疑問 - 請問軌道一次燒錄跟光碟一次燒錄差別在哪?

如題
一直有這個疑問
所以提出來
希望大大能幫小弟解答~!

[psac]

原文由 beachboy7689 所發表
如題
一直有這個疑問
所以提出來
希望大大能幫小弟解答~!

減少間隔,(在TRACK之間會有GRAP)..還有錯誤簡查碼
DAO是結束後面再加上......


RAW-DAO 96 = 2352 bytes RAW Data + 96 Bytes P-W Subchannel Data. This is the best mode for CloneCD. It allows writing of all subchannel information, including Digital Signatures, CD-Text, ISRC, Catalog Numbers, CD+G, CD+Midi, Gaps, Indices and Crazy TOCs.
RAW-DAO 94 = 2352 bytes RAW Data + 94 Bytes P-W Subchannel Data. Same as RAW-DAO 96, but 2-Bytes CRC of the Q Subchannel are generated by the writer.
RAW-DAO 16 = 2352 bytes RAW Data + 16 Bytes P-Q Subchannel Data. This is the second best mode for CloneCD. It allows writing of most subchannel information, including most Digital Signatures, ISRC, Catalog Numbers, Gaps, Indices and Crazy TOCs. 2-Bytes CRC of the Q Subchannel are generated by the writer.
RAW-SAO = 2352 bytes RAW Data. This is the third best mode for CloneCD. Feature support is drive dependend. ISRC, Catalog Numbers and Indices can be written. Usually CD-Text, CD+G and CD+MIDI can be written as well. Crazy TOCs and Digital Signatures can't be written in this mode.
SAO = 2352 bytes error corrected Data. This is the worst mode for CloneCD. Writing of ISRC, Catalog Numbers, Indices and usually CD-Text is supported.

[weidon]

那這樣看大大這麼寫...感覺是好像軌道一次燒錄的比較好....是嗎?

還是說各有優缺點...還是說看用途(能舉例嗎?)