史萊姆論壇 - 我使用VMWare 安裝Fedora Core 2卻近不了圖形介面

史萊姆論壇 (http://forum.slime.com.tw/)

- 網路疑難應用技術研討區 (http://forum.slime.com.tw/f47.html)

- - 我使用VMWare 安裝Fedora Core 2卻近不了圖形介面 (http://forum.slime.com.tw/thread116331.html)

我使用VMWare 安裝Fedora Core 2卻近不了圖形介面

各位大大
小弟安裝了Fedora Core 2
我按照大大所貼的安裝教學安裝
安裝完畢後卻都近不了圖形介面
都只停留在文字介面
該怎摸辦呢
請大大幫幫我吧
謝謝

我也是:56gtyhu:
應該是顯示卡驅動程式抓不到吧...

:drtyt76h6 :drtyt76h6 :drtyt76h6

呵呵，這是VM的問題啦，
開始安裝的時候，請下參數："linux vdso=0"
就可以解決了。

試喔
等等馬上來試試看

我這兩天有遇過連安裝rehat時圖形介面出不來,後來用VM4.5的版本就可以!!

引用:

原文由 wisley 所發表
呵呵，這是VM的問題啦，
開始安裝的時候，請下參數："linux vdso=0"
就可以解決了。

我還是不行???
是在光碟開機後的安裝畫面嗎(boot)?

<:56gtyhu: :56gtyhu: :56gtyhu: >

是的是的，boot：linux vdso=0 按Enter即可。^^
下面是原文解說：
After a bit of tweaking this evening, I got Fedora Core 2 Test 3 running under VMware 4.5.1. Here's how.

★Host Configuration:
Toshiba Satellite Laptop
512MB RAM
40GB Internal HD
Windows XP Pro SP1 with all updates
VMware 4.5.1

★Guest VM Configuration:
Fedora Core 2 Test 3 (downloaded .iso files)
"Other Linux 2.6.x Kernel"
256MB RAM
4GB HD (/dev/sda1 = /boot, /dev/sda2 = /)
1GB HD (/dev/sdb1 = <swap>)
Installation

1.Boot installation CD.
2.At boot: prompt, type "linux vdso=0". This is very important, otherwise VMware will crash.
3.Install as usual, configure however you like. You'll need to ensure "vdso=0" is set in the "advanced boot configuration" options.
4.If you just reboot at the end of the install, the system will "freak out" a bit trying to start the x server. You can avoid this by editing the boot line (at the Fedora grub splash screen) and appending a 3 to the line.
5.Boot.
6.Unpack the VMware Tools tarball, then apply the patch below (vmware-fc2t3.patch) to vmwares-tools-distrib/bin/vmware-config-tools.pl.
7.Install VMware tools. Use the defaults for all questions, except say NO when asked if you want to compile a vmhgfs module. It doesn't seem compile with the 2.6 kernel headers.
8.Reboot, and enjoy.

Notes:

1.Thanks to Daniel Arial at VMware for the "vdso=0" tip. I would have never found this on my own!
2.Don't take this patch or these instructions too seriously. I just came up this this while hacking around tonight. All of the usual disclaimers apply. Your mileage may vary. I am not responsible for data loss, unusual hair growth, or any other rude behavior exhibited by your computer. You have been warned.
3.In my experience, Fedora Core 2 Test 3 is extremely slow under VMware 4.5.1 (much slower than FC1). It takes about 11 minutes (!!) from the grub splash screen to the GUI login prompt. This is probably in large part due to the eleventy-bazillion services installed by default.
4.I've noticed some bizarre problems with initialzing the guest keyboard and mouse. Apparently, if the VMware VM doesn't have focus while the guest OS is booting, there is a non-zero chance the keyboard will not initialize correctly. Or, the failure could just be completely random; I don't know yet. FWIW, I've never seen this with other guest OS's, only FC2T3.

轉自：http://kerneltrap.org/node/view/3097

引用:

原文由 wisley 所發表
呵呵，這是VM的問題啦，
開始安裝的時候，請下參數："linux vdso=0"
就可以解決了。

我用了
但還是不行說
真是不知道該怎摸辦
好想用喔
我VM是用4.5.2版的

哈...
即使安裝Core 1也出問題
小弟大概只適合用Mandrake Linux吧(至少有成功過)

<:56gtyhu: :56gtyhu: :56gtyhu: >

可是我跟同學怎麼裝都成功耶....
傷腦筋，還是有人可以提供....2-3G的空間...
我把IMG檔放給你們抓？

引用:

原文由 wisley 所發表
可是我跟同學怎麼裝都成功耶....
傷腦筋，還是有人可以提供....2-3G的空間...
我把IMG檔放給你們抓？

還是大大
你把你用的VM程式分享一下
我裝你的版本看看
我的FC2是DVD版的
我是用液晶螢幕的

我VM也是在版上抓的，跟各位的並無不同。
我也是用DVD裝+21"LCD ＠＠a
所以應該是可以吧！

我也有照著教學裝~
但就是進步去圖形介面
真慘