|
2004-07-08, 12:39 PM
|
#1 |
|
|
我使用VMWare 安裝Fedora Core 2卻近不了圖形介面
各位大大
小弟安裝了Fedora Core 2 我按照大大所貼的安裝教學安裝 安裝完畢後卻都近不了圖形介面 都只停留在文字介面 該怎摸辦呢 請大大幫幫我吧 謝謝 |
|
送花文章: 0,
|
|
2004-07-08, 11:46 PM
|
#6 (permalink) | |
|
長老會員
 |
引用:
是在光碟開機後的安裝畫面嗎(boot)? <  > |
|
|
__________________ 地獄變現記 [人身得來不易,願大家能尊重生命--勿傷胎命][好淫者請好自為之吧--割鳥] 南泉禪師道： 「道不屬知，不屬不知。知是妄覺，不知是無記。若真達不疑之道，猶如太虛，廓然蕩豁，豈可強是非邪？」 德山宣鑒禪師： 「如果明白無事，則勿妄求，妄求而得，亦非得也。汝但無事於心，無心於事，則虛而靈，空而妙。若毛端許，言之本末者，皆為自欺。何故？毫氂繫念，三塗業因。瞥爾情生，萬劫羈鎖。聖名凡號，盡是虛聲。殊相劣形，皆是幻色。汝欲求之，得無累乎？」 |
||
|
送花文章: 5469,
|
|
2004-07-09, 05:50 AM
|
#7 (permalink) |
|
管理版主
 |
是的是的，boot：linux vdso=0 按Enter即可。^^
下面是原文解說： After a bit of tweaking this evening, I got Fedora Core 2 Test 3 running under VMware 4.5.1. Here's how. ★Host Configuration: Toshiba Satellite Laptop 512MB RAM 40GB Internal HD Windows XP Pro SP1 with all updates VMware 4.5.1 ★Guest VM Configuration: Fedora Core 2 Test 3 (downloaded .iso files) "Other Linux 2.6.x Kernel" 256MB RAM 4GB HD (/dev/sda1 = /boot, /dev/sda2 = /) 1GB HD (/dev/sdb1 = <swap>) Installation 1.Boot installation CD. 2.At boot: prompt, type "linux vdso=0". This is very important, otherwise VMware will crash. 3.Install as usual, configure however you like. You'll need to ensure "vdso=0" is set in the "advanced boot configuration" options. 4.If you just reboot at the end of the install, the system will "freak out" a bit trying to start the x server. You can avoid this by editing the boot line (at the Fedora grub splash screen) and appending a 3 to the line. 5.Boot. 6.Unpack the VMware Tools tarball, then apply the patch below (vmware-fc2t3.patch) to vmwares-tools-distrib/bin/vmware-config-tools.pl. 7.Install VMware tools. Use the defaults for all questions, except say NO when asked if you want to compile a vmhgfs module. It doesn't seem compile with the 2.6 kernel headers. 8.Reboot, and enjoy. Notes: 1.Thanks to Daniel Arial at VMware for the "vdso=0" tip. I would have never found this on my own! 2.Don't take this patch or these instructions too seriously. I just came up this this while hacking around tonight. All of the usual disclaimers apply. Your mileage may vary. I am not responsible for data loss, unusual hair growth, or any other rude behavior exhibited by your computer. You have been warned. 3.In my experience, Fedora Core 2 Test 3 is extremely slow under VMware 4.5.1 (much slower than FC1). It takes about 11 minutes (!!) from the grub splash screen to the GUI login prompt. This is probably in large part due to the eleventy-bazillion services installed by default. 4.I've noticed some bizarre problems with initialzing the guest keyboard and mouse. Apparently, if the VMware VM doesn't have focus while the guest OS is booting, there is a non-zero chance the keyboard will not initialize correctly. Or, the failure could just be completely random; I don't know yet. FWIW, I've never seen this with other guest OS's, only FC2T3. 轉自：http://kerneltrap.org/node/view/3097 |
|
|
送花文章: 90,
|
|
2004-07-12, 11:22 PM
|
#11 (permalink) |
|
註冊會員
|
Fedora Core 1
ftp://linux.nctu.edu.tw/iso/fedora/1...i386-disc1.iso ftp://linux.nctu.edu.tw/iso/fedora/1...i386-disc2.iso ftp://linux.nctu.edu.tw/iso/fedora/1...i386-disc3.iso Fedora Core 2 ftp://linux.nctu.edu.tw/iso/fedora/2...i386-disc1.iso ftp://linux.nctu.edu.tw/iso/fedora/2...i386-disc2.iso ftp://linux.nctu.edu.tw/iso/fedora/2...i386-disc3.iso |
|
|
送花文章: 0,
|
|
2004-07-12, 11:23 PM
|
#12 (permalink) |
|
管理版主
|
引用:
|
|
|
送花文章: 90,
|
 |
|
|
相似的主題
|
||||
| 主題 | 主題作者 | 討論區 | 回覆 | 最後發表 |
| Fedora Core 4 公開測試版 2 | 飛鳥 | 網路疑難應用技術研討區 | 1 | 2005-04-14 10:25 PM |
| Rebhat Fedora Linux Core 1 (Red Hat 10) Released | babayu | 網路疑難應用技術研討區 | 20 | 2003-11-26 02:52 PM |
| foobar2000 | new2003 | 一般電腦疑難討論區 | 0 | 2003-10-30 10:07 AM |
平板模式
