2003-04-17, 12:25 PM | #1 |
註冊會員
|
家用DVD全區破解步驟......
家用DVD全區破解步驟......
http://www.dvdrhelp.com/dvdhacks 進入以上網站...在中間欄位鍵入DVD廠牌....然後在列表中選取手上擁有的DVD型號依 指示破解.....只需要遙控器就可以.... 舉例 : 小弟家中的DVD是 SAMPO DV-K575 .....所以在欄位輸入SAMPO....可是清單中 沒有DV-K575.....只有 DV-E560.....只要型號相近....甚至同一廠牌....步驟大致都 一樣....依指示...打開電視及DVD電源....遙控器先按 " SETUP (開始設定)----> 按 3-8-8-8-3-->電視出現隱藏畫面....>以遙控器上下鍵調整 region ID (區碼) 到0 或 bypass---->再按一次 SETUP...重開機....成功!!!! 從此你可以看全世界任何一區的DVD了...... |
送花文章: 566,
|
2003-04-30, 12:38 PM | #10 (permalink) |
|
我家是聯積ADV-2360的!!!
下面的步驟大概是說 The procedure must be done WITHOUT a disc in the player, must use the remote control. 1. Turn on the ADV-2360 and open the Player Tray. 打開電源然後退出光碟?!?! 2. Press SETUP on the remote to go to the setup menu 按設定鍵到選單畫面 3. Inside the setup menu, press in sequence the following buttons: ZOOM, PREV, NEXT. Then on the top of the screen you will see "XX1XX". 在選單畫面裡依序按ZOOM, PREV, NEXT!!(我家是中文的我猜是縮放,前頁,次頁!??!不曉得是不是這裡按錯了?!?!希望有聯積這台網友的也式試!!謝謝囉) 然後你會看到螢幕最上方有 "XX1XX".(我都沒出現?!?) 4. With the arrows on the remote, press left or right to change until the desired region number appears. 然後用搖控器上的箭號按左右去改直到區碼出現 5. After region is selected, press SETUP to go back to the main screen. 區碼選完後按設定回到主選單 6. Bring the popcorn and enjoy. 完成!??!?!?!?!? 請有聯積dvdplayer網友也來試式好嗎?!?提出你們的情況來~~~麻煩大家了!!謝謝了 |
送花文章: 0,
|