|
|
|||||||
| 論壇說明 |
|
歡迎您來到『史萊姆論壇』 ^___^ 您目前正以訪客的身份瀏覽本論壇，訪客所擁有的權限將受到限制，您可以瀏覽本論壇大部份的版區與文章，但您將無法參與任何討論或是使用私人訊息與其他會員交流。若您希望擁有完整的使用權限，請註冊成為我們的一份子，註冊的程序十分簡單、快速，而且最重要的是－－註冊是完全免費的！ 請點擊這裡：『註冊成為我們的一份子！』 |
 |
|
|
主題工具 | 顯示模式 |
|
|
2004-09-13, 01:49 PM
|
#4 (permalink) | |
|
長老會員
 
|
引用:
First It will ask for how many cache do you want to set. (64 and 128), then Before you complete it have to set up the raid mode. If you set raid 0, that should be no problem. If you set raid 1, the 2 harddisk would two in one. reference: "# RAID-0. This technique has striping but no redundancy of data. It offers the best performance but no fault-tolerance. # RAID-1. This type is also known as disk mirroring and consists of at least two drives that duplicate the storage of data. There is no striping. Read performance is improved since either disk can be read at the same time. Write performance is the same as for single disk storage. RAID-1 provides the best performance and the best fault-tolerance in a multi-user system." If set raid 1, you should only read 1 80G storage. The most inportant that you should go to Bios and check up the harddisk status. Then go to your os and check do you install the tools that is for S-ATA Raid control which should include your mb's provided software. Install it and restart your OS. I hope you can solve it out. Bless you~~~ |
|
|
__________________ 提供下載之附件為測試及學術用途! 必須24小時內刪除，不能轉讓或出售!  請支持購買正版，尊重智識產權! |
||
|
送花文章: 1,
|
混合模式
