史萊姆論壇

史萊姆論壇 (http://forum.slime.com.tw/)
-   一般電腦疑難討論區 (http://forum.slime.com.tw/f17.html)
-   -   燒VCD完後...的問題 (http://forum.slime.com.tw/thread91883.html)

s751025 2004-01-20 08:50 PM
燒VCD完後...的問題
 
我用NERO燒完後....就會出現錯誤(25 CDR -1194 File Writer.cpp, Line 301更新 PMA 失敗)...但還是能正常看...這是什麼原因阿

____________________________________________________


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/11/11 下午 02:49:52
Nero版本: 6.3.0.0 (Nero Express)
燒錄器： <SONY CD-RW CRX175A1> 版本: 5YS2 - HA 1 TA 1 - 6.3.0.0
界面卡驅動程式： <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS DVD-ROM E616 >版本: Z.0 - HA 1 TA 0 - 6.3.0.0
界面卡驅動程式： <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-ROM E616 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX175A1 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
ASUS DVD-ROM E616 E: CDRom0
SONY CD-RW CRX175A1 F: CDRom1
AXV CD/DVD-ROM G: CDRom2
AXV CD/DVD-ROM H: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 198MB (202772kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.1.2004
複製光碟
下午 08:40:46 #1 Phase 96 File dlgbrnst.cpp, Line 1800
啟動防燒壞保護

下午 08:40:46 #2 Text 0 File Reader.cpp, Line 118
Reader running

下午 08:40:46 #3 Text 0 File Writer.cpp, Line 124
Writer SONY CD-RW CRX175A1 running

下午 08:40:46 #4 Phase 48 File dlgbrnst.cpp, Line 1800
分析光碟

下午 08:40:46 #5 CDCOPY -1 File CDCopy.cpp, Line 1896
這是有版權的光碟

下午 08:40:46 #6 Text 0 File CDCopy.cpp, Line 2116
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 373 372 ( 0:06.72)
Track 2: 373 523 ( 0:08.73) 1830 1829 ( 0:26.29)
Track 3: 1830 1980 ( 0:28.30) 4338 4337 ( 0:59.62)
Track 4: 4338 4488 ( 1:01.63) 336056 336055 ( 74:42.55)

下午 08:40:46 #7 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 523 = 523, data (TRM_DATA_RAW_MODE2, block size 2352)
02. 523 - 1980 = 1457, data (TRM_DATA_RAW_MODE2, block size 2352)
03. 1980 - 4488 = 2508, data (TRM_DATA_RAW_MODE2, block size 2352)
04. 4488 - 336056 = 331568, data (TRM_DATA_RAW_MODE2, block size 2352)

下午 08:40:46 #8 Text 0 File Burncd.cpp, Line 3094
Turn on 光碟一次燒錄(DAO), using CD-R/RW media

下午 08:40:50 #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 336055 (74:42.55)

下午 08:40:50 #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

下午 08:40:51 #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: SONY CD-RW CRX175A1;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

下午 08:40:51 #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 08:40:51 #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (1 - 資料(模式2))
2 indices, index0 (150) not provided
original disc pos #0 + 373 (373) = #373/0:4.73
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 373 blocks [SONY CD-RW CRX175A1 ]
1: TRM_DATA_MODE2_2336 (2 - 資料(模式2))
2 indices, index0 (150) not provided
original disc pos #523 + 1307 (1307) = #1830/0:24.30
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1307 blocks [SONY CD-RW CRX175A1 ]
2: TRM_DATA_MODE2_2336 (3 - 資料(模式2))
2 indices, index0 (150) not provided
original disc pos #1980 + 2358 (2358) = #4338/0:57.63
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 2358 blocks [SONY CD-RW CRX175A1 ]
3: TRM_DATA_MODE2_2336 (4 - 資料(模式2))
2 indices, index0 (150) not provided
original disc pos #4488 + 331568 (331568) = #336056/74:40.56
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 331568 blocks [SONY CD-RW CRX175A1 ]
--------------------------------------------------------------

下午 08:40:51 #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY CD-RW CRX175A1 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 4:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1230096, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1230096 1582896 4656960, ISRC ""
3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 4656960 5009760 10555776, ISRC ""
4: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 10555776 10908576 790756512, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
373 | 2 | 0 | 0x00 | 0x41
523 | 2 | 1 | 0x00 | 0x41
1830 | 3 | 0 | 0x00 | 0x41
1980 | 3 | 1 | 0x00 | 0x41
4338 | 4 | 0 | 0x00 | 0x41
4488 | 4 | 1 | 0x00 | 0x41
336056 | lead-out | 1 | 0x00 | 0x41

下午 08:40:51 #15 Phase 36 File dlgbrnst.cpp, Line 1800
以24x (3,600 KB/s)的速度開始燒錄

下午 08:40:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

下午 08:40:51 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 1 (relocatable, no disc pos, patch infos, orig at #523): write at #523

下午 08:40:51 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 2 (relocatable, no disc pos, patch infos, orig at #1980): write at #1980

下午 08:40:51 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 3 (relocatable, no disc pos, patch infos, orig at #4488): write at #4488

下午 08:40:52 #20 Text 0 File Mmc.cpp, Line 14803
StartDAO : CD-Text - Off

下午 08:40:52 #21 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Buffer under-run error protection -> ON

下午 08:40:53 #22 Text 0 File Mmc.cpp, Line 15090
CueData, Len=80
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 06 49
41 02 01 21 00 00 08 49
41 03 00 21 00 00 1a 1e
41 03 01 21 00 00 1c 1e
41 04 00 21 00 00 3b 3f
41 04 01 21 00 01 01 3f
41 aa 01 34 00 4a 2a 38

下午 08:45:07 #23 Text 0 File WriterStatus.cpp, Line 115
<SONY CD-RW CRX175A1 > start writing Lead-Out at LBA 336056 (520B8h), lenght 0 blocks

下午 08:45:36 #24 SCSI -1194 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04

下午 08:45:37 #25 CDR -1194 File Writer.cpp, Line 301
更新 PMA 失敗

下午 08:45:37 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 08:45:37 #27 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

下午 08:45:37 #28 Phase 38 File dlgbrnst.cpp, Line 1800
以24x (3,600 KB/s)的速度燒錄失敗


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002/8/29 上午 01:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

didi 2004-02-10 07:03 AM
1.cd內圈有PMA區( Program Memory Area )，裡面專門存放著光碟片的辨識資料
只是無法辨識

ps.而pma中有一組ATIP Code, 他記錄了CDR片的總長

龍之首競技場 2004-02-11 12:02 AM
引用:
原文由 didi 所發表
1.cd內圈有PMA區( Program Memory Area )，裡面專門存放著光碟片的辨識資料
只是無法辨識

ps.而pma中有一組ATIP Code, 他記錄了CDR片的總長
那麼ＰＭＡ主要的作用是存放光碟片的辨諩資料，這項功能有什麼好處，難道是那作用於"續接燒錄"時所讀取的區斷？

ＰＭＡ是指整片光碟的"實際"總長還是燒錄完之後的總長？


所有時間均為台北時間。現在的時間是 04:10 PM。

Powered by vBulletin® 版本 3.6.8
版權所有 ©2000 - 2025, Jelsoft Enterprises Ltd.

『服務條款』

* 有問題不知道該怎麼解決嗎？請聯絡本站的系統管理員 *


SEO by vBSEO 3.6.1