史萊姆論壇 - 只能燒到4%......

各位大大幫幫忙，我是用notebook上的combo光碟機燒東西的
可是最近光碟機要燒東西的時候都一直有kikikaka的怪聲音出現，
然後有的時候可以燒有的時候又不能燒:(
不知道是片子的問題還是怎樣，
我是用nero6燒的用酒精燒也是不行，
是燒錄機挑片嗎？　還是真的我的燒錄機壞了？　（千萬不要啊~~)
附上nero的錯誤訊息，希望各位看得懂的大大們幫幫忙解釋一下

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 下午 07:18:06
Nero版本: 6.3.1.6 (Nero Express)
燒錄器： <QSI CDRW/DVD SBW-242> 版本: UX13 - HA 1 TA 0 - 6.3.1.6
界面卡驅動程式： <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >版本: 2.2a - HA 2 TA 0 - 6.3.1.6
界面卡驅動程式： <sojuscsi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-242 G: CDRom0
AXV CD/DVD-ROM H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 74MB (75956kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.5.2004
光碟映像檔
下午 03:02:51 #1 Phase 89 File dlgbrnst.cpp, Line 1841
啟動Super Link

下午 03:02:52 #2 Text 0 File Reader.cpp, Line 118
Reader running

下午 03:02:52 #3 Text 0 File Writer.cpp, Line 124
Writer QSI CDRW/DVD SBW-242 running

下午 03:02:52 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 655556608
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=71:05.71 ( 319946)
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <E:\hwp2002.nrg>

下午 03:02:52 #5 Text 0 File Burncd.cpp, Line 3198
Turn on 光碟一次燒錄(DAO), using CD-R/RW media

下午 03:02:52 #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 319945 ( 71:07.70)

下午 03:02:52 #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

下午 03:02:52 #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: QSI CDRW/DVD SBW-242;
CDR code: 00 97 27 19; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 13 (LI 97:27.19), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

下午 03:02:52 #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 03:02:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM模式1, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 319946 (319946) = #319946/71:5.71
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 319946 blocks [QSI CDRW/DVD SBW-242]
--------------------------------------------------------------

下午 03:02:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [QSI CDRW/DVD SBW-242] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 655556608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
319946 | lead-out | 1 | 0x00 | 0x41

下午 03:02:52 #12 Phase 24 File dlgbrnst.cpp, Line 1841
檔案暫存作業開始

下午 03:02:52 #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

下午 03:02:52 #14 Phase 25 File dlgbrnst.cpp, Line 1841
檔案暫存作業完成

下午 03:02:52 #15 Phase 36 File dlgbrnst.cpp, Line 1841
以16x (2,400 KB/s)的速度開始燒錄

下午 03:02:52 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

下午 03:02:52 #17 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

下午 03:02:52 #18 Text 0 File Mmc.cpp, Line 19864
Set BUFE: Super Link -> ON

下午 03:02:52 #19 Text 0 File Mmc.cpp, Line 15555
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 47 07 47

下午 03:04:22 #20 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07A80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
下午 03:04:22 #21 CDR -1135 File Writer.cpp, Line 304
寫錯誤

下午 03:04:22 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 03:04:22 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

下午 03:04:35 #24 Phase 38 File dlgbrnst.cpp, Line 1841
以16x (2,400 KB/s)的速度燒錄失敗

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002/9/13 下午 08:00:00 (Adapter driver for rec)
File 'Drivers\sojuscsi.sys': Ver=3.41.0.0 built by: WinDDK, size=5504 bytes, created 2003/9/28 上午 10:57:52 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

好像太長了~~@@
可是我看不懂那一段才是重點，麻煩各位大大了~~

ps: 現在有870m的空白cd了嗎??
我買了50片片子上寫850m的空片可是電腦裡怎麼看都只有703m :sxde45fty :sxde45fty