查看單個文章
舊 2008-02-21, 03:57 PM   #1
bobyou
註冊會員
榮譽勳章

勳章總數0
UID - 293881
在線等級: 級別:1 | 在線時長:10小時 | 升級還需:2小時
註冊日期: 2008-02-20
文章: 13
精華: 0
現金: 24 金幣
資產: 24 金幣
預設 stop:0x0000007B 錯誤訊息,無法安裝 Windows XP



安裝作業系統到硬碟的過程出現停止錯誤訊息 ( 如下 ):

A problem has been detected and windows has been shutdown to prevent
damage toyou computer.

If his is he first time you've seen this stop error screen, restart your
computer.

If this screen appears again, follow these steps:
check for viruses on your computer. Remove any newly installed hard drives
or hard drive controllers check yor hard drive to make sure it is properly
configured and terminated.

Run CHKDSK /F to check for hard drive corruption, and the restart your
computer.

*** stop:0x0000007B(0XF7CAE524,0XC0000034,0X00000000,0X00000000)

詳細情形請看 --> http://www.wretch.cc/blog/BobYou&article_id=12962531

如果,有錯誤或疑問請告訴我,謝謝。


=====================================

造成出現停止錯誤訊息的原因,是因為在以光碟機開機時,安裝 windows 前要載入所有
已連接硬體的驅動程式,而此時 IDE 介面硬碟排線有接但無電源,無法正常工作,驅動
程式無法載入也無法驅動此硬碟,於是出現停止錯誤訊息,停止錯誤訊息是指 IDE 介面
硬碟的硬體問題,不是指 SATA2 組 RAID 0 的硬體問題。

此帖於 2008-03-06 11:00 PM 被 bobyou 編輯. 原因: 問題已自行解決
bobyou 目前離線  
送花文章: 0, 收花文章: 0 篇, 收花: 0 次
回覆時引用此帖