酒精Alcohol 120%安裝時一直重開機?!
 

請問各位大大~
小弟最近幫友人的新電腦安裝酒精Alcohol 120%時，安裝到SPTD重開機時，就進不了OS了...:decfghi6: (OS剛灌好，進行第一次安裝)
電腦會一直無限重開機，好不容易進入安全模式把酒精刪除後，再安裝就又可以了?!:drtyt76h6
後來小弟覺得怪怪的，於是再重灌OS一次後再安裝酒精，結果還是發生一樣的問題~:decfghi6: :decfghi6:
只要一到要灌SPTD重開機後就一直無限重開機，進不了OS系統~>"<
然後再一次進入安全模式把酒精刪除後，再安裝就又可以了@@"

請問大大，這樣的情況是什麼原因呢?是跟驅動程式起衝突嗎?小弟有爬了文，還是沒找到解決方案
小弟安裝酒精Alcohol 120%版本有3823(第二次OS安裝)、4212(第一次OS安裝)其情況皆是如此!
小弟是裝完XP SP2後，安裝主機板Driver再進行Update到7月後，就灌酒精Alcohol 120%了

小弟灌到已經有點怕了~麻煩各位大大了!!謝謝~:ddrf567h:

小弟友人的新電腦配備:↓
CPU: Intel Pentium D 930
MB: ASUS P5PL2
VGA: ELSA NVIDIA GeForce 7600GS
RAM: KINGBOX DDR2 533 512MBX2
HD: Seagate 7200.9 200GB SATAII
ROM/Writer: Panasonic SW-9585-C X2
POWER: 七盟420瓦
OS: Windows XP with SP2

xp用正板的嗎,還是用

偶猜喔
1.Updated SPTD driver (Ver 1.25)
Description:
NEW VERSION 1.25 CHANGELOG:

Microsoft Patch KB 914784 - FIXED
McAfee incompatibilities - FIXED
Several glitches and issues some users reported - FIXED

http://85.17.36.30/SPDT/SPTDinst-v125-x86.rar

http://85.17.36.30/SPDT/SPTDinst-v125-x64.rar

2.或是移除KB914784,再安裝酒精
C:\WINDOWS\$NtUninstallKB914784$\spuninst

3.或是先不要裝,裝別種的

4.或是先不要更新xp

小弟是用正版的XP安裝，不過小弟安裝酒精都是再Windows Update到最新7月後才進行安裝!
如果照大大所說的，那小弟試試看不要先Wuindows Update看看~
先謝謝大大囉!!:ddrf567h:
:bj375mg:

終於把虛擬光碟給裝上了！
系統裝好將近半年了，用起來一直很好，但有個毛病：虛擬光碟（daemon）一直裝不上。安裝是不是提示"failed to config key"就是"system file error"。今天終於到網上找了解決的方法。

具體如下：

After "System file error" message I go to Device manager,
select View - Show hidden devices. Then i select "No PnP
device drivers" item and dubleclick on SPTD. In the Driver
folder I change Autostart type to System. Restart computer
and successfully install DT4.

也就是說到「裝置管理員」裡選項「檢視」，顯示"隱藏設備"，然後選項「非即插即用設備」雙按「sptd」，把裡面的「自動」改為「系統」，然後重新啟動安裝daemon tools.我裝的是4.03

還有有一些處理方法，沒用過，轉貼如下：

Maybe you could try this:
When testing Daemon Tools with Vista (it doesn't work), I discovered that a key created by sptdinst has incorrect permissions, I don't know if it is related, just give a try and give your feedback.

The key is the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\sptd\Cfg

To apply correct permissions on it, you should:
1. run regedit
2. goto the key
3. right mouse button -> permissions on th Cfg key
4. "advanced" button
5. I've got only one permission entry for administrator. Delete it
6. Check inherit from parent ... and replace permissions entries on all child objects ...

－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

Step 1. Download SPTDinst_x86.exe from here. Save to your C:\ drive for easy access.
Step 2. Restart computer in safe mode but DO NOT hit esc when windows says sptd.sys is loading.
Step 3. When safe mode starts, go into Start menu, click Run... and type "C:\sptdinst_x86.exe remove" without the quotes.
Alternate Step 3. Start windows safe mode with a command prompt. At the prompt type "C:\sptdinst_x86.exe remove" without the quotes.
Step 4. Restart your computer to boot windows normally.
Step 5. Run Daemon Tools 4.03 Installation program.
Step 6. When it asks you to restart your computer, do so, but do not enter into safe mode. Just restart normally.
Step 7. Run installation program again and it should work!

There is NO need to fiddle with the registry or to delete any sptd files from your WINDOWS/system32. This solution worked for me and I hope it works for many of you. I tried to make it as clear as possible. Good luck to everyone!

謝謝大大提供此方法!小弟試過可以安裝Daemon Tool 4.03 with SPTD 1.25~:ddrf567h: