卸載SMS客戶端的幾種方法

[psac]

There are four methods for initiating the removal of the Systems Management Server client software from a client:
Run the SMSMAN wizard, and select the Remove Systems Management Components check box.
Modify the client's registry to add a removal value.
Change the site's boundary to exclude the Internet Protocol (IP) subnet or Internetwork Packet Exchange (IPX) network number used by a client or clients.
Run the 20clicln.bat utility from the support tools included on the SMS service pack cd or available by download from

Http://www.microsoft.com/smsmgmt/downloads/default.asp


These options are discussed further in the MORE INFORMATION section of this article.

NOTE: Each of these options requires an administrative equivalent account on the client computer to remove the SMS client software.
MORE INFORMATION
Using the SMSMAN Wizard
Run SMSMAN from the following path:
\\server\smslogon\x86.bin?

Click Next.
Select Remove Systems Management Components and then click Next.
Setting a Registry Key
To use the registry method, perform the steps below corresponding to the operating system you are using.

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

Windows 95
Use Regedit.exe to add the string value SMS Client Deinstall to the client registry under the following key and set it to TRUE: HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Client\Configuration\Client Properties

Restart the client to launch Clisvc95.exe to start a CCIM maintenance cycle.

NOTE: A restart is not required; the CCIM polling interval is 23 hours, so if you do not restart the computer, the CCIM maintenance cycle will occur later.
Windows NT
Use Regedit.exe to add the string value SMS Client Deinstall to the client registry under the following key and set it to TRUE: HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Client\Configuration\Client Properties

Stop and start the SMS Client Service to start a CCIM maintenance cycle.
Removing Client's Subnet or Network Number From the Site Boundary
You can remove Systems Management Server software from clients by removing the client's subnet/network number from the site boundaries (so that the client is no longer assigned to a Systems Management Server site). The Systems Management Server client software is removed from that client during the next maintenance interval, or by restarting the client.

To remove the subnet or network number from the site boundary, perform the following steps from in the Systems Management Server Administrator console:
Expand the Site Database property.
Expand the Site Hierarchy property.
Right-click the site and click Properties on the shortcut menu.
Click the Boundaries tab.
Right-click the subnet/network number to remove and click Delete on the shortcut menu.

You can remove the client from all x86 based operating systems by using the 20clicln.bat utility provided in the support tools:
Map a drive to the location of the 20clicln.bat file ( this location must include the 20clicln.bat, hammer.exe, kill.exe, and setevnt.exe files).
Then execute the 20clicln.bat and wait for it to complete. (This could take 15 to 20 minute