官方對Windows SBS 2003,Windows Server 2003 SP1 相關問題的解釋
Windows Small Business Server 2003
and Windows Server 2003 SP1
Known Issues
Microsoft Corporation
Published: April 2005
Version: 1
Overview
Although Windows Server 2003 Service Pack 1 (SP1) is now available for public distribution, it is recommended that you wait to install this service pack until Service Pack 1 for Windows SBS is released.
This document describes the top known issues that you might encounter when installing Windows Server 2003 SP1 on the Microsoft® Windows® Small Business Server 2003 server software (Windows SBS).
If you have already installed Windows Server 2003 SP1, it is not necessary to uninstall the service pack as it is a prerequisite to installing Windows SBS SP1. However, if you must uninstall Windows Server 2003 SP1 to address a known issue, you will be required to reinstall the service pack when you install Windows SBS SP1 once it becomes available.
Known Issues
The Remote Access Wizard fails to create a Connection Manager configuration package after installing Windows Server 2003 SP1
If you run the Remote Access Wizard after installing Windows Server 2003 SP1, you will receive an error when the wizard attempts to create the Connection Manager configuration package file. To correct this problem, uninstall Windows Server 2003 SP1, and then run the Remote Access Wizard again.
To uninstall Windows Server 2003 SP1
1. Click Start, point to Control Panel, and then click Add or Remove Programs.
2. In the Add or Remove Programs dialog box, select Windows Server 2003 Service Pack 1, and then click Remove.
3. In the Windows Server 2003 Service Pack 1 Removal Wizard, click Next to uninstall the service pack.
To run the Remote Access Wizard
1. If necessary, open Server Management by clicking Start, and then clicking Server Management.
2. In the console tree, click Internet and E-mail.
3. In the details pane, click Configure Remote Access.
4. Follow the instructions on the screen to complete the wizard.
Note
* This problem is corrected in Windows Small Business Server 2003 Service Pack 1 when it becomes available.
The Change Server IP Address tool fails after installing Windows Server 2003 SP1
The Change Server IP Address tool fails to change the IP address of your server after installing Windows Server 2003 SP1 on a computer running Windows SBS. To correct this problem, uninstall Windows Server 2003 SP1, and then run the Change Server IP Address tool again. After you have done this, run the Configure E-mail and Internet Connection Wizard to ensure that your networking settings are configured correctly.
To uninstall Windows Server 2003 SP1
1. Click Start, point to Control Panel, and then click Add or Remove Programs.
2. In the Add or Remove Programs dialog box, select Windows Server 2003 Service Pack 1, and then click Remove.
3. In the Windows Server 2003 Service Pack 1 Removal Wizard, click Next to uninstall the service pack.
To run the Change Server IP Address tool
1. If necessary, open Server Management by clicking Start, and then clicking Server Management.
2. In the console tree, click Internet and E-mail.
3. In the details pane, click Change Server IP Address.
4. Follow the instructions on the screen to complete the wizard.
To run the Configure E-mail and Internet Connection Wizard
1. If necessary, open Server Management by clicking Start, and then clicking Server Management.
2. In the console tree, click Internet and E-mail.
3. In the details pane, click Connect to the Internet.
4. Follow the instructions on the screen to complete the wizard.
Note
* This problem is corrected in Windows Small Business Server 2003 Service Pack 1 when it becomes available.
If you uninstall Windows Server 2003 SP1 from a computer running Windows SBS, the Fax service does not start and the Fax Configuration Wizard fails to complete
To correct this problem, use the registry editor Regedit.exe to modify the registry entry that is causing the problem.
Caution
* Incorrectly editing the registry can severely damage your system. Before making changes to the registry, you should back up any valued data that is stored on the computer.
1. To open the registry editor, click Start, click Run, type regedit, and then click OK.
2. In the registry editor, select the following key:
HKey_Local_Machine\Software\Microsoft\Windows\Currentversion\Telephony\Country List
3. Right-click the entry CountryListVersion, and then click Modify.
4. Change the 類型 data field to 0, and then click OK.
5. Close the registry editor and restart the computer.
6. After the computer restarts, click Start, and then click Server Management.
7. In Server Management, click the Fax node, and then click Configure Fax Services.
8. Follow the instructions on the screen to complete the wizard.
Copyright Notice
Information in this document, including URL and other Internet Web site references, is subject to change without notice and is provided for informational purposes only. The entire risk of the use or results from the use of this document remains with the user, and Microsoft Corporation makes no warranties, either express or implied. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.
© 2005 Microsoft Corporation. All rights reserved.
Microsoft, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
The names of actual companies and products mentioned herein may be the trademarks of their respective owners.
立即下載!WinServer2003 SP1攔截工具
週二，微軟發怖了一個「攔截工具包」，它允許公司機器暫時關閉Windows Server 2003 Service Pack 1 (SP1)的自動下載功能。
這個工具包類似於去年微軟發怖的Windows XP Service Pack 2 (SP2)攔截工具。 Windows Server 2003 SP1在今年3月份首度亮相，匯聚了許多安全方面的修復修正檔和更新程序，而到7月份，該系統用戶將可以通過Automatic Update以及Windows Update下載這個服務包。
不過，如同Windows XP SP2一樣，Windows Server 2003 SP1也跟微軟部分以及第三方程序存在相容性問題。微軟曾表示，小於10％的伺服器軟體不能通過測試，但這些軟體大部分都已經推出修復修正檔。
由於潛在相容性問題，以及其他企業測試和組態方案，微軟官員承認，部分用戶可能需要更長的時間來準備SP1的下載以及組態。
根據微軟官員反映，在2006年3月30日前，SP1攔截工具都能攔截SP1的自動下載，但其他微軟安全更新則不納入攔截範圍。
點擊下載Win Server 2003 SP1攔截工具
http://www.microsoft.com/downloads/d...displaylang=en
Dr.eye 譯典通 2005 for Win2003 SP1 補強程序
http://www.dreye.com.cn/download/fil...in2003-SP1.exe
官方出的。