史萊姆論壇

返回   史萊姆論壇 > 教學文件資料庫 > 作業系統操作技術文件
忘記密碼?
論壇說明 標記討論區已讀

歡迎您來到『史萊姆論壇』 ^___^

您目前正以訪客的身份瀏覽本論壇,訪客所擁有的權限將受到限制,您可以瀏覽本論壇大部份的版區與文章,但您將無法參與任何討論或是使用私人訊息與其他會員交流。若您希望擁有完整的使用權限,請註冊成為我們的一份子,註冊的程序十分簡單、快速,而且最重要的是--註冊是完全免費的!

請點擊這裡:『註冊成為我們的一份子!』

Google 提供的廣告


 
 
主題工具 顯示模式
舊 2006-07-22, 12:22 AM   #1
psac
榮譽會員
 
psac 的頭像
榮譽勳章
UID - 3662
在線等級: 級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時
註冊日期: 2002-12-07
住址: 木柵市立動物園
文章: 17381
現金: 5253 金幣
資產: 33853 金幣
預設 系統 - 安裝Daemon Tool 4.03時出現如下提示:

為了更好的安裝,我先御載了以前的低版本,然後安裝Daemon Tool 4.03時出現如下提示:
This program will install SCSI Pass Through Direct (SPTD) layer on your computer. WARNING-SPTD is not compatible with kernel mode debuggers (SoftICE,WinDBG etc.)! Please cancel setup if you plan to use kernel debugger on this machine

為了安全,我選項了取消,程序因此結束安裝.接著我又在另一台電腦上試.
我在已安裝有Daemon Tool 4.00的電腦上安裝時出現如下錯誤:
安裝時出現如下提示:
This program will updatell SCSI Pass Through Direct (SPTD) layer on your computer. WARNING-SPTD is not compatible with kernel mode debuggers (SoftICE,WinDBG etc.)! Please cancel setup if you plan to use kernel debugger on this machine.

我不知道kernel debugger 是什麼。於是先上網查一查,這不查不知道,一查嚇一跳,原來這麼多人的都出了問題,可見這不是一個小問題.

我上了一下Daemon的官網論壇看了一下,類似此問題沒有很好的解決辦法。他們的討論有兩個方法:
1、在安全模式下安裝DaemonTool(如果有老版本則在安全模式下卸載之),此刻安裝SPTD順利的話則可以在啟動後轉入正常模式繼續安裝;
2、改用4.03版本來安裝
©HelpOnline在線技術支持 -- HelpOnline在線技術支持,免費為您解決系統故障,進行安全維護。  
目前官方論壇上對此的討論主要就這兩個辦法,尚未有其它更好的辦法。
©HelpOnline在線技術支持 -- HelpOnline在線技術支持,免費為您解決系統故障,進行安全維護。 
如果英語水準不錯的,可以看一下他們的Support Forum:
http://www.daemon-tools.cc/dtcc/f19-...s-support.html

http://help-online.org/bbs/topic.cgi...ic=2113&show=0
http://www.daemon-tools.cc/dtcc/showthread.php?t=9155
看看有否說明 ?

接著我又檢視了很多的國內的帖子,但看來看去,也沒有找到一個有效的辦法,許多人為此而導致USB接頭不能用了,系統出現很多不明故障.因此我最後得出結論現在還是不要安裝,否則重裝系統可不是我一個人了.現在還是用3.47版最好.等修正版出來後再安裝不遲.
以上問題如果哪位高手有解決之高見,不妨說說.也讓我等長長見識.

完美解決DaemonT4安裝問題,方案一:
第一步,這也是解決DT問題最關鍵的一步,進入C碟移除Windows\System32\Drivers\dtscsi這個系統檔案。網上有很多朋友說去下載sptdinst_x86(以下簡稱x86),這也沒錯,但是如果你不移除那個文件你是根本無法安裝x86的。

第二步,去下載x86(這裡要說明的就是要看你的系統,如果不是32bit的,就去下sptdinst_x64那個版本),下載完畢後最好直接放在C或D根目錄下。

第三步,重新啟動,在開機狀態下連續按F8進入安全模式,進入之後點開始選單——執行——輸入cmd——輸入D:——再輸入D:\sptdinst_x86.exe add, 輸入正確後你能看到出現「You need reboot........」這句,而不是像往常一樣彈出"This program will install SCSI Pass Through Direct (SPTD) layer on your computer. WARNING SPTD is not compatible with kernel mode debuggers (SoftICE, WinDBG etc.)! Please cancel setup if you plan to use kernel debugger on this machine." ,點確定。

第四步,重新啟動,在正常模式下就安裝DT4了,安裝完畢後會出現'Virtual SCSI Driver Not Detected'且右下角無圖示,這時候別著急再重新啟動

第五步,行了完成了,看到圖示沒有~~~~~~~~~:)
解決方案二:
問題My system won't boot after installation of v4, or problems with SPTD.SYS

If your system has some problems with SPTD installation you can do as follows:

If your OS is already running then go to step 2 directly.
If you cannot boot your PC at all then start from step 1.

1. Boot in safe mode and press ESC key when you see on bottom line of display:
"Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.

2. Remove or temporarily rename WINDOWS\System32\Drivers\sptd.sys.

3. Reboot again in normal mode and check if your issue is solved.

In case you had BSOD/crash you can check for minidump (in Windows\Minidump folder) related to that crash, send newest file to support@daemon-tools.cc with exact problem description.
Do NOT send minidump, if your problem is solved after removal of Starforce drivers! (Check this thread.)

Note that you have to rename sptd.sys back after the problem causing the crash is solved in order to get Daemon Tools working.

