快風ㄌ
 

Windows 98 has detected that drive C does not contain a validl FAT or
FAT32 partition. There are several possible causes.

1. The drive may need to be partitioned. To create a partition on the
drive,run FDISK from the MS_DOS command prompt.

2. You may be using third-party disk-partitioning software. If you are
using this type of software, remove the Emergency Boot Disk and restart you
computer. Then, follow the on-screen instructions to start your computer
from a floppy disk.

3. Some viruses also cause your drive C to not register. You can use a virus
scanning program to check your computer for viruses.

The diagnostic tools were successfully loaded to drive C.

To get help, type HELP and press ENTER.

A:\>format C:
Format not supported on drive C:
Format terminated.
因為禁不去windows 98就用開機片
要砍檔崇灌98
不過開機片開機時跑出一堆上面文字
也砍不掉檔案

98不能開機就用98開機片開機下SYS C:就好啦.....
你98所在分割區的格式是什麼的?

請您先執行fdisk再建立一個partiton,然後format後再安裝win98.
這個訊息說hd的partition出現問題. 如果您以前用的是2000/xp的ntfs系統,那麼重新安裝win98也會出現這個訊息.

應該是NTFS與FAT32的問題您重新建立磁區看看
您會用SPEED FDISK這軟體嗎他可以很簡單的轉換喔