該怎樣新裝一顆硬碟?

[a471]

原文由 柯維 所發表
... .
.....
上面幾點是它的位置我分別用123 5
67890
來說明:
目前是1跟6套一起
2跟3套一起
這樣應該不是
因為一開始一顆的時候就是這樣用
請指教

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.

(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.

(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.

(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
http://www.maxtor.com/en/support/pro..._100/index.htm
應該是這顆吧..7200RPM..U/100