021 在易失的父鍵下不能新增固定的子鍵。
1022 通知的更改請求已經完成,並且返回信息還沒有被送到使用者的緩衝區中。使用者需要列舉所有文件以找到改動的內容。
1051 已將停止控制傳送給與其他執行服務相關的服務。
1052 所要求的控制對此服務無效。
1053 服務沒有及時地回應啟動或控制請求。
1054 無法為該服務新增線程。
1055 服務資料庫已鎖定。
1056 該服務的實例已在執行。
1057 帳戶名無效或者不存在,或者指定帳戶名的密碼無效。
1058 服務無法啟動,可能因為被禁用,也可能因為沒有關聯的可用設備。
1059 已經指定了循環服務的從屬關係。
1060 指定的服務不是所安裝的服務。
1061 該服務此時無法接收控制消息。
1062 服務尚未啟動。
1063 服務工作無法連線到服務控制程序。
1064 處理控制請求時,服務出現意外情況。
1065 指定的資料庫不存在。
1066 服務返回服務特定的錯誤碼。
1067 工作意外地終止。
1068 無法啟動從屬服務或組。
1069 由於登錄失敗,沒有啟動服務。
1070 啟動後,服務保持在啟動掛起狀態。
1071 指定的服務資料庫鎖定無效。
1072 指定的服務已經標記為刪除。
1073 指定的服務已經存在。
1074 系統當前正以上一次執行成功的配置執行。
1075 從屬服務不存在,或已經標記為刪除。
1076 已接受使用當前引導作為最後的有效控制設置。
1077 自從上一次啟動以後,沒有再次啟動過該服務。
1078 該名稱已經用作服務名或服務顯示名。
1079 此服務的帳戶不同於執行於同一工作上的其它服務的帳戶。
1080 只能為 Win32 服務設置失敗操作,不能為驅動程式設置。
1081 這個服務所執行的工作和服務控制管理器相同。 所以,如果服務工作意外中止的話,服務控制管理器無法進行任何操作。
1082 這個服務沒有設置恢復程序。
1083 配置成在該可執行程序中執行的這個服務不能執行該服務。
1100 已經到達磁帶的物理盡頭。
1101 磁帶訪問到文件標記。
1102 到達磁帶或分區首部。
1103 磁帶訪問到文件組的末尾。
1104 磁帶上沒有其他資料。
1105 磁帶無法分區。
1106 訪問多重磁碟區分區的新磁帶時,當前的區塊大小不正確。
1107 載入磁帶時,找不到磁帶分區信息。
1108 無法鎖定媒體退出功能。
1109 無法卸載媒體。
1110 驅動器中的媒體已經更改。
1111 已經復位 I/O 總線。
1112 驅動器中沒有媒體。
1113 在目標多字元程式碼頁中不存在對單碼字串的映射。
1114 動態連接庫 (DLL) 啟始化例程失敗。
1115 正在關閉系統。
1116 無法終止系統關機,因為沒有進行中的關機操作。
1117 由於 I/O 設備出現錯誤,無法執行該請求。
1118 串行設備啟始化失敗。將卸載串行驅動程式。
1119 無法開啟正與其他設備共享中斷請求 (IRQ) 的設備。至少有一個使用該 IRQ 的設備已經開啟。
1120 由於再次寫入串行口,串行 I/O 操作已結束。 ( IOCTL_SERIAL_XOFF_COUNTER 為零。)
1121 由於超時,串行 I/O 操作已結束。 (IOCTL_SERIAL_XOFF_COUNTER 未達到零。)
1122 在軟碟上找不到標識符位址標記。
1123 軟碟扇區標識符字段與軟碟控制器磁軌位址不匹配。
1124 軟碟控制器報告軟碟驅動程式不能識別的錯誤。
1125 軟碟控制器返回的結果和註冊的不一致。
1126 訪問硬碟時,再校準操作失敗,再試一次後也無法操作。
1127 訪問硬碟時,磁牒操作失敗,再試一次後仍沒有作用。
1128 訪問硬碟時,需要重啟動磁牒控制器,但仍未成功。
1129 磁帶已捲到盡頭。
1130 可用的伺服器存儲區不足,無法執行該指令。
1131 檢測到潛在的死鎖情況。
1132 指定的基址或文件偏移量沒有正確對齊。
1140 試圖更改系統電源狀態的操作被另一應用程式或驅動程式禁止。
1141 系統 BIOS 無法更改系統電源狀態。
1142 試圖在一文件上新增超過系統允許數額的連接。
1150 指定的程序需要新的 Windows 版本。
1151 指定的程序不是 Windows 或 MS-DOS 程序。
1152 無法啟動指定程序的多個實例。
1153 指定的程序是為 Windows 的早期版本編寫的。
1154 執行此應用程式所需的某個庫文件已損。
1155 沒有應用程式與該操作中所指定的文件關聯。
1156 將指令傳送到應用程式時出現錯誤。
1157 找不到執行此應用程式所需的某個庫文件。
1158 當前工作已使用了 Window 管理器對象的系統允許的所有句柄。
1159 消息只能與同步操作一起使用。
1160 指出的源元素沒有媒體。
1161 指出的目標元素已包含媒體。
1162 指出的元素不存在。
