求助 - OUT MEMORY???

[Admin1]

還有這篇可以看看 XD

http://www.aumha.org/win5/a/xpvm.php


重點：

1. The setting for Maximum Size of the page file is too low, or there is not enough disk space free to expand it to that size.
   
   
   
2. The page file has become corrupt, possibly at a bad shutdown. In the Virtual Memory settings, set to “No page file,” then exit System Properties, shut down the machine, and reboot. Delete PAGEFILE.SYS (on each drive, if more than just C: ), set the page file up again and reboot to bring it into use.
   
   
3. The page file has been put on a different drive without leaving a minimal amount on C:.
   
   
4. There is trouble with third party software. In particular, if the message happens at shutdown, suspect a problem with Symantec’s Norton Live update, for which there is a fix posted here. It is also reported that spurious messages can arise if NAV 2004 is installed. If the problem happens at boot and the machine has an Intel chipset, the message may be caused by an early version (before version 2.1) of Intel’s “Application Accelerator.” Uninstall this and then get an up-to-date version from Intel’s site.
   
   
5. Another problem involving Norton Antivirus was recently discovered by MS-MVP Ron Martell. However, it only applies to computers where the pagefile has been manually resized to larger than the default setting of 1.5 times RAM — a practice we discourage. On such machines, NAV 2004 and Norton Antivirus Corporate 9.0 can cause your computer to revert to the default settings on the next reboot, rather than retain your manually configured settings. (Though this is probably an improvement on memory management, it can be maddening if you don’t know why it is happening.) Symantec has published separate repair instructions for computers with NAV 2004 and NAV Corporate 9.0 installed. [Added by JAE 2/21/06.]
   
   
6. Possibly there is trouble with the drivers for IDE hard disks; in Device Manager, remove the IDE ATA/ATAPI controllers (main controller) and reboot for Plug and Play to start over.
   
   
7. With an NTFS file system, the permissions for the page file’s drive’s root directory must give “Full Control” to SYSTEM. If not, there is likely to be a message at boot that the system is “unable to create a page file.”

[Pichumax]

根據我的破英文來看
1.有可能是虛擬記憶體的設定值太低
或是在壓縮時,剛檔案所存在的磁碟空間不足
假設要把一個512MB的檔案壓縮,檔案存在的該磁碟最少還需要512MB以上的空間
這樣壓縮程式才能順利進行壓縮

2.虛擬記憶體的問題,請嘗試把虛擬記憶體設置到別的硬碟分割區,並把C槽的虛擬記憶體設定關閉
記得重新開機以讓設定完成

3.
如果有裝Intel那個Application Accelerator(2.1版之前),據說可以加速應用程式的效能
請移除掉看看,若真的有需要該程式,請更新到比較新的版本

[superxboy]

作者: Pichumax

根據我的破英文來看
1.有可能是虛擬記憶體的設定值太低
或是在壓縮時,剛檔案所存在的磁碟空間不足
假設要把一個512MB的檔案壓縮,檔案存在的該磁碟最少還需要512MB以上的空間
這樣壓縮程式才能順利進行壓縮

2.虛擬記憶體的問題,請嘗試把虛擬記憶體設置到別的硬碟分割區,並把C槽的虛擬記憶體設定關閉
記得重新開機以讓設定完成

3.
如果有裝Intel那個Application Accelerator(2.1版之前),據說可以加速應用程式的效能
請移除掉看看,若真的有需要該程式,請更新到比較新的版本

+1...我也認為是虛擬記憶體的問題...

我遇到此類情形...都是把虛擬記憶體手動調整後...便不再出現

虛擬記憶體的大小以實體記憶體乘於2或3倍為最佳值...

[小龍女]

作者: superxboy

+1...我也認為是虛擬記憶體的問題...

我遇到此類情形...都是把虛擬記憶體手動調整後...便不再出現

虛擬記憶體的大小以實體記憶體乘於2或3倍為最佳值...

請問

您是怎麼手調的?

我弄了老半天都還是一樣

我的是 XP SP2

煩請詳細指導

謝謝

[小龍女]

作者: Pichumax

根據我的破英文來看
1.有可能是虛擬記憶體的設定值太低
或是在壓縮時,剛檔案所存在的磁碟空間不足
假設要把一個512MB的檔案壓縮,檔案存在的該磁碟最少還需要512MB以上的空間
這樣壓縮程式才能順利進行壓縮

2.虛擬記憶體的問題,請嘗試把虛擬記憶體設置到別的硬碟分割區,並把C槽的虛擬記憶體設定關閉
記得重新開機以讓設定完成

3.
如果有裝Intel那個Application Accelerator(2.1版之前),據說可以加速應用程式的效能
請移除掉看看,若真的有需要該程式,請更新到比較新的版本

3. 沒裝這個... 也沒聽說過這個軟體

2. sorry.. 我是電腦笨蛋.. 您能步一步仔細說明教我嗎?

1. 硬碟實有的空間是 100 GB.. 所需壓縮的卻只是 360 MB..

所以肯定有足夠的空間


目前只是不清楚我目前的虛擬記憶體的設定值是多少?

與該如何調整? 請您與會這方面的熱心人士們幫幫忙