最近燒出來的片子，都有好幾圈，而且是一直間隔，這是怎麼了?
 

燒錄機：Benq DW1640
韌體：BSRB
這一個禮拜才發生的，且燒出來的電影都斷斷續續的，我想應該是出現那個一圈一圈的問題，這是代表我的燒錄機掛了嗎?:on_51:

韌體更新至現在的版本後，再用Nero，它就乾脆出現error，不讓我繼續燒，我是有存下log，不知哪位高手可以幫忙解讀一下。:on_52:

T-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0

Recorder: <BENQ DVD DD DW1640> Version: BSRB - HA 1 TA 4 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ASUS DVD-E616P2 >Version: 1.08 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DVD-E616P2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ExcelStor Technology ES3220 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-22JHA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1640 F: CDRom4
ASUS DVD-E616P2 G: CDRom0
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 318MB (325680kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.5.2008
燒錄DVD映像檔
上午 12:13:30 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

上午 12:13:30 #2 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

上午 12:13:31 #3 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2294021 (509:46.71, 4480MB)

上午 12:13:31 #4 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD DVD)

上午 12:13:31 #5 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: BENQ DVD DD DW1640, Media type: DVD+R

上午 12:13:31 #6 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

上午 12:13:31 #7 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM模式1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2294022 (2294022) = #2294022/509:46.72
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293872 blocks [F: BENQ DVD DD DW1640]
--------------------------------------------------------------

上午 12:13:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: BENQ DVD DD DW1640] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698157056, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2294022 | 2293872 | 0x00
0 | 1 | 1 | 0x41 | 2294022 | 2293872 | 0x00
2294022 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

上午 12:13:31 #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

上午 12:13:31 #10 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

上午 12:13:31 #11 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

上午 12:13:31 #12 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

上午 12:13:31 #13 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11,080 KB/s)

上午 12:13:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

上午 12:13:31 #15 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x06460200: Len x804

上午 12:13:31 #16 CDR -1207 File DVDR.cpp, Line 6174
Book Type automatically set to: 目前燒錄器設定

上午 12:13:31 #17 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

上午 12:14:39 #18 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
Buffer x22040040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

上午 12:14:39 #19 CDR -1176 File Writer.cpp, Line 299
Session fixation error
F: BENQ DVD DD DW1640

上午 12:14:40 #20 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

上午 12:14:40 #21 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders

上午 12:14:45 #22 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
F: BENQ DVD DD DW1640

上午 12:14:48 #23 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

上午 12:14:50 #24 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 8x (11,080 KB/s)

上午 12:14:52 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

上午 12:14:55 #26 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

上午 12:14:55 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 2002/8/14 下午 03:03:36
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005/3/12 上午 06:28:14 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

1.燒DVD片還是CD?

2.燒什麼資料?用什麼模式?用多少速度燒?

3.一圈一圈請自行判斷"間隔"處是不是呈現"沒燒錄"的狀態

1.燒DVD片還是CD?
DVD片
2.燒什麼資料?用什麼模式?用多少速度燒?
複製電影，用4倍、8倍都一樣有問題，用NERO，都是固定"光碟一次燒錄DAO"
3.一圈一圈請自行判斷"間隔"處是不是呈現"沒燒錄"的狀態
看起來像是，而且燒錄時，會有吱吱叫的雜音，看片時，會斷斷續續的

煩請大大幫我診斷，是不是燒錄機掛了?

我覺得是DVD燒錄片的關係

你是用那一個牌子在燒錄的啊(選擇好一點的燒錄片)

通常　我也是用爛的片子燒錄就會出現聲音

然後就「飛碟」出現了

再者　燒錄時　我都會先重新開機　啥都不開就只有開燒錄而已

讓電腦專注於燒錄　片子的話　我會買八倍的燒錄片（早期買的燒錄機雖有16倍功能）

去燒錄　這樣子的話　我個人失敗的機會就超少發生了

剛才試燒CD片，居然也失敗了，也不能抹除RW片，變成只能讀的光碟機
至於DVD片，燒了只剩十幾片，之前都成功，這禮拜才開始出現"飛碟"
這算燒錄機壽終正寢了嗎?
燒錄機大部份都是哪裡壞掉?壽命只有2年嗎?

連CD也不能燒應該凶多吉少了.....燒錄器壽命幾年不一定，看你怎樣用。
不過它已經很廉價了而且本身就是消耗品......

死馬當活馬醫....換作是我我會檢查排線、電源有無接妥...甚至拆開機器清理灰塵

一般燒到有一圈一圈的

可能有的原因：
就是燒的過程有不穩，有可能是資料來源讀取不穩
也就是使用了防燒壞技術，當你用8x來燒時，因資料來源來不及提供資料
會先停止寫入，等讀取buff有資料才繼續燒入cd，所以才有斷層的問題

解決：
你可測試燒硬碟裡的資料試試
比較不會有讀取來源來不及的問題

或
降低燒錄的速度，DVD以1X或2X測試燒，CD以16X去試試

或
把燒錄器移到別的系統下燒錄測試，或許是系統在忙背景程式，而使燒錄程式無法回應

如果以上都試過不行，那就真的壞掉了

我拆了機器，沒看到什麼東西壞掉，又再裝回去
試燒一片，居然又活起來，就在高興以為自己修好了
原來只是回光返照，接連又掛了三片
今天跑去買新的燒錄機，Lite on DH-20
目前操機中，感謝版上各位大大的解答。