史萊姆論壇

返回   史萊姆論壇 > 教學文件資料庫 > 網路軟硬體架設技術文件
忘記密碼?
論壇說明 標記討論區已讀

歡迎您來到『史萊姆論壇』 ^___^

您目前正以訪客的身份瀏覽本論壇,訪客所擁有的權限將受到限制,您可以瀏覽本論壇大部份的版區與文章,但您將無法參與任何討論或是使用私人訊息與其他會員交流。若您希望擁有完整的使用權限,請註冊成為我們的一份子,註冊的程序十分簡單、快速,而且最重要的是--註冊是完全免費的!

請點擊這裡:『註冊成為我們的一份子!』

Google 提供的廣告


 
 
主題工具 顯示模式
舊 2004-03-09, 01:07 AM   #1
psac
榮譽會員
 
psac 的頭像
榮譽勳章
UID - 3662
在線等級: 級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時級別:30 | 在線時長:1048小時 | 升級還需:37小時
註冊日期: 2002-12-07
住址: 木柵市立動物園
文章: 17381
現金: 5253 金幣
資產: 33853 金幣
預設 smb設置參考手冊

今天非常感謝沉睡,可以把他這麼好的文章。那出來給大家學習。
#----------------------------------------------------------------------------------#
# smb設置參考手冊 #
# 沉睡不醒 整理撰寫 #
# #
#----------------------------------------------------------------------------------#

[global]

#----------------------------------------------------------------------------------#
# workgroup = NT-Domain-Name or Workgroup-Name
#工作組設置本地網路使用工作組名字(或者是域)否則,Windows客戶就不能從其網路鄰居中發現這個Samba服務器。當然,你要是設置成域時,要把 security = domain設置成這樣
workgroup = Sa119
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# server string is the equivalent of the NT Description field
#server string是對於本地服務器的簡單描述,這些訊息將作為這台服務器的內容,返回給#Browser,顯示在Windows客戶中作為對這個服務器的描述。
server string = Linux Smb
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
#用於限制可以訪問這台samba服務器的客戶機的IP位址範圍,以提供安全限制。預設值情#況下,這行配置被註釋了, 即所有的客戶都可以訪問這台電腦,這樣就存在一定的安全問題。
#通常可以這樣hosts allow = 192.168.0. 。整個網路號為192.168.0的機器都可以訪問,其它的都將拒絕連接(注意最後的那個".")
hosts allow = 192.168.0.
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# if you want to automatically load your printer list rather
# than setting them up individually then youll need this
#這些設置是用於設置samba服務器的列印機資源,load printer=yes就允許samba服務器對外共享服務器的列印機。
#列印機?...........我沒.............
printcap name = /etc/printcap
load printers = yes
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
#定義列印系統的類型
printing = lprng
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
#由於Mircrosoft客戶沒有用戶的概念,因此有時會用沒有用戶和密碼的請求訪問服務器,就需要將這個沒有用戶的請求映射為系統中的某個用戶,Samba服務器才能安全的訪問系統。guest account 就定義這樣的請求在Unix下對應的用戶權限。為了安全的原因,不能讓這個帳戶在系統中有可寫的權限,通常可以增加一個專用帳戶,如pcguest。如果這個設置被註釋的情況下,系統預設值使用nobody執行 Windows客戶的請求。建議不要使用nobody用戶,因為系統中的很多程序預設值都使用它,因此就會有安全問題。
#通常可以這樣做先在下面的開關設置security = share ,使smb服務工作於共享級別,刪除系統中的nobody帳號,開啟 guest account = pcguest (既去掉 ";")
#在系統裡新增一個smb組 groupadd -g 300 smb
#新增smb遊客帳號 useradd -u 300 -g 300 -d /dev/null -s /dev/null smbguest 這樣都將用smbguest這個帳號來影射訪問請求
#注意一點的是,當你把security = user設置成這樣(smb服務工作於用戶級別)一但驗證失敗,將退回到share級別
guest account = smbguest
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# this tells Samba to use a separate log file for each machine
# that connects
#這裡定義samba的日誌檔案路徑,%m用於代表從訪問的NetBIOS 電腦名,如果使用的用戶級認證,還可以使用%U表示不同的登錄用戶。例如從一名字為cainiao的電腦訪問samba服務器的日誌,將記錄在 /var/log/samba/cainiao.log檔案中。
# 一些變量說明:
#%S = 當前服務名
#%P = 當前服務的根目錄
#%u = 當前服務的用戶名
#%g = 當前用戶說在的主工作組
#%U = 當前對話的用戶名
#%G = 當前對話的用戶的主工作組
#%H = 當前服務的用戶的Home目錄
#%v = Samba服務的版本號。
#%h = 執行Samba服務機器的主機名
#%m = 客戶機的NETBIOS名稱
#%L = 服務器的NETBIOS名稱
#%M = 客戶機的主機名
#%N = NIS服務器名
#%p = NIS服務的Home目錄
#%R = 說採用的協議等級(值可以是CORE, COREPLUS, LANMAN1, LANMAN2,NT1)
#%d = 當前服務行程的ID
#%a = 客戶機的系統
#%I = 客戶機的IP
#%T = 當前日期和時間
log file = /var/log/samba/%I.log
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Put a capping on the size of the log files (in Kb).
#max log size定義每個日誌檔案的存儲限制。預設值是0,(無限制)
#一定要定義好,防止硬碟被爆掉 ^_^
max log size = 20
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Security mode. Most people will want user level security. See
# security_level.txt for details.
#認證方式,包括簡單的共享級認證和用戶級認證。Unix為多用戶操作系統,預設值就使用用戶級認證方式。當使用用戶級認證的時候,Samba服務器使用Unix操作系統的用戶和密碼(來自/etc/passwd )對用戶進行認證,這是一種獨立的認證方式。而有時候希望所有的服務器使用同一個認證資料庫進行統一認證,因此就導致出現了基於域的統一認證模式。在一個域中,用戶只需要通過域控制器進行認證即可,域中其他SMB服務器就將認可域控制器的認證。為了使Samba服務器支持域認證方式,可以有兩種不同的設置方式,一種為真正的域認證,另一種為服務器認證方式,將Samba服務器配置為通過服務器驗證用戶,這需要指定security=server,以及指定password server的名字為NT的域控制器。認證服務器的方式不能事先域認證方式提供的一些特徵,但它的適用範圍並不僅限於域,使用工作組的網路也能通過統一的認證服務器來使用統一認證模式。
#一共有4種服務級別,分別是
#share:沒有安全性的級別,任何用戶都可以不要用戶名和密碼訪問服務器上的資源。
#user:samba的預設值配置,要求用戶在訪問共享資源之前資源必須先提供用戶名和密碼進行驗證。
#server:和user安全級別類似,但用戶名和密碼是遞交到另外一個服務器去驗證,比如遞交給一台#NT服務器。如果遞交失敗,就退到user安全級,以此類推。
#domain:這個安全級別要求網路上存在一台Windows的主域控制器,samba把用戶名和密碼遞交#給它去驗證。

security = share
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
# 當服務級別使用server或者domain時,才需要設置這個
; password server = <NT-Server-Name>
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
#系統在發送用戶密碼的時候,會把密碼轉換成大寫再發送,這樣就和samba的密碼不一致,這個參數可以設定密碼裡允許的大寫字母個數,這樣samba就根據這個數目對接收到的密碼進行大小寫重組,以重組過的密碼嘗試驗證密碼的正確性。n越大,組合的次數就越多,驗證時間就越長,安全性也會因此變得越低。例如n=2,用戶的密碼是abcd,但發送出去其實是ABCD,samba就會把這個ABCD進行大小寫重組,組合後的結果可以是: Abcd, aBcd, abCd, abcD, abcd, ABcd, AbCd, AbcD,aBCd,aBcD,abCD。所以如果沒有必要,就把n定為是零。這樣的話samba只嘗試兩次,一個是接收到的密碼,另一個嘗試的是這個密碼都是小寫的情況。 username level = 8 情況類似。
; password level = 8
; username level = 8
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
#客戶機和服務器之間進行認證時,把加密密碼傳輸,這樣保證了安全性。當然你的windows工作站要支持。因為一些老式的windows系統預設值是不支持的(win95?好像現在沒幾個人用吧)
encrypt passwords = yes
#定義smb帳號密碼檔案路徑
smb passwd file = /etc/samba/smbpasswd
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
#當起用ssl模式時,這裡定義了ssl證書的位置.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with encrypt passwords and smb passwd file above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
#設定能否同步unix,smb密碼.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# You can use PAMs password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.

