詳細報道可以參見
http://www.pcpchina.com/news/list.asp?id=3650
http://www.pcpchina.com/forum/forum_...686&PN=1&TPN=1
正在上傳FTP1中...
不過那叫一個慢字了得!現在我的電腦 P4 2.7 + 512 RAM 都很慢!請要玩的朋友注意有心理承受能力!!!
請注意修改configfile裡面的,把原來的
redraw_interval_msec = 1
改成
redraw_interval_msec = 500
並且可以修改
ppc_start_resolution = 7 選項啟動1024解析度...
軟體說明
http://www.pcpchina.com/forum/forum_...686&PN=1&TPN=1
下載地址
http://www.pcpchina.com/forum/upload...0515040344.rar
用網路卡
# Network (unavailable on windows)
#
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
下面是有人對配置文件做的一個小說明
引用:
# PearPC Configuration File
#
# Resolution
#
# 0: 640x480x8 (indexed)
# 1: 640x480x15
# 2: 640x480x32
# 3: 800x600x8 (indexed)
# 4: 800x600x15
# 5: 800x600x32
# 6: 1024x768x8 (indexed)
# 7: 1024x768x15
# 8: 1024x768x32
#
# The indexed modes are unsupported.
#
# default: 4
ppc_start_resolution = 4
#
# Redraw interval (in ms)
# must be between 1 and 999
#
# If you set this higher, PearPC will spend less time doing redraws (and so run faster)
# but feel less responsive. You should adjust this to your computer speed and personal
# preference.
#
redraw_interval_msec = 800
#
# Loader
#
#
# Boot method
# this can be
# 1. "auto", prom will boot the first bootable partition found (default)
# 2. "select", prom will show you a list of bootable partitions
# 3. "force", prom will load and boot the local file prom_loadfile
#
prom_bootmethod = "select"
# Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
#
# bootargs: don't change unless you know what you are doing
# machargs: set to "-v" to get a verbose startup
#
#prom_env_bootargs = ""
prom_env_machargs = "-v"
#
# This is needed if you want to boot Mac OS X
#
prom_driver_graphic = "D:\ppc\video.x"
#這個要改絕對路徑
# This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
#
# CPU Config
#
# Processor Version Register
# Defaults to 0x00088302
# Only change if you know want you are doing
#
#cpu_pvr = 0x00088302
#
# Main memory (default 128 MiB)
# must be >= 64 MiB
#
#memory_size=0x10000000
#
# IO Devices
#
#
# PCI IDE Config
#
# Drive type will be set according to file extension:
# .img: Harddisk (filesize must be multiple of 516096)
# .iso: CD-Rom
# Or you can override this by specifying the type via
# pci_ide0_master_type / pci_ide0_slave_type
pci_ide0_master_installed = 1
pci_ide0_master_image = "D:\ppc\mac.img"
#這個也要改絕對路徑
#pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
#1啟用光碟,如果你想體驗自己安裝的話。可以再啟動後啟動選項你選1就是了
#pci_ide0_slave_image = "c:\test.iso"
pci_ide0_slave_image = "D:\panther1.iso"
#絕對路徑,安裝MAC OS X的iso文件
#pci_ide0_slave_image = "/dev/cdrom"
pci_ide0_slave_type = "cdrom"
#
# Network (unavailable on windows)
#
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
#
# USB
#
pci_usb_installed = 1
#
# NVRAM
#
nvram_file = "nvram"
--------------------------------------------------------------------------------
基本的按鍵。
win=option(ALT)
alt=mac
ctrl+滑鼠左鍵=蘋果的右鍵
ALT+W=關閉當前視窗
重點的三個參數:
ppc_start_resolution = 4
redraw_interval_msec = 1
#memory_size=0x10000000
推薦更改為
ppc_start_resolution = 7
redraw_interval_msec = 10
memory_size=0x10000000
以下是Aitken和Jack的對配置文件的中文翻譯和個人註解!如有錯誤,歡迎指正!
先說明:
1:#號是註解!不參與程序的編譯!要啟用某一句參數,可以把#號刪除!
2:有些句子=號後面有0或1 ,0代表遮閉、1代表啟動。
# PearPC Configuration File
PearPC 配置文件
#
# Resolution
解析度
#
# 0: 640x480x8 (indexed)
# 1: 640x480x15
# 2: 640x480x32
# 3: 800x600x8 (indexed)
# 4: 800x600x15
# 5: 800x600x32
# 6: 1024x768x8 (indexed)
# 7: 1024x768x15
# 8: 1024x768x32
#
# The indexed modes are unsupported.
標注為indexed模式是不支持的
#
# default: 4
預設:4
ppc_start_resolution = 4
ppc啟動解析度 = 4
#
# Redraw interval (in ms)
重新整理間隔(服務機構是ms)
# must be between 1 and 999
必須是在1到999之間
#
# If you set this higher, PearPC will spend less time doing redraws (and so
run faster)
# but feel less responsive. You should adjust this to your computer speed
and personal
# preference.
假如你比這個設定還要高,PearPC會用更少的時間重新整理(所以會執行的更快)但是會感
覺到反應很慢。
# 你應該根據自己電腦的速度調節出一個合適自己的參數
個人建議:你可以在安裝的時候調節高一些,以便更快的完成安裝
裝完之後把它再調節低點!這樣你的滑鼠靈敏度就有不少的增強!