You can also download sptdinst.exe (in our download section) for your Windows version (i.e. sptdinst_x86 for 32bit Windows, spdtinst_x64 for 64bit Windows) and execute "sptdinst remove", reboot to complete de-installation.
__________________
Everybody be cool! You, be cool!
They'll keep fighting! And they'll win!

SPTDinst X86
Download: SPTDinst X86

Description: this is the standalone-package of the SPTD-driver. To remove the SPTD-driver, simple download it and via command-console, execute it "sptdinst_x86.exe remove" and SPTD will remove itself from your windows installation. If you want to add it, execute in command console "sptdinst_x86.exe add". SPTD is also used (besides DaemonTools) in some proprietary security, antivirus and monitoring applications which are not disclosed to wide public.
Size: 895 KB
Release Date and Time: Tuesday, January 10 2006, 00:30
今天我試了以上的方案,發現在我的電腦上都不一樣,按方案二安全模式上ESQ停止載入SPTD。SYS,然後移除WINDOWS\System32\Drivers\sptd.sys. ,之後REBOOT但是安裝時仍然有到開的錯誤提示。
第一種方案,我發現一開始移除Windows\System32\Drivers\dtscs..sys都一樣,因此最後又恢復了這個系統檔案,接著第二步用下載的sptdinst_x86.exe在安全模式的DOS視窗中執行sptdinst_x86.exe add,系統提示,"This program will install SCSI Pass Through Direct (SPTD) layer on your computer. WARNING SPTD is not compatible with kernel mode debuggers (SoftICE, WinDBG etc.)! Please cancel setup if you plan to use kernel debugger on this machine." 我記得在安全模式下開機時WINXP SP2已載入了sptd.sys因此此處執行這個我覺得沒有意義。因此儘管有錯誤提示我還是選項了「是」
之後彈出「you need reboot...........」於我是正常啟動WINDOWS XP SP2,開始安裝Daemon Tool 4.03,這時沒有出現錯誤提示,我正常安裝成功,執行DT順利,檢視USB也很正常,執行了一下別的程序均未發現異常。
以上是我這幾日的安裝嘗試,希望對大家有用。
__________________
http://bbsimg.qianlong.com/upload/01/08/29/68/1082968_1136014649812.gif
psac 目前離線  
送花文章: 3, 收花文章: 1631 篇, 收花: 3205 次
舊 2006-07-22, 12:24 AM   #2 (permalink)
榮譽會員
 
psac 的頭像
榮譽勳章
UID - 3662
在線等級: 級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時
註冊日期: 2002-12-07
住址: 木柵市立動物園
文章: 17381
現金: 5253 金幣
資產: 33853 金幣
預設

終於把虛擬光碟給裝上了!
系統裝好將近半年了,用起來一直很好,但有個毛病:虛擬光碟(daemon)一直裝不上。安裝是不是提示"failed to config key"就是"system file error"。今天終於到網上找了解決的方法。

具體如下:

After "System file error" message I go to Device manager,
select View - Show hidden devices. Then i select "No PnP
device drivers" item and dubleclick on SPTD. In the Driver
folder I change Autostart type to System. Restart computer
and successfully install DT4.

也就是說到「裝置管理員」裡選項「檢視」,顯示"隱藏設備",然後選項「非即插即用設備」雙按「sptd」,把裡面的「自動」改為「系統」,然後重新啟動安裝daemon tools.我裝的是4.03

還有有一些處理方法,沒用過,轉貼如下:

Maybe you could try this:
When testing Daemon Tools with Vista (it doesn't work), I discovered that a key created by sptdinst has incorrect permissions, I don't know if it is related, just give a try and give your feedback.

The key is the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\sptd\Cfg

To apply correct permissions on it, you should:
1. run regedit
2. goto the key
3. right mouse button -> permissions on th Cfg key
4. "advanced" button
5. I've got only one permission entry for administrator. Delete it
6. Check inherit from parent ... and replace permissions entries on all child objects ...

-------------------------------

Step 1. Download SPTDinst_x86.exe from here. Save to your C:\ drive for easy access.
Step 2. Restart computer in safe mode but DO NOT hit esc when windows says sptd.sys is loading.
Step 3. When safe mode starts, go into Start menu, click Run... and type "C:\sptdinst_x86.exe remove" without the quotes.
Alternate Step 3. Start windows safe mode with a command prompt. At the prompt type "C:\sptdinst_x86.exe remove" without the quotes.
Step 4. Restart your computer to boot windows normally.
Step 5. Run Daemon Tools 4.03 Installation program.
Step 6. When it asks you to restart your computer, do so, but do not enter into safe mode. Just restart normally.
Step 7. Run installation program again and it should work!

There is NO need to fiddle with the registry or to delete any sptd files from your WINDOWS/system32. This solution worked for me and I hope it works for many of you. I tried to make it as clear as possible. Good luck to everyone!
psac 目前離線  
送花文章: 3, 收花文章: 1631 篇, 收花: 3205 次
 


主題工具
顯示模式

發表規則
不可以發文
不可以回覆主題
不可以上傳附加檔案
不可以編輯您的文章

論壇啟用 BB 語法
論壇啟用 表情符號
論壇啟用 [IMG] 語法
論壇禁用 HTML 語法
Trackbacks are 禁用
Pingbacks are 禁用
Refbacks are 禁用


所有時間均為台北時間。現在的時間是 09:10 AM


Powered by vBulletin® 版本 3.6.8
版權所有 ©2000 - 2024, Jelsoft Enterprises Ltd.


SEO by vBSEO 3.6.1