1163 指出的元素是未顯示的存儲資源的一部分。
1164 指出的設備需要重新啟始化,因為硬體有錯誤。
1165 設備顯示在嘗試進一步操作之前需要清除。
1166 設備顯示它的門仍是開啟狀態。
1167 設備沒有連接。
1168 找不到元素。
1169 索引中沒有同指定項相匹配的項。
1170 在對像上不存在指定的屬性內容集。
1171 傳遞到 GetMouseMovePoints 的點不在緩衝區中。
1172 跟蹤(工作站)服務沒執行。
1173 找不到磁碟區 ID。
1175 無法刪除要被替換的文件。
1176 無法將替換文件移到要被替換的文件。要被替換的文件保持原來的名稱。
1177 無法將替換文件移到要被替換的文件。要被替換的文件已被重新命名為制作備份名稱。
1178 磁碟區更改記錄被刪除。
1179 磁碟區更改記錄服務不處於活動中。
1180 找到一份文件,但是可能不是正確的文件。
1181 日誌項已從日誌中刪除。
1200 指定的設備名無效。
1201 設備當前雖然未連接,但它是記憶連接。
1202 試圖記起已經記住的設備。
1203 網路供應商不接受給定的網路路徑。
1204 指定的網路供應商名無效。
1205 無法開啟網路連接配置文件。
1206 網路連接配置文件已損壞。
1207 無法列舉非包容類。
1208 出現擴展錯誤。
1209 指定組名的格式無效。
1210 指定電腦名的格式無效。
1211 指定事件名的格式無效。
1212 指定域名的格式無效。
1213 指定服務名的格式無效。
1214 指定網路名的格式無效。
1215 指定共享名的格式無效。
1216 指定密碼的格式無效。
1217 指定的郵件名無效。
1218 指定郵件目的地的格式無效。
1219 所提供的憑據與現有憑據設置衝突。
1220 試圖與網路伺服器建立會話,但目前與該伺服器建立的會話太多。
1221 網路上的其他電腦已經使用該工作組或域名。
1222 網路不存在或者沒有啟動。
1223 用戶已經取消該操作。
1224 所要求的操作無法在已經開啟用戶映射區域的文件中執行。
1225 遠端系統拒絕網路連接。
1226 已經關閉網路連接。
1227 網路傳輸的終點已經有一個位址與其關聯。
1228 網路終點尚未與位址關聯。
1229 試圖在不存在的網路連接中操作。
1230 試圖在活動的網路連接上進行無效操作。
1231 不能訪問網路位置。有關網路疑難排除的信息,請參閱 Windows 說明 。
1232 不能訪問網路位置。有關網路疑難排除的信息,請參閱 Windows 說明 。
1233 不能訪問網路位置。有關網路疑難排除的信息,請參閱 Windows 說明 。
1234 遠端系統的目標網路端點沒有執行任何服務。
1235 該請求已經終止。
1236 本機系統已經終止網路連接。
1237 無法完成操作。請再試一次。
1238 無法新增到該伺服器的連接,因為已經到達了該帳戶同時連接的最大數目。
1239 試圖在該帳戶未授權的時間內登錄。
1240 尚未授權此帳戶從該站登錄網路。
1241 網路位址無法用於要求的操作。
1242 服務已經註冊。
1243 指定的服務不存在。
1244 由於尚未驗證用戶身份,無法執行要求的操作。
1245 由於用戶尚未登錄網路,無法執行要求的操作。 指定的服務不存在。
1246 繼續工作。
1247 完成啟始化操作後,試圖再次執行啟始化操作。
1248 沒有其他本機設備。
1249 指定的站點不存在。
1250 具有指定名稱的域控制器已經存在。
1251 只有連線到伺服器上時,才支持該操作。
1252 即使沒有改動,群組原則框架也應該使用擴展。
1253 指定的用戶沒有一個有效的配置文件。
1254 Microsoft Small Business Server 不支持此操作。
1300 不是對所有的使用方分配引用特權。
1301 帳戶名與安全標識符之間的映射未完成。
1302 沒有為該帳戶明確地設置系統配額限制。
1303 沒有可用的密鑰。返回已知的密鑰。
1304 密碼太複雜,無法轉換成 LAN Manager 密碼。返回的 LAN Manager 密碼是空字串串。
1305 修訂級別未知。
1306 表示兩個修訂級別不相容。
1307 無法將此安全標識符指定為該對象的擁有者。
1308 無法將此安全標識符指定為主要的對象組。
1309 當前並未模擬客戶的線程試圖操作模擬令牌。
1310 不可以禁用該組。
1311 目前沒有可用的登錄伺服器處理登錄請求。
1312 指定的登錄會話不存在。該會話可能已終止。
1313 指定的權限不存在。
1314 客戶不保留請求的權限。
1315 提供的名稱不是正確的帳戶名稱格式。
1316 指定的用戶已經存在。
1317 指定的用戶不存在。
1318 指定的組已經存在。
1319 指定的組不存在。
1320 或者指定的用戶帳戶已經是某個特定組的成員,或者也可能指定的組非空而不能被刪除。