pam password change = yes
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Unix users can map to different SMB User names
#用戶映射檔案客戶機的用戶是admin或者administrator連接時會被當作用戶root看待。你可以開啟/etc/samba/smbusers看看裡面有什麼?
; username map = /etc/samba/smbusers
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
#針對不同的連接而使用不同的smb.conf檔案。這樣可以讓smb服務器更加強大和靈活,當然咯,在強大靈活的背後,就是會讓設置變的更加複雜,所以我沒有開啟這個參數。我怕^_^
; include = /etc/samba/smb.conf.%m
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# This parameter will control whether or not Samba should obey PAMs
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes

obey pam restrictions = yes
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# 用於配置對TCP的處理方式。不太清楚,不多廢話了。誰知道啊?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
#這個是設定把smb服務綁定到具體的網路連接頭上。否者smb服務將執行在所有的網路連接頭上。
; interfaces = 192.168.12.2/24 192.168.13.2/24
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
#當訪問共享資源時,首先要先獲取網路中的資源列表,預設值情況下browser是由網路中的每個電腦來維護的。但沒有必要每個電腦都維護整個資源列表,維護網路中當前資源列表的任務由網路上的幾個特殊電腦完成的,這些電腦被稱為Browser
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Browser Control Options:
# set local master to no if you dont want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
# 設定sam服務器是否能做為網路中的主browser
; local master = no
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
# browser優先權的設置
; os level = 33
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Dont use this
# if you already have a Windows NT domain controller doing this job
#設定smb服務器能否做為一個域的主browser,如果你的網路裡已經有pdc(主域控制器),就不能設置這裡。
; domain master = yes
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
#啟動smb的域登入服務器。
; domain logons = yes
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
#如果你採用domain方式登入,必須設置登入腳本。
#每個工作站登入腳本。
; logon script = %m.bat
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# run a specific logon batch file per username
#每個用戶的登入腳本。
; logon script = %U.bat
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
#以下是和wins(網路命名服務)服務器有關的一些設置,我不太清楚,知道的朋友,可以幫忙加上去。
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
#設定copy檔案時,保持大小寫
; preserve case = no
; short preserve case = no
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Default case is normally upper case for all DOS files
#設定檔案名是否大寫還是小寫,改成小的吧,我喜歡小的,嘿嘿~
default case = lower
#----------------------------------------------------------------------------------#

#----------------------------------------------------------------------------------#
# Be very careful with case sensitivity - it can break things!
#設定是否大小寫敏感,還是no或加";"
; case sensitive = no
#----------------------------------------------------------------------------------#


