[ISAM]

作者: 不飛

http://drivers.alege.net/6575/Zonet-...-download.html

http://www.zonetusa.com/ProductDownload/ZEN1100B-02.zip

謝不飛大大幫忙!!

但在將磁片放入A:/後它並未出現任何點選畫面. 於是我看了下READ.TXT.. 從方法[2]- [6] 是任選一種來執行就行了對嗎?

以 [2]. Installation for DOS ODI Driver 來說,

1. For those who installed EMM386.EXE in your config.sys, please exclude
memory address D400-D7FF from your system. PCMCIA Ethernet card enabler
program will use this space to read Ethernet ID and CIS from on-board
flash memory.
[Example]
DEVICE=EMM386.EXE NOEMS X=D400-D7FF
or
DEVICE=EMM386.EXE NOEMS X=D000-DFFF

2. User need to add "LASTDRIVE=[Device Name]" in the Config.sys file,
then reboot Notebook. Example, if you want to login to Device "N",
the string is "LASTDRIVE=M".

3. Enable the FastEthernet PC Card
The EN100.EXE is a PCMCIA controller enabling program. This enable
program only need for DOS and Windows 3.1 system. You don't need
installed the Socket and Card service in your Notebook before
executing the enabler.
In DOS command, go to "\ODI", then type "EN100 [/IRQ:x][/IOP:xxx]"
* IRQ - system interrupt number required for the FastEthernet card.
* IOP - card's I/O port address assignment in HEX format.
The default syntax is "EN100 /IRQ:5 /IOP:300".

4. Getting Started the Novell DOS ODI Driver:
This directory "\ODI" contains FastEthernet DOS ODI driver.
You need the following files to install DOS ODI DRIVER.
a. LSL.COM: supplied by Novell
b. LNAX100.COM: DOS ODI driver, supplied by card manufacturer
c. IPXODI.COM: supplied by Novell
d. NETX.EXE: supplied by Novell
e. NET.CFG: optional configuration file

Type "STARTNET" at the DOS prompt will execute the files above,
then you can login to the file server.


但

2. User need to add "LASTDRIVE=[Device Name]" in the Config.sys file,
then reboot Notebook. Example, if you want to login to Device "N",
the string is "LASTDRIVE=M".

我用記事本開了Windows下的Config.sys檔, 裏頭有 [menu][CD][NOCD][HELP][COMMON] 這幾項, 我該怎麼把 Config.sys 做修正呢?

還有
please exclude
memory address D400-D7FF from your system 這個要怎麼exclude