1321 指定的用戶帳戶不是所指定組帳戶的成員。
1322 上次保留的管理帳戶無法關閉或刪除。
1323 無法更新密碼。所輸入的密碼不正確。
1324 無法更新密碼。所提供的新密碼包含不可用於密碼的值。
1325 無法更新密碼。為新密碼提供的值不符合字串域的長度、複雜性或歷史要求。
1326 登錄失敗: 用戶名未知或密碼錯誤。
1327 登錄失敗: 用戶帳戶限制。
1328 登錄失敗: 違反帳戶登錄時間限制。
1329 登錄失敗: 禁止用戶登錄到該電腦上。
1330 登錄失敗: 指定的帳戶密碼已過期。
1331 登錄失敗: 當前禁用帳戶。
1332 未完成帳戶名與安全性標識符之間的映射。
1333 一次請求的本機用戶標識符(LUID)太多。
1334 沒有其他可用的本機用戶標識符(LUID)。
1335 對這個特定使用來說,安全標識符的子部分是無效的。
1336 訪問控制清單(ACL)結構無效。
1337 安全標識符結構無效。
1338 安全描述符結構無效。
1340 無法新增繼承的訪問控制列表(ACL)或訪問控制項目(ACE)。
1341 當前已禁用伺服器。
1342 當前已啟用伺服器。
1343 所提供的值是無效的標識符授權值。
1344 沒有更多的記憶體用於更新安全信息。
1345 指定的屬性內容無效,或指定的屬性內容與整個組的屬性內容不相容。
1346 或者沒有提供所申請的模仿級別,或者提供的模仿級別無效。
1347 無法開啟匿名級安全性符號。
1348 所請求的驗證信息類別無效。
1349 該類符號不能以所嘗試的方式使用。
1350 無法在沒有相關安全性的對象上執行安全操作。
1351 未能從域控制器讀取配置資訊,或者是因為機器不可使用,或者是訪問被拒絕。
1352 安全帳戶管理程序(SAM)或本機安全頒發機構(LSA)伺服器狀態不正確,所以無法執行安全操作。
1353 域處於執行安全操作的錯誤狀態。
1354 該操作只能在域的主域控制器中執行。
1355 指定的域不存在或聯繫不上。
1356 指定的域已經存在。
1357 試圖超過每個伺服器域數目的極限。
1358 由於嚴重的媒體錯誤或磁牒的資料結構損壞,無法完成所請求的操作。
1359 發生內部錯誤。
1360 通用的訪問類型包含在訪問掩碼中,該掩碼已經映射為非通用類型。
1361 安全性描述符的格式錯誤(絕對或自相關)。
1362 請求的操作只准登錄工作使用。該使用程序並未被記錄為登錄工作。
1363 無法用已經使用的標識符來啟動新的登錄會話。
1364 指定的驗證資料包未知。
1365 登錄會話的狀態與請求的操作不一致。
1366 登錄會話標識符正在使用中。
1367 登錄請求包含無效的登錄類型值。
1368 在使用命名管道讀取資料之前,無法經由該管道模擬。
1369 註冊表子樹的事務狀態與所請求的操作不相容。
1370 突發的內部安全性資料庫故障。
1371 無法在內部帳戶下執行該操作。
1372 無法在該內部特定組中執行該操作。
1373 無法在該內部特定用戶中執行該操作。
1374 因為該組當前是用戶的主要組,所以不能從此組中刪除用戶。
1375 該符號已作為主要符號使用。
1376 指定的本機組不存在。
1377 指定的帳戶名不是本機組的成員。
1378 指定的帳戶名已經是本機組的成員。
1379 指定的本機組已經存在。
1380 登錄失敗: 用戶在本電腦上沒有被授與所需註冊類型。
1381 超過了可以存儲在單個系統中的最大機密限制。
1382 機密的長度超過了最大允許值。
1383 本機安全授權資料庫包含內部不一致的錯誤。
1384 登錄時,用戶的安全性上下文累積太多的安全標識符。
1385 登錄失敗: 用戶在本電腦上沒有被授與所需註冊類型。
1386 經交叉加密的密碼必須更改用戶密碼。
1387 成員不存在,因此無法將其增加到本機組或從中刪除。
1388 新成員的帳戶類型有誤,因此無法將其增加到本機組。
1389 指定的安全標識符太多。
1390 經交叉加密的密碼必須更改該用戶密碼。
1391 表示 ACL 沒有可繼承的組件。
1392 文件或目錄已損壞,無法讀取資料。
1393 磁牒結構已損壞,無法讀取資料。
1394 指定的登錄會話沒有用戶會話密鑰。
1395 正在訪問的服務允許特定數目的連接。 因為連接的數目已達到服務可接受的數目,所以此時無法新增新的服務連接。
1396 登錄失敗: 該目標帳戶名稱不正確。
1397 相互身份驗證失敗。該伺服器在域控制器的密碼過期。
1398 在客戶端機和伺服器之間有一個時間差。
1400 視窗句柄無效。
1401 表單句柄無效。
1402 游標句柄無效。
1403 加速鍵表的句柄無效。
1404 掛接句柄無效。
1405 多重視窗位置結構句柄無效。
1406 無法新增最上層的子視窗。
1407 找不到視窗類。
1408 視窗無效;屬於其他線程。
1409 已經註冊熱鍵。