redraw_interval_msec = 200
重新整理間隔=200
#
# Loader
裝載
#
#
# Boot method
啟動方法
# this can be
這部分可以選項
# 1. "auto", prom will boot the first bootable partition found (default)
1.「自動」,程序會啟動第一個被找到的並且可以啟動的分區(預設)
# 2. "select", prom will show you a list of bootable partitions
2.「選項」,程序會顯示出一個包含有啟動分區的列表以供選項
# 3. "force", prom will load and boot the local file prom_loadfile
3.「強制」,程序會強制裝載並啟動本機磁牒上的文件 如:prom_loadfile
#
prom_bootmethod = "auto"
程序……啟動方法 =「自動」
# Example of how to use "force":
舉例怎樣使用「強制」:
#prom_bootmethod = "force"
程序……啟動方法 =「強制」
#prom_loadfile = "test/yaboot"
程序……裝載文件 =「test/yaboot」
#prom_env_bootpath = "disk"
程序啟動路徑 =「disk」
#
# bootargs: don't change unless you know what you are doing
bootargs設定:在你不知情的狀況下不要更改
# machargs: set to "-v" to get a verbose startup
machargs設定:設定參數「-v」時顯示交互式啟動
#
#prom_env_bootargs = ""
程序bootargs = ""
prom_env_machargs = "-v"
程序machargs = 「-v」
#
# This is needed if you want to boot Mac OS X
假如你想要啟動Mac OS X的話這部分是必要的
#
prom_driver_graphic = "video.x"
程序……驅動……圖形圖像 =「video.x」
# This will adjust the position of the initial page table (don't change)
這個必須放置在最初的分區表中(不要更改)
#page_table_pa = 104857600
分區表 = 104857600
#
# CPU Config
CPU 配置
#
# Processor Version Register
處理器版本註冊
# Defaults to 0x00088302
預設0x00088302
# Only change if you know want you are doing
當你知道怎麼做時才可以更改
#
#cpu_pvr = 0x00088302
cpu參數 = 0x00088302
#
# Main memory (default 128 MiB)
主記憶體 (預設 128MB)
# must be >= 64 MiB
必須大於等於64MB
#
#memory_size=0x8000000
記憶體……容量=0x8000000
記憶體容量的改變要考慮實體記憶體的容量!
256MB=memory_size=0x10000000
384MB=memory_size=0x18000000
512MB=memory_size=0x200000000
其實用計算器把十進制轉換成十六進制即可
#
# IO Devices
輸入輸出設備
#
#
# PCI IDE Config
PCI IDE 設定
#
# Drive type will be set according to file extension:
驅動器類型設定必須依照以下文件擴展格式
# .img: Harddisk (filesize must be multiple of 516096)
.img:硬碟(文件尺寸必須大於516096)
# .iso: CD-Rom
.iso:CD光碟
# Or you can override this by specifying the type via
或者你可以不顧及這個指定的類型
# pci_ide0_master_type / pci_ide0_slave_type
pci_ide0_master_installed = 0
這裡設定成1以啟用它
pci_ide0_master_image = "test/imgs/linux.img"
這裡是你下載的pearpc-3gib.img.bz2解壓出來的鏡像你可以重新命名並輸入路徑,在
PPC同個目錄下,就可以不用輸入路徑
可以把他理解成一個剛買來硬碟,不過就是少了點!如果嫌少的化,官方網站上面還有
6G的!
#pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
#pci_ide0_slave_image = "c:\test.iso"
pci_ide0_slave_image = "/home/sepp/prog/pearpc.res/test/isos/MandrakeLinux-
9.1-CD1.ppc.iso"
這裡輸入Mac OS X Panther的第一張安裝鏡像的路徑!在PPC同個目錄下,就可以不用
輸入路徑
#pci_ide0_slave_image = "/dev/cdrom"
pci_ide0_slave_type = "cdrom"
#
# Network (unavailable on windows)
網路(在Windows下不可用)
#
pci_3c90x_installed = 0
這裡設定成1以啟用它
pci_3c90x_mac = "de:ad:ca:fe:12:34"
這裡設定網路卡的物理位址 = 「de:ad:ca:fe:12:34」
#
# USB
#
pci_usb_installed = 1
#
# NVRAM
#
nvram_file = "nvram"
XP2500+慢的跟蝸牛似的。不過還能接受,有種486跑XP的感受
還算說的過去吧,僅僅就是體驗一下。
Macosx的人性化還是蠻好的。
還有它的字體真是舒服級了,比起WINDOWS不知道強了多少倍。
這個東東還真強。雖然是百分之百使用CPU。跳出來這邊在執行WINDOWS還很流暢!
最好有1G的記憶體來使用它。
雖然不可能達到真實的速度,但是能通過模擬看一下真實的MAC執行也還是一件很美妙的事情。