引用:
|
原文由 a471 所發表
其實這是店家做生意的一種方式,有的店家會開宗明義的跟你說明板子規格上不
能用0.13製程處理器只可以用0.18的,有的老闆私下自己變通就錯就錯把0.18
當0.13賣你,剛好你自己又分辨不出來差異性就中他招囉....
其實就XP來說0.13是電壓比較低溫度比較低超頻性會比較好,0.18溫度高一些
其他就沒什麼差異了,不知道你是哪一張板自己去技嘉看看有無支援0.13的處理
器吧,假如板子有支援那就是老闆故意坑你了...
|
這是小弟那塊版子的一些訊息小弟不知道要怎麼判斷這塊版子是否有支援.13的所以就都把他的資訊copy下來了
因為小弟之前都是使用intel的處理器這是第一次使用amd的產品所以對amd熟悉度不夠又過份輕信他人這是小弟的錯誤。
GA-7DXE
AMD-761™ AGPset
PROCESSOR
Socket A for AMD Athlon™/AMD Athlon™ XP/Duron™ 200/266MHz FSB processors
Supports 500MHz ~ 2000+ and faster
CHIPSET
AMD 761™ north bridge and VIA 686B south bridge
AC97 codec
MEMORY(DDR)
Supports up to 3GB DDR SDRAM
2.5V/2.7V/2.9V DDR memory voltage adjustable
3 DIMMs of 184-pin DDR sockets
Supports either PC1600/DDR200 or PC2100/ DDR266 DDR memory
Supports 72bits ECC type DRAM integrity mode
SLOT
1 x AGP 4X
5 x PCI slots support 33MHz and PCI 2.2 compliant
I/O
2 x UDMA ATA 66/100 bus master IDE ports on board
1 x FDD, 2 x COM, 1 x LPT, PS/2 Keyboard, PS/2 Mouse on board
1 x joystick, 1 x line-in, 1 x line-out and 1 x MIC on board
2 x USB 1.1 ports on board, 2 x USB 1.1 by cable
IrDA TX / RX header
POWER
ATX power connector
Power-off by Windows® 95/98/Me/2000/XP/NT shut down and Switch
FORM FACTOR
ATX form factor, 4 layers PCB (30.5 x 24.4 cm)
H/W MONITORING
2 cooling fan connectors
System health status detect and report by BIOS
H/W detect and report Power-in voltage, CPU voltage and CMOS battery status
BIOS
IDE#1~#2, SCSI, LS120, ZIP and CD-ROM bootable
AC recovery ON/OFF control
Auto-detect and report system health status
Supports @BIOS™
OTHER FEATURES
Suspend-To-RAM (STR)
Supports USB KB Wake up from S3
Provides 2 fan power connectors
Poly fuse for keyboard over-current protection
Supports EasyTune III™ and Q-Flash
DRIVER
AMD service pack utility
AC97 driver