1410 類已經存在。
1411 類不存在。
1412 類視窗仍開啟著。
1413 索引無效。
1414 圖示句柄無效。
1415 使用私人對話視窗視窗字。
1416 找不到列表框標識符。
1417 找不到任何萬用字元。
1418 線程沒有開啟剪貼板。
1419 尚未註冊熱鍵。
1420 該視窗不是有效的對話視窗視窗。
1421 找不到控制標識符。
1422 由於沒有編輯控制,因此該組合框的消息無效。
1423 視窗不是組合框。
1424 高度必須小於 256。
1425 設備上下文(DC)句柄無效。
1426 掛接程序類型無效。
1427 掛接程序無效。
1428 不能在無模組句柄的情況下設置非本機的掛接。
1429 只能全局設置該掛接程序。
1430 已安裝日記掛接程序。
1431 未安裝掛接程序。
1432 單選列表框的消息無效。
1433 LB_SETCOUNT 傳送到活動的列表框。
1434 該列表框不支持製表符。
1435 無法破壞由其他線程所新增的對象。
1436 子視窗不能有表單。
1437 視窗沒有系統表單。
1438 消息框樣式無效。
1439 系統範圍內的(SPI_*)的參數無效。
1440 螢幕已經鎖定。
1441 多重視窗位置結構中所有視窗句柄必須具有相同的父視窗。
1442 視窗不是子視窗。
1443 GW_* 指令無效。
1444 線程標識符無效。
1445 無法處理非多我的文件接頭(MDI)視窗的消息。
1446 彈出式表單已啟動。
1447 視窗沒有捲軸。
1448 捲軸範圍不能大於 MAXLONG。
1449 無法以指定的方式顯示或關閉視窗。
1450 系統資源不足,無法完成所請求的服務。
1451 系統資源不足,無法完成所請求的服務。
1452 系統資源不足,無法完成所請求的服務。
1453 配額不足,無法完成請求的服務。
1454 配額不足,無法完成請求的服務。
1455 頁面交換文件太小,無法完成此項操作。
1456 找不到表單項。
1457 鍵盤佈局句柄無效。
1458 不允許使用掛鉤類型。
1459 該操作需要交互式視窗工作站。
1460 由於超時時間已過,該操作返回。
1461 無效監視器句柄。
1500 事件日誌文件已損壞。
1501 無法開啟事件日誌文件,因此無法啟動事件記錄服務。
1502 事件日誌文件已滿。
1503 事件日誌文件在兩次讀取操作間已發生變化。
1601 無法訪問 Windows 安裝服務。請與技術支持人員聯繫,驗證 Windows 安裝服務是否註冊正確。
1602 用戶取消了安裝。
1603 安裝時發生嚴重錯誤。
1604 安裝已掛起,未完成。
1605 這個操作只對當前安裝的產品有效。
1606 功能 ID 未註冊。
1607 組件 ID 未註冊。
1608 未知屬性內容。
1609 句柄處於不正確的狀態。
1610 這個產品的配置資料已損壞。請與技術支持人員聯繫。
1611 組件限制語不存在。
1612 這個產品的安裝來源無法使用。請驗證來源是否存在,是否可以訪問。
1613 Windows 安裝服務無法安裝這個安裝程序包。您必須安裝含有 Windows 安裝服務新版本的 Windows Service Park。
1614 產品已卸載。
1615 SQL 查詢語法不正確或不被支持。
1616 記錄字串域不存在。
1617 設備已被刪除。
1618 正在進行另一個安裝操作。請在繼續這個安裝操作之前完成那個操作。
1619 未能開啟這個安裝程序包。請驗證程序包是否存在,是否可以訪問;或者與應用程式供應商聯繫,驗證這是否是有效的 Windows 安裝程序包。
1620 未能開啟這個安裝程序包。請與應用程式供應商聯繫,驗證這是否是有效的 Windows 安裝程序包。
1621 啟動 Windows 安裝服務用戶界面時有錯誤。請與技術支持人員聯繫。
1622 開啟安裝日誌文件時出錯。請驗證指定的日誌文件位置是否存在,是否可以寫入。
1623 安裝程序包的語言不受系統支持。
1624 套用變換時出錯。請驗證指定的變換路徑是否有效。
1625 系統原則禁止這個安裝。請與系統管理員聯繫。
1626 無法執行函數。
1627 執行期間,函數出了問題。
1628 指定了無效的或未知的表格。
1629 提供的資料類型不對。
1630 這個類型的資料不受支持。
1631 Windows 安裝服務未能啟動。請與技術支持人員聯繫。
1632 臨時資料夾已滿或無法使用。請驗證臨時資料夾是否存在,是否可以寫入。
1633 這個處理器類型不支持該安裝程序包。請與產品供應商聯繫。
1634 組件沒有在這台電腦上使用。
1635 無法開啟修補程式包。請驗證修補程式包是否存在,是否可以訪問;或者與應用程式供應商聯繫,驗證這是否是有效的 Windows 安裝修補程式包。
1636 無法開啟修補程式包。請與應用程式供應商聯繫,驗證這是否是有效的 Windows 安裝修補程式包。
