在Zeus Web Server配置PHP為Remote Responders

[psac]

在Zeus Web Server配置PHP為Remote Responders
1.安裝並且啟動zeus web server,廢話~~
2.編譯php支持fastcgi,建議使用最新release的php,增加--enable-fastcgi來configure
例如：

程式碼:--------------------------------------------------------------------------------
./configure --enable-fastcgi
make
make install
--------------------------------------------------------------------------------

3.進入zeus web server的控制台，進入要設定的vhost
下面/usr/local/bin/php不是你的php實際目錄，你可以隨意，但是兩個地方一定要一致

程式碼:--------------------------------------------------------------------------------
在API Support->FastCGI
Configuring FastCGI Remote Responders
Adding a FastCGI Remote Responder

Directory name: /usr/local/bin/php
Location: Machine name: localhost
Port: 8002
Additional methods supported?: none
--------------------------------------------------------------------------------


程式碼:--------------------------------------------------------------------------------
在URL Handling->Handlers->Adding a Handler
File Extension: *.php
Specify the path and filename of the handler, relative to the document root: /usr/local/bin/php
HTTP 404 errors are handled by: The handler
--------------------------------------------------------------------------------

4.在zeus安裝目錄下面的rc.d裡面建一script名字為S05php,並且chmod 755 S05php

程式碼:--------------------------------------------------------------------------------
#!/bin/sh

# Script to start and stop the persistent PHP runner for FastCGI.
# Please check paths before use.

# FastCGI PHP binary
FPHPBIN=/usr/local/bin/php

# Location to place semaphore
SEMFILE=/tmp/php.pid
PHP_FCGI_CHILDREN=100
PHP_FCGI_MAX_REQUESTS=1000
export PHP_FCGI_CHILDREN
export PHP_FCGI_MAX_REQUESTS

# This is Linux - use /proc to increase the local (ephemeral) port range
#echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range

if [ -z "$ZEUSHOME" ]
then
cd `dirname $0`/..
ZEUSHOME=`pwd`
export ZEUSHOME
fi

case "$1" in
'start')

if [ -e $SEMFILE ]
then
echo FastCGI PHP error: already running.Restart FastCGI PHP now
kill `cat $SEMFILE`
sleep 5
fi

if [ ! -x $FPHPBIN ]
then
echo FastCGI PHP error: please check that $FPHPBIN is executable and exists.
exit 1
fi

echo Starting FastCGI PHP.
$ZEUSHOME/web/bin/fcgirunner --user=65534 --group=65534 --pidfile=$SEMFILE 8002 $FPHPBIN
;;

'stop')
if [ -e $SEMFILE ]
then
echo Stopping FastCGI PHP.
kill `cat $SEMFILE`
rm $SEMFILE
exit 0
fi
;;
'restart')
if [ -e $SEMFILE ]
then
echo Stopping FastCGI PHP.
kill `cat $SEMFILE`
sleep 5
fi
echo Starting FastCGI PHP.
$ZEUSHOME/web/bin/fcgirunner --user=65534 --group=65534 --pidfile=$SEMFILE 8002 $FPHPBIN
;;
*)
echo "usage: $0 {start|stop|restart}"
;;

esac
exit 1
--------------------------------------------------------------------------------


對上面的script解釋：
FPHPBIN=/usr/local/bin/php #設定為php的路徑
SEMFILE=/tmp/php.pid #產生php.pid的路徑，該目錄必須可寫

PHP_FCGI_CHILDREN=100 #php工作數目
PHP_FCGI_MAX_REQUESTS=1000 #每個php的工作在退出前能夠回應的請求數，用於釋放資源
上面兩個根據硬體配置和網站訪問量設定，上面的例子是這裡的設定，預設值是8,500
一般來說 PHP_FCGI_CHILDREN > 訪問並發最大值+10
PHP_FCGI_MAX_REQUESTS 如果設定過小，訪問量大的網站會因為php工作重新啟動頻繁增加負荷

#echo 1024 65000 > /proc/sys/net/ipv4/ip_local_port_range #只用於linux

--user=65534 --group=65534 為php工作執行的用戶和組，一般設定為nobody用戶和組
FreeBSD是65534/65534，Linux是99/99

在zeus目錄下面執行 rc.d/S05php start

5.測試:在你的網站目錄下面建立php測試文件test.php

PHP程式碼:--------------------------------------------------------------------------------

<?phpinfo();?>

--------------------------------------------------------------------------------

去訪問這個文件看看是否出了php信息。。。。。。



第三步驟的/usr/local/bin/php不是你的php實際目錄，你可以隨意，但是兩個地方一定要一致