引用:
作者: RaveBB
我是用NF7-S 2.0
HD是死雞80g sata
目前只看的到一顆
第二顆硬碟看不到Q_Q
|
Raid 0, or Raid 1.
First It will ask for how many cache do you want to set. (64 and 128), then Before you complete it have to set up the raid mode. If you set raid 0, that should be no problem. If you set raid 1, the 2 harddisk would two in one.
reference:
"# RAID-0. This technique has striping but no redundancy of data. It offers the best performance but no fault-tolerance.
# RAID-1. This type is also known as disk mirroring and consists of at least two drives that duplicate the storage of data. There is no striping. Read performance is improved since either disk can be read at the same time. Write performance is the same as for single disk storage. RAID-1 provides the best performance and the best fault-tolerance in a multi-user system."
If set raid 1, you should only read 1 80G storage. The most inportant that you should go to Bios and check up the harddisk status. Then go to your os and check do you install the tools that is for S-ATA Raid control which should include your mb's provided software. Install it and restart your OS. I hope you can solve it out. Bless you~~~