1637 Windows 安裝服務無法處理這個修補程式包。您必須安裝含有 Windows 安裝服務新版本的 Windows Service Pack。
1638 已安裝這個產品的另一個版本。這個版本的安裝無法繼續。要配置或刪除這個產品的現有版本,請用「控制台」上的「增加/刪除程式」。
1639 無效的指令行參數。有關詳細的指令行說明 ,請查閱 Windows 安裝服務的 SDK。
1640 在終端服務遠端會話期間,只有管理員有增加、刪除或配置伺服器軟體的權限。如果您要在伺服器上安裝或配置軟體,請與網路管理員聯繫。
1641 要求的操作已成功結束。要使改動生效,必須重新啟動系統。
1642 Windows 安裝服務無法安裝昇級修補程式,因為被昇級的程序丟失,或者昇級修補程式將更新此程序的其他版本。請驗證要被昇級的程序在您的電腦上且您的昇級修補程式是正確的。
1700 串綁定無效。
1701 綁定句柄的類型錯誤。
1702 綁定句柄無效。
1703 不支持 RPC 傳輸協定順序。
1704 RPC 傳輸協定序列無效。
1705 字串串的全球唯一標識符(UUID)無效。
1706 終點的格式無效。
1707 網路位址無效。
1708 未找到終點。
1709 超時設置值無效。
1710 找不到該對象的全球唯一標識符(UUID)。
1711 該對象的全球唯一標識符(UUID)已經註冊。
1712 這一類型的全球唯一標識符(UUID)已經註冊。
1713 RPC 伺服器正在監聽。
1714 尚未註冊傳輸協定順序。
1715 RPC 伺服器不處於監聽狀態。
1716 管理程序的類型未知。
1717 接頭未知。
1718 沒有綁定。
1719 沒有傳輸協定序列。
1720 無法新增終點。
1721 資源不足,無法完成該操作。
1722 RPC 伺服器無法使用。
1723 RPC 伺服器太忙,無法完成此項操作。
1724 網路選項無效。
1725 該線程中不存在活動的遠端程序使用。
1726 遠端程序使用失敗。
1727 遠端程序使用失敗並且無法執行。
1728 遠端程序使用(RPC)傳輸協定出現錯誤。
1730 RPC 伺服器不支持傳輸語法。
1732 不支持這種類型的全球唯一標識符。
1733 標識無效。
1734 陣列邊界無效。
1735 綁定類型中不包含項目名。
1736 名稱語法無效。
1737 不支持這種命名語法。
1739 沒有可用的網路位址,無法新增全球唯一標識符(UUID)。
1740 終結點重複。
1741 身份驗證類型未知。
1742 使用次數的上限太小。
1743 字串串太長。
1744 找不到 RPC 傳輸協定序列。
1745 程序號超出範圍。
1746 此次綁定不包含任何身份驗證信息。
1747 身份驗證服務未知。
1748 身份驗證級別未知。
1749 安全描述符無效。
1750 身份驗證服務未知。
1751 項目無效。
1752 伺服器的終結點無法執行此項操作。
1753 終點的映射器沒有更多的終點可用。
1754 沒有匯出任何接頭。
1755 項目名不完整。
1756 版本選項無效。
1757 沒有其他成員。
1758 可以匯出全部內容。
1759 未找到接頭。
1760 項目已經存在。
1761 項目找不到。
1762 名稱服務不可用。
1763 網路位址集無效。
1764 不支持請求的操作。
1765 沒有可供冒仿的安全性描述符。
1766 遠端程序使用(RPC)出現內部錯誤。
1767 RPC 伺服器企圖進行整除零運算。
1768 RPC 伺服器出現尋址錯誤。
1769 RPC 伺服器中的浮點運算造成被零除。
1770 RPC 伺服器產生了浮點下溢錯誤。
1771 RPC 伺服器產生了浮點上溢錯誤。
1772 可用於自動句柄綁定的 RPC 伺服器列表已經用完。
1773 無法開啟字串轉換表文件。
1774 包含字串轉換表的文件小於 512 個字元。
1775 在遠端程序使用中,客戶端機向主機傳送了一個空的描述體句柄。
1777 遠端程序使用中的描述體句柄發生變化。
1778 傳送到遠端程序使用的綁定句柄不匹配。
1779 佔位程序無法獲得遠端程序使用的句柄。
1780 將空的參考指針傳送給佔位程序。
1781 列舉值超出範圍。
1782 字元數目太小。
1783 佔位程序接收到錯誤資料。
1784 所提供的用戶緩衝區對所申請的操作無效。
1785 無法識別磁牒媒體。它可能還未格式化。
1786 工作站沒有信任密碼。
1787 伺服器上的安全資料庫中沒有該工作站信任關係的電腦帳戶。
1788 建立主域和受托域間的信任關係失敗。
1789 建立工作站和主域間的信任關係失敗。
1790 網路登錄失敗。
1791 該線程執行程序中已經進行了遠端程序使用。
1792 試圖登錄網路,但網路登錄服務尚未啟動。
1793 用戶帳戶已到期。
1794 重定向程序正在使用,無法卸載。
