SPECWeb 99 ???
 

請問有人安裝過 SPECWeb 99 這套軟體嬤？
請問要如何安裝哩？安裝時，注意事項為何？
請各位大大幫幫忙，謝謝。

目前執行後出現以下的問題，請問是否是Cadgen99與Upfgen99未解開，但這兩個Utilities要如何解開哩？而且Path 要放置在哪？
請各位大大幫幫忙，謝謝。

Validating all paths for rc

Checking Reset command with 'http://server1/cgi-bin/specweb99-cgi.pl?command/Reset&maxload=10&pttime=100&maxthread=100&exp=1,100&urlroot=http://server1'
**ERROR**: Can't fetch file http://server1/cgi-bin/specweb99-cgi...http://server1 with a Reset command request
Is DYNAMIC_ROOT (or DYN_xxx_SCRIPT) configured correctly?
Error: 404 Not Found

Checking static GET with 'http://server1/file_set/dir00030/class3_3'
**ERROR**:Can't fetch file http://server1/file_set/dir00030/class3_3 with a static GET request
Did WAFGEN generate a large enough fileset?
Error: 404 Not Found

Checking dynamic GET with 'http://server1/cgi-bin/specweb99-cgi.pl?/file_set/dir00030/class1_3'
**ERROR**: Can't fetch file http://server1/cgi-bin/specweb99-cgi...00030/class1_3 with a dynamic GET request
Is DYNAMIC_ROOT (or DYN_xxx_SCRIPT) configured correctly?
Error: 404 Not Found

Checking dynamic CGI GET with 'http://server1/cgi-bin/specweb99-cgi.pl?/file_set/dir00030/class1_3'
**ERROR**: Can't fetch file http://server1/cgi-bin/specweb99-cgi...00030/class1_3 with a dynamic CGI GET request
Is DYNAMIC_ROOT (or DYN_xxx_SCRIPT) configured correctly?
Error: 404 Not Found

Checking dynamic custom ad (CAD) GET with 'http://server1/cgi-bin/specweb99-cgi.pl?/file_set/dir00030/class1_3'
**ERROR**: Can't fetch file http://server1/cgi-bin/specweb99-cgi...00030/class1_3 with a dynamic custom ad (CAD) GET request
Is DYNAMIC_ROOT (or DYN_xxx_SCRIPT) configured correctly?
Error: 404 Not Found
**ERROR**: Can't open dyncadget.out fetched from dynamic CAD GET of No such file or directory
NOTE: errors in Custom Ad Rotation may be caused by problems in
command/Reset. Check that upfgen and cadgen get run correctly

Checking dynamic POST with 'http://server1/cgi-bin/specweb99-cgi.pl?/file_set/dir00030/class1_3'
**ERROR**: Can't fetch file http://server1/cgi-bin/specweb99-cgi...00030/class1_3 with a dynamic POST request
Is DYNAMIC_ROOT (or DYN_xxx_SCRIPT) configured correctly?
Error: 405 Method Not Allowed

我們這兒真的沒有人瞭解這一套軟體嬤？
那是否有人可告知，哪兒可以詢問及排除相關的問題哩？