該怎樣新裝一顆硬碟?
 

各位大哥
小弟想新裝一顆硬碟
Maxtor 的 DiamondMax Plus 45 7200 RPM
想把它設為次要的
是不是slave
但我不知該怎麼調整硬碟上的那2個小插銷
可否教教小弟
感激不盡

看硬碟上面就有了
仔細睜大眼睛找一下
ㄒㄒ.....

Re: 該怎樣新裝一顆硬碟?
 

次要的就是SLAVE...小插銷(JUMP)的插法..就看硬碟上面的指示來插..插錯應該是抓不到...或無法開機而已..

還有...妳的排線是80條的那一種..SLAVE就是離主機板最遠的那個接頭...

每個牌子不同.JUMP位置也不同.硬碟上面都有標示
Maxtor如果是slave把jump的針拉出來就好了.素素看
看不董硬碟標示就用上述的方法.

各位大大
這顆硬碟是舊的
小弟找遍了仍是找不到圖示(可能淡化了)
不過仍是感謝各位

你目前位置是啥...反正就三種模式可以試試看

... .
.....
上面幾點是它的位置我分別用123 5
67890
來說明:
目前是1跟6套一起
2跟3套一起
這樣應該不是
因為一開始一顆的時候就是這樣用
請指教

烏白插直到抓得到硬碟不就得了！放心！硬碟不會爆炸的，它不是美伊戰場上的手榴彈。

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.

(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.

(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.

(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
http://www.maxtor.com/en/support/pro..._100/index.htm
應該是這顆吧..7200RPM..U/100

感謝
只是為何小弟硬碟上的是2個插銷
而圖上是1個
恕小弟駑鈍

你目前兩個JUMPER位置在哪?一般來說只設定如上圖上面那一排的設定而已..
下面那一排我就不太懂它的定義了..