1795 已經安裝所指定的列印機驅動程式。
1796 指定的連接阜未知。
1797 列印機驅動程式未知。
1798 列印處理程序未知。
1799 指定的分隔符文件無效。
1800 指定的優先級無效。
1801 列印機名無效。
1802 列印機已經存在。
1803 列印機指令無效。
1804 指定的資料類型無效。
1805 指定的環境無效。
1806 沒有其他綁定。
1807 使用的帳戶是跨網路的信任帳戶。請使用全局用戶帳戶或本機用戶帳戶來訪問此伺服器。
1808 所使用的帳戶是電腦帳戶。請使用全局用戶帳戶或本機用戶帳戶來訪問該伺服器。
1809 使用的帳戶是伺服器信任帳戶。請使用全局用戶帳戶或本機用戶帳戶來訪問該伺服器。
1810 指定的域名或安全標識符與域的信任信息不一致。
1811 伺服器正在使用中,無法卸載。
1812 指定的映像文件不包含資源部分。
1813 在映像文件中找不到指定的資源類型。
1814 在映像文件中找不到指定的資源名稱。
1815 在映像文件中找不到指定的資源語言 ID 。
1816 可用的配額不足,無法執行該指令。
1817 沒有已註冊的接頭。
1818 遠端程序使用被取消。
1819 綁定句柄不包含所有需要的信息。
1820 遠端使用程序中發生通訊失敗。
1821 所需的身份驗證級別不被支持。
1822 主要的名稱沒有註冊。
1823 指定的錯誤不是有效的 Windows RPC 錯誤程式碼。
1824 已分配僅在本機上有效的 UUID。
1825 產生了特定的安全包錯誤。
1826 沒有取消線程。
1827 在編碼/解碼處理時的操作無效。
1828 序列化軟體包的版本不相容。
1829 RPC 佔位程序的版本不相容。
1830 RPC 管道對像無效或已損壞。
1831 試圖在 RPC 管道對像上進行無效操作。
1832 不被支持的 RPC 管道版本。
1898 找不到組成員。
1899 無法新增終結點映射資料庫條目。
1900 對象的全球標識符(UUID)為空。
1901 指定的時間無效。
1902 指定的表單名無效。
1903 指定的表單大小無效。
1904 指定的列印機句柄正在等候處理
1905 指定的列印機已經刪除。
1906 列印機的狀態無效。
1907 用戶首次登錄前,必須先更改其密碼。
1908 找不到該域的域控制器。
1909 引用的帳戶目前被鎖定,可能無法登錄。
1910 沒有發現指定的此對像匯出者。
1911 沒有發現指定的對象。
1912 沒有發現指定的對象解析器。
1913 一些待發資料仍停留在請求緩衝區內。
1914 無效的異步遠端程序使用句柄。
1915 這個操作的異步 RPC 使用句柄不正確。
1916 RPC 管道對像已經關閉。
1917 RPC 使用在全部的管道都被處理之前完成。
1918 沒有其他可用的資料來自 RPC 管道。
1919 這個機器沒有可用的站點名。
1920 系統無法訪問此文件。
1921 系統無法解析檔案名。
1922 項目不是所要的類型。
1923 無法將所有對象的 UUID 匯出到指定的項。
1924 無法將接頭匯出到指定的項。
1925 無法增加指定的配置文件項。
1926 無法增加指定的配置文件元素。
1927 無法刪除指定的配置文件元素。
1928 無法增加組元素。
1929 無法刪除組元素。
2000 像素格式無效。
2001 指定的驅動程式無效。
2002 該操作的視窗樣式或類屬性內容無效。
2003 不支持請求的圖元文件操作。
2004 不支持請求的轉換操作。
2005 不支持請求的剪輯操作。
2010 指定的顏色管理模組無效。
2011 指定的顏色文件配置無效。
2012 找不到指定的標識。
2013 所需的標識不存在。
2014 指定的標識已經存在。
2015 指定的顏色文件配置與任何設備都不相關。
2016 找不到該指定的顏色文件配置。
2017 指定的顏色空間無效。
2018 圖像顏色管理沒有啟用。
2019 在刪除該顏色轉換時有一個錯誤。
2020 指定的顏色轉換無效。
2021 指定的轉換與位圖的顏色空間不匹配。
2022 指定的命名顏色索引在配置文件中不存在。
2108 網路連接已成功,但需要提示用戶輸入一個不同於原始指定的密碼。
2202 指定的用戶名無效。
2250 網路連接不存在。
2401 在這個網路連接上已存在開啟的文件或未處理的請求。
2402 活動的連接仍然存在。
2404 設備正由活動工作使用,無法中斷連線連接。
3000 指定的列印監視程序未知。
3001 指定的列印機驅動程式正在使用中。
3002 找不到假離線檔案。
3003 沒有發出 StartDocPrinter 使用。
3004 尚未發出 AddJob 使用。
3005 指定的列印處理程序已經安裝。
3006 指定的列印監視程序已經安裝。
3007 該指定的列印監視器不具備所要求的功能。
3008 指定的列印機監視器正在使用中。
