我的燒錄機會燒到一半就會產生一些訊息
結果燒錄就失敗囉
有誰能幫我解決呢????????
拜託囉
就如下列所顯示的一樣
windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 2000/6/8 PM 05:00:00
Nero Version: 5.5.9.15 (Nero Express)
Recorder: <ATAPI CD-R/RW 24X10> Version: P.JJ - HA 1 TA 1 - 5.5.9.15
Adapter driver: <ESDI_506> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TEAC CD-540E> Version: 1.0A - HA 0 TA 0 - 5.5.9.15
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
TEAC CD-540E (Target 0, E
: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
ATAPI CD-R/RW 24X10 (Target 1, F
: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261580kB)
Free physical memory: 79MB (81284kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
3.3.2003
CD Copy
PM 08:11:19 #1 Phase 87 File dlgbrnst.cpp, Line 1571
Seamless Link activated
PM 08:11:19 #2 Text 0 File Reader.cpp, Line 118
Reader running
PM 08:11:19 #3 Text 0 File Writer.cpp, Line 127
Writer ATAPI CD-R/RW 24X10 running
PM 08:11:19 #4 Phase 48 File dlgbrnst.cpp, Line 1571
Analyzing CD
PM 08:11:20 #5 CDCOPY -1 File CDCopy.cpp, Line 2378
The CD is copyrighted
PM 08:11:24 #6 Text 0 File CDCopy.cpp, Line 2599
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 298146 298145 ( 66:17.20)
PM 08:11:24 #7 Text 0 File CDCopy.cpp, Line 1038
Copy options: read subcode: OFF jitter correction: OFF copy on-the-fly: ON
read ISRC/MCN: ON ignore inv. TOC type: ON ignore audio read error: ON
source disc does not look like CD Extra
01. 0 - 298146 = 298146, data (0)
PM 08:11:24 #8 Text 0 File Burncd.cpp, Line 3590
Turn on Disc-At-Once, using CD-R/RW media
PM 08:11:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 662
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 298146 (298146) = #298146/66:15.21
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
PM 08:11:25 #10 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 298145 (66:17.20)
PM 08:11:25 #11 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
PM 08:11:25 #12 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: ATAPI CD-R/RW 24X10;
CDRW code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
PM 08:11:25 #13 Text 0 File BurnCDUtil.h, Line 129
Enable auto-insert wasn't successfull for all drives.
PM 08:11:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 814
Prepare recorder ATAPI CD-R/RW 24X10 for write in raw writing
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_ULTRARAW96, 2448/0x4, ISRC "", FilePos 0 367200 730228608
PM 08:11:25 #15 Text 0 File ThreadedTransferInterface.cpp, Line 662
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 298146 (298146) = #298146/66:15.21
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96, 2448, config 0x4, wanted index0 0 blocks, length 298146 blocks [ATAPI CD-R/RW 24X10 ]
--------------------------------------------------------------
PM 08:11:25 #16 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 4x (600 KB/s)
PM 08:11:25 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0
PM 08:11:25 #18 Text 0 File Mmc.cpp, Line 12734
StartDAO : CD-Text - Off
PM 08:11:25 #19 Text 0 File Mmc.cpp, Line 17280
Set BUFE: Seamless Link -> ON
PM 08:15:53 #20 SCSI -1093 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02390000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0xFF
CDB Data: 0x2A 0x00 0x00 0x00 0xEF 0xCA 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0xFF
PM 08:15:53 #21 MMC -1093 File Writer.cpp, Line 335
No seek complete
PM 08:15:53 #22 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
PM 08:15:53 #23 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
PM 08:15:53 #24 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 4x (600 KB/s)
PM 08:15:53 #25 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 2000/6/8 PM 05:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 2002/3/11 PM 06:55:38
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 2000/6/8 PM 05:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 2000/6/8 PM 05:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 2000/6/8 PM 05:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 2000/6/8 PM 05:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 2000/6/8 PM 05:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 2000/6/8 PM 05:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 2000/6/8 PM 05:00:00 (Adapter driver for src)
Registry Keys:
違規原因是...
2.發表主題嚴禁重複張貼或是
無內容的主題!
詳細規定請參閱版規