#----------------------------------------------------------------------------------#
#先看這些讓人頭大的參數:
#[xxxx] :定義共享資源的名字。
#comment = xxxx :定義共享資源的描述。
#path = /home/share :定義共享資源的物理路徑。
#writeable = yes|no :定義目錄是否可以寫。
#readonly =yes|no :同上!
#valid users = user (@group):設定可以訪問該共享資源的用戶或者組。
#invalid users = user (@group) :設定禁止訪問該共享資源的用戶或者組。
#read list = user (@group) :設定可以讀取該共享資源的用戶或者組。
#write list = user (@group) :設定可以讀取和寫入該共享資源的用戶或者組。
#admin list = user (@group) :設定可以管理該共享資源的用戶或者組。
#guest ok = yes|no :設定該共享資源是否能被來賓帳號訪問。
#public = yes|no : 同上,寫法不同而已。
#hide dot files = yes|no :是否顯示隱藏檔案。即以"."開頭的檔案。
#directory mode 0755 :定義新建目錄的權限。
#create mode 0755:定義新建檔案的權限。
#wide links = yes|no :定義是否能使用連接符號。
#大概常用的就這些了。需要注意的一點是權限設定問題,比如:定義了一個名字為:tools的共享資源。路徑為/home/smbhome/,且你已經使用writeable = yes或者write list = user (@group) 來定義了它是可以寫的。但就不能寫,why?請檢查/home/smbhome目錄的權限。也就是說,系統所設定的權限,要高於smb所設定的。
#下面用一個列子來說明如何設置共享。先把下面沒有註釋掉的字列全部註釋掉。預設值的設置不安全也不需要。
# 1.建立一個共享share。可以匿名訪問,只能讀。用戶smbuser1可以寫和讀。
# 2.groupadd -g 300 smb /*建立smb組*/
# 3.useradd -u 300 -g 300 -d /dev/null -s /dev/null smbguest /*建立來賓帳號*/
# 4.smbguest 要和你在 guest account = smbguest 字列中定義的一致。
# 5.useradd -u 301 -g 300 -d /dev/null -s /dev/null smbuser1 /*建立smbuser1帳號*/
# 6.security = user /*把smb服務設置為用戶級別*/
# 7.mkdir /home/smbhome /*建立/home/smbhome目錄*/
# 8.chown smbuser1 /home/smbhome /*設定屬主*/
# 9.chgrp smb /home/smbhome /*設定屬組*/
# 10. chmod 0775 /home/smbhome /*設定權限*/
# 11. smbpasswd -a smbuser1 /*新建smbuser1帳號並設置密碼.如果smbpasswd在你的系統上不工作,用smbadduser試下。*/
[share]
comment = linux share
path = /home/smbhome
guest ok = yes
write list = smbuser1
printable = no
directory mode 0775
create mode 0775
wide links = no
# 一些技巧和提示:
# 推介用vi來修改,因為它可以讓你的眼球感到愉快.
# 修改完成後,需要重啟動smb服務使你的設置生效,你可以用service smb restart(如果這條命令在你的系統上不工作,你可以嘗試以下的:/etc/rc.d/init.d/samba restart 或者 /etc/rc.d/init.d/smb restart)
# 你可以使用testparm | more 命令來測試你的smb.conf檔案是否有語法錯誤,並給出每個參數的詳悉設置.
# hmomes這個共享比較特殊,一般沒有對這個目錄的設定路徑。當客戶機發出服務請求時,那麼就搜索密碼檔案/etc/passwd得到用戶的Home目錄。通過Homes段,Samba可以得到用戶的Home目錄並使之共享。
#----------------------------------------------------------------------------------#

#--------------------------------Share Definitions --------------------------------#
[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
create mode = 0755
directory mode = 0755
printable = no
wide links = no
# If you want users samba doesnt recognize to be mapped to a guest user
; map to guest = bad user


# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the users home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user guest account to print
; guest ok = no
; writable = no
; printable = yes

# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in freds
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Freds Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Freds Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/local/pc/%m
; public = no
; writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other users files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Marys and Freds stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
psac 目前離線  
送花文章: 3, 收花文章: 1631 篇, 收花: 3205 次
 


主題工具
顯示模式

發表規則
不可以發文
不可以回覆主題
不可以上傳附加檔案
不可以編輯您的文章

論壇啟用 BB 語法
論壇啟用 表情符號
論壇啟用 [IMG] 語法
論壇禁用 HTML 語法
Trackbacks are 禁用
Pingbacks are 禁用
Refbacks are 禁用


所有時間均為台北時間。現在的時間是 04:33 PM


Powered by vBulletin® 版本 3.6.8
版權所有 ©2000 - 2024, Jelsoft Enterprises Ltd.


SEO by vBSEO 3.6.1