3009 當列印機有作業排成貯列時此操作請求是不允許的。
3010 請求的操作成功。只有重新啟動系統,更改才會生效。
3011 請求的操作成功。只有重新啟動服務,更改才會生效。
3012 找不到列印機
4000 WINS 在處理指令時遇到執行錯誤。
4001 無法刪除本機的 WINS。
4002 從文件引入失敗。
4003 制作備份失敗。以前執行過完整的制作備份嗎?
4004 制作備份失敗。請檢查制作備份資料庫的目標目錄。
4005 名稱在 WINS 資料庫中不存在。
4006 不允許進行未配置部分的複製。
4100 DHCP 客戶獲得一個在網上已被使用的 IP 位址。直到 DHCP 客戶可以獲得新的位址前,本機接頭將被禁用。
4200 WMI 資料提供程序不能識別傳來的 GUID 是否有效。
4201 WMI 資料提供程序無法識別傳來的實例名是否有效。
4202 WMI 資料提供程序無法識別傳來的資料項目標識符是否有效。
4203 無法完成 WMI 請求,請重試一次。
4204 找不到 WMI 資料提供程序。
4205 WMI 資料提供程序引用到一個未註冊的實例組。
4206 WMI 資料塊或事件通知已啟用。
4207 WMI 資料塊不再可用。
4208 WMI 資料服務無法使用。
4209 WMI 資料提供程序無法完成請求。
4210 WMI MOF 信息無效。
4211 WMI 註冊信息無效。
4212 WMI 資料塊或事件通知已禁用。
4213 WMI 資料項目或資料塊為只讀。
4214 WMI 資料項目或資料塊不能更改。
6118 該工作組的伺服器列表當前不可用。
6200 要正常執行,排定的工作程序服務的配置必須在系統帳戶中執行。單獨的任務可以被配置成在其他帳戶中執行。
7001 指定的會話名無效。
7002 指定的傳輸協定驅動程式無效。
7003 在系統路徑上找不到指定的傳輸協定驅動程式。
7004 在系統路徑上找不到指定的終端連接驅動程式。
7005 不能為這個會話新增一個事件日誌的註冊鍵。
7006 同名的一個服務已經在系統中存在。
7007 在會話上一個關閉操作掛起。
7008 沒有可用的輸出緩衝器。
7009 找不到 MODEM.INF 文件。
7010 在 MODEM.INF 中沒有找到調製解調器名稱。
7011 調製解調器沒有接受傳送給它的指令。驗證配置的調製解調器與連接的調製解調器是否匹配。
7012 調製解調器沒有回應傳送給它的指令。驗證該調製解調器是否接線正確並且開啟了電源開關。
7013 由於中斷連線連接,載波檢測失敗或載波停止。
7014 在要求的時間內沒有發現撥號音。確定電話線連接正確並可使用。
7015 在遠端站點回叫時檢測到了占線信號。
7016 在回叫時遠端站點上檢測到了聲音。
7017 傳輸驅動程式錯誤
7022 找不到指定的會話。
7023 指定的會話名稱已處於使用中。
7024 由於終端連接目前正在忙於處理一個連接、中斷連線連接、復位或刪除操作,無法完成該請求的操作。
7025 試圖連線到其視瀕模式不受當前客戶支持的會話。
7035 應用程式嘗試啟動 DOS 圖形模式。 不支持 DOS 圖形模式。
7037 您的交互式登錄權限已被禁用。 請與您的管理員聯繫。
7038 該請求的操作只能在系統控制台上執行。 這通常是一個驅動程式或系統 DLL 要求直接控制台訪問的結果。
7040 客戶未能對伺服器連接消息作出回應。
7041 不支持中斷連線控制台會話。
7042 不支持重新將一個中斷連線的會話連線到控制台。
7044 遠端控制另一個會話的請求被拒絕。
7045 拒絕請求的會話訪問。
7049 指定的終端連接驅動程式無效。
7050 不能遠端控制請求的會話。 這也許是由於該會話被中斷或目前沒有一個用戶登錄。 另外,您不能從該系統控制台遠端控制一個會話或遠端控制系統控制台。 並且,您不能遠端控制您自己的當前會話。
7051 該請求的會話沒有配置成允許遠端控制。
7052 連線到這個終端伺服器的申請被拒絕。終端伺服器客戶許可證目前正在被另一個用戶使用。 請與系統管理員聯繫,獲取一份新的終端伺服器客戶,其許可證號碼必須是有效的、唯一的。
7053 連線到這個終端伺服器的申請被拒絕。還沒有為這份終端伺服器客戶輸入您的終端伺服器客戶許可證號碼。 請與系統管理員聯繫,為該終端伺服器客戶輸入一個有效的、唯一的許可證號碼。
7054 系統已達到其授權的登錄限制。 請以後再試一次。
7055 您正在使用的客戶沒有使用該系統的授權。您的登錄請求被拒絕。
7056 系統許可證已過期。您的登錄請求被拒絕。
psac 目前離線  
送花文章: 3, 收花文章: 1631 篇, 收花: 3205 次
舊 2003-06-10, 02:59 PM   #2 (permalink)
wty741
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

感謝大大的教學<感恩>
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
舊 2003-06-10, 10:53 PM   #3 (permalink)
oya999
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

真好的教材,感謝您
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
舊 2003-06-11, 10:59 PM   #4 (permalink)
cdjiunn
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

謝謝分享
留下參考
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
舊 2003-06-13, 10:36 PM   #5 (permalink)
9151002
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

3Q
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
舊 2003-06-18, 11:52 PM   #6 (permalink)
長老會員
 
prolau 的頭像
榮譽勳章
UID - 6277
在線等級: 級別:22 | 在線時長:593小時 | 升級還需:28小時級別:22 | 在線時長:593小時 | 升級還需:28小時級別:22 | 在線時長:593小時 | 升級還需:28小時級別:22 | 在線時長:593小時 | 升級還需:28小時級別:22 | 在線時長:593小時 | 升級還需:28小時級別:22 | 在線時長:593小時 | 升級還需:28小時級別:22 | 在線時長:593小時 | 升級還需:28小時
註冊日期: 2002-12-08
住址: 鳶弋翔之∼∼大雪紛飛
文章: 186
精華: 0
現金: 12 金幣
資產: 169857 金幣
預設

真是好教材,感謝您的指導!
__________________
 
 
   http://avatar.xuite.net/12450630  Here is prolau saying !
prolau 目前離線  
送花文章: 190, 收花文章: 7 篇, 收花: 60 次
舊 2003-06-19, 09:21 PM   #7 (permalink)
9151002
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

謝謝您的分享

受益良多
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
舊 2003-06-20, 02:48 AM   #8 (permalink)
plzark
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

謝啦
整理的這麼詳細
受用無窮
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
舊 2003-06-21, 12:49 PM   #9 (permalink)
長老會員
榮譽勳章
UID - 19924
在線等級: 級別:12 | 在線時長:203小時 | 升級還需:18小時級別:12 | 在線時長:203小時 | 升級還需:18小時
註冊日期: 2002-12-30
住址: kaohsung
文章: 183
精華: 0
現金: 15762 金幣
資產: 20762 金幣
預設

謝謝您的分享.
welcomehcc 目前離線  
送花文章: 502, 收花文章: 1 篇, 收花: 1 次
舊 2003-08-03, 03:27 PM   #10 (permalink)
linlili
榮譽勳章

勳章總數
UID -
在線等級:
文章: n/a
精華:
預設

由衷感謝您
 
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
 


主題工具
顯示模式

發表規則
不可以發文
不可以回覆主題
不可以上傳附加檔案
不可以編輯您的文章

論壇啟用 BB 語法
論壇啟用 表情符號
論壇啟用 [IMG] 語法
論壇禁用 HTML 語法
Trackbacks are 禁用
Pingbacks are 禁用
Refbacks are 禁用

相似的主題
主題 主題作者 討論區 回覆 最後發表
linux - 完全用Linux工作 psac 作業系統操作技術文件 10 2006-10-02 04:41 AM
用Windows XP的原位昇級安裝解決系統問題 psac 作業系統操作技術文件 3 2006-08-20 07:59 PM
Windows PreInstallation Environment深入研究 psac 作業系統操作技術文件 1 2006-02-08 05:03 PM
WINDOWS XP調整、設定、最佳化全攻略 psac 作業系統操作技術文件 8 2005-01-11 08:55 PM
Windows XP鮮為人知的70招 psac 作業系統操作技術文件 13 2004-01-02 01:10 PM


所有時間均為台北時間。現在的時間是 06:52 PM


Powered by vBulletin® 版本 3.6.8
版權所有 ©2000 - 2024, Jelsoft Enterprises Ltd.


SEO by vBSEO 3.6.1