[新手問]如何安裝驅動程式

1985Linux.zip裡的安裝說明
真不知道ASUS沒事壓二層做啥= =??
解開來後裡面有個INSTSALL的文字檔裡面有說明
截取一段︰
Quick install
=============

1) You must have full configured source for the Linux kernel which you
want to use for the ALSA drivers. Note that ALSA drivers are part
of the kernel, so there is necessary to resolve all symbol dependencies
between the used kernel and ALSA driver code. Partly installed kernels
(for example from distributor makers) can be unuseable for this action.
2) You must turn on sound support (soundcore module).
3) Run './configure' script.
If you have ISA Plug & Play soundcard, use --with-isapnp=yes switch.
If you want sequencer support, use --with-sequencer=yes switch.
If you do not want OSS/Free emulation, use --with-oss=no switch.
If you want turn on debug mode use --with-debug=full switch.
If you want debug soundcard detection try --with-debug=detect switch.
If you have kernel source code in another directory than /usr/src/linux,
use --with-kernel=<kernel_directory>.
Example: ./configure --with-isapnp=yes --with-debug=full
4) Run 'make install'.
5) Run the './snddevices' script to create new sound devices in /dev directory.
Skip this step, if you have a kernel with the DEVFS support.
6) Edit your /etc/modules.conf (see the kmod support section below).
7) Run 'modprobe snd-xxxx' where xxxx is the name of your card.
Note: If you have a ISA PnP soundcard you need to first run the isapnp
program from isapnptools package to initialize your
soundcard. You can also use the native ISA PnP support by
using the --with-isapnp=yes configuration switch, in which
case you do not need the isapnptools package.

You can also look at the utils/alsasound file. This script is designed for
the RedHat distribution, but it can be used with other distributions which
use System V style rc init scripts.

Note: All mixer channels are muted by default. You must use a native
or OSS mixer program to unmute appropriate channels (for example a
mixer from the alsa-utils package).

Note: This document notices the /etc/modules.conf file. Many current
distributions uses the old /etc/conf.modules file. Both names are
valid.

另一個檔046_Linux.zip裡也有 readme可以看
裡面看了一下說的很詳細，照著做我想就可以了。
如果要學Linux的話，最好是先習慣看英文訊習和英文文件。裡面的單字絕對比聯考容易的多，所以不要怕他