史萊姆論壇 - 燒錄ㄉ問題...請大大幫幫忙

我沒辦法燒光碟ㄌ...他說無法製作映像檔

資料光碟(ISO)
12.3.2003

下午 10:49:36 #1 Text 0 File Isodoc.cpp, Line 6002
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

下午 10:49:36 #2 Phase 75 File dlgbrnst.cpp, Line 1560
JustLink activated

下午 10:49:36 #3 Text 0 File Reader.cpp, Line 118
Reader running

下午 10:49:36 #4 Text 0 File Writer.cpp, Line 129
Writer RICOH CD-R/RW MP7240A running

下午 10:49:36 #5 Text 0 File Burncd.cpp, Line 3474
Turn on Track-At-Once, using CD-R/RW media

下午 10:49:36 #6 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)

下午 10:49:36 #7 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 124955 (124955) = #124955/27:46.5
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

下午 10:49:38 #8 Text 0 File DlgWaitCD.cpp, Line 198
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 124954 (27:48.04)

下午 10:49:38 #9 Text 0 File DlgWaitCD.cpp, Line 1393
Recorder: RICOH CD-R/RW MP7240A;
CDR code: 00 97 18 06; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 12 06 (LI 97:18.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

下午 10:49:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 835
Prepare recorder RICOH CD-R/RW MP7240A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 256215040

下午 10:49:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 1.

下午 10:49:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 124955 (124955) = #124955/27:46.5
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 124953 blocks [RICOH CD-R/RW MP7240A ]
--------------------------------------------------------------

下午 10:49:40 #13 Phase 24 File dlgbrnst.cpp, Line 1560
Caching of files started

下午 10:49:40 #14 Phase 25 File dlgbrnst.cpp, Line 1560
Caching of files completed

下午 10:49:40 #15 Phase 36 File dlgbrnst.cpp, Line 1560
Burn process started at 12x (1,800 KB/s)

下午 10:49:40 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1967
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

下午 10:49:40 #17 Text 0 File Mmc.cpp, Line 16205
Set BUFE: JustLink -> ON , JustSpeed : ON

下午 10:49:50 #18 SCSI -1152 File Cdrdrv.cpp, Line 1406
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x024F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

下午 10:49:50 #19 MMC -1152 File Writer.cpp, Line 330
Medium speed error

下午 10:49:50 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

下午 10:49:50 #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

下午 10:49:50 #22 CDR -201 File WriterStatus.cpp, Line 187
Invalid writestate

下午 10:49:50 #23 TRANSFER -18 File WriterStatus.cpp, Line 187
Could not perform EndTrack

下午 10:49:50 #24 SCSI -1176 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04

下午 10:49:50 #25 MMC -1176 File WriterStatus.cpp, Line 226
Session fixation error

下午 10:49:50 #26 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation

下午 10:49:50 #27 Text 0 File WriterStatus.cpp, Line 235
falling back to disc fixation

下午 10:49:50 #28 SCSI -1176 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04

下午 10:49:50 #29 MMC -1176 File WriterStatus.cpp, Line 226
Session fixation error

下午 10:49:50 #30 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation

下午 10:49:50 #31 Phase 38 File dlgbrnst.cpp, Line 1560
Burn process failed at 12x (1,800 KB/s)

下午 10:49:50 #32 Text 0 File Scsicmd.cpp, Line 383
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 2002/5/6 上午 11:01:08

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)