請問播放 DVD 時斷斷續續的 ...

poshanchang · 2004-01-25, 07:53 PM

感謝您的詳細解說
我把所有其他的 codec 移掉了
我的主機板是技嘉的 GA-6VX7-4X
試了其他的 DVD 也有一樣的問題

對了 .. .我剛剛想要把 IDE 的 PIO 模式改為 DMA 模式
但是不行耶 ... 我已經知道在裝置管理員的哪裡改
但是還是改不過來耶

我也找到微軟的這份文件
告訴我怎麼調 DMA
但是就是改不過去耶
由人遇過嗎?
http://support.microsoft.com/default...b;en-us;317962

SYMPTOMS
DVD playback performance may be poor if your DVD drive is set to run in Program Input/Output (PIO) mode instead of Direct Memory Access (DMA) mode. For example, in programs such as software DVD decoding, you may experience significant frame loss and/or audio or video synchronization problems.

CAUSE
Both PIO and DMA (also known as bus mastering) are modes of data transfer for ATAPI drives. However, PIO mode consumes more CPU time, and transfers data more slowly than DMA mode. Because of this, using PIO mode for DVD drives can adversely affect performance. Other factors that can also impact DVD playback performance include CPU speed, amount of memory, video adapter and video resolution, sound card drivers, software/hardware decoder that is used, CPU utilization, and the DVD viewing software that is used.

RESOLUTION
To resolve this issue, set your DVD drive to run in DMA mode instead of PIO mode. For additional information about how to do so, click the article number below to view the article in the Microsoft Knowledge Base:

247426 Device Settings Are Hard to Find in Windows

http://support.microsoft.com/default...b;EN-US;247426

我也試了這個方法

http://www.microsoft.com/whdc/hwdev/...e/ide-dma.mspx

• Change the selection from "DMA if available" to PIO only, and click OK.

• Then repeat the steps above to change the selection to DMA if Available.

但是還是不行改成 dma 模式耶

感謝

2004-01-25, 07:53 PM	#1 (permalink)
poshanchang 註冊會員榮譽勳章勳章總數 UID - 21278 在線等級: 註冊日期: 2003-01-03 住址: 台北文章: 332 精華: 0 現金: 34 金幣資產: 34 金幣	感謝您的詳細解說我把所有其他的 codec 移掉了我的主機板是技嘉的 GA-6VX7-4X 試了其他的 DVD 也有一樣的問題對了 .. .我剛剛想要把 IDE 的 PIO 模式改為 DMA 模式但是不行耶 ... 我已經知道在裝置管理員的哪裡改但是還是改不過來耶我也找到微軟的這份文件告訴我怎麼調 DMA 但是就是改不過去耶由人遇過嗎? http://support.microsoft.com/default...b;en-us;317962 SYMPTOMS DVD playback performance may be poor if your DVD drive is set to run in Program Input/Output (PIO) mode instead of Direct Memory Access (DMA) mode. For example, in programs such as software DVD decoding, you may experience significant frame loss and/or audio or video synchronization problems. CAUSE Both PIO and DMA (also known as bus mastering) are modes of data transfer for ATAPI drives. However, PIO mode consumes more CPU time, and transfers data more slowly than DMA mode. Because of this, using PIO mode for DVD drives can adversely affect performance. Other factors that can also impact DVD playback performance include CPU speed, amount of memory, video adapter and video resolution, sound card drivers, software/hardware decoder that is used, CPU utilization, and the DVD viewing software that is used. RESOLUTION To resolve this issue, set your DVD drive to run in DMA mode instead of PIO mode. For additional information about how to do so, click the article number below to view the article in the Microsoft Knowledge Base: 247426 Device Settings Are Hard to Find in Windows http://support.microsoft.com/default...b;EN-US;247426 我也試了這個方法 http://www.microsoft.com/whdc/hwdev/...e/ide-dma.mspx • Change the selection from "DMA if available" to PIO only, and click OK. • Then repeat the steps above to change the selection to DMA if Available. 但是還是不行改成 dma 模式耶感謝

	送花文章: 6, 收花文章: 6 篇, 收花: 16 次

Google 提供的廣告