|2003-05-08, 07:50 PM||#1|
Windows 98 has detected that drive C does not contain a validl FAT or
FAT32 partition. There are several possible causes.
1. The drive may need to be partitioned. To create a partition on the
drive,run FDISK from the MS_DOS command prompt.
2. You may be using third-party disk-partitioning software. If you are
using this type of software, remove the Emergency Boot Disk and restart you
computer. Then, follow the on-screen instructions to start your computer
from a floppy disk.
3. Some viruses also cause your drive C to not register. You can use a virus
scanning program to check your computer for viruses.
The diagnostic tools were successfully loaded to drive C.
To get help, type HELP and press ENTER.
Format not supported on drive C: