WINXP 啟動失敗~ 求教各位前輩們~

朋友的 WINXP OS 啟動時遇到藍底白字訊息, 小弟試著將此硬碟以USB 外接盒方式連接到其他電腦以便診斷狀況...

1. 系統試著讀取此硬碟馬上跳出此藍底白字畫面.... ( 傷腦筋 )
2. 以硬碟外接盒方式讀取也會出現此訊息... ( 唉... )
3. 以 WINXP 原版光碟開機試著以 " Repair 修復功能 " 一讀取也出現此訊息... ( 沒力了... )
4. 試著重新安裝此硬碟, 又出現此訊息 ( 昏倒啊 )...

求教各位前輩有無其他方式? 因硬碟中有重要資料必須搶救啊~~~~ ( 回音 )

以下訊息為發生時的狀況~

-------------------------------

藍底白字...

A problem had been detected and windows has been shut down to prevent damage to your computer.

If thisis the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Disable or uninstall any anti-virus, disk defragementation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

*** STOP 0x00000024 ( 0x001902F8, 0xFA2EB8FC, 0XFA2EB3FC, 0Xf9D98411 )

*** ntfs.sys - address F9D98411 base at F9D2A000,Datastamp 3b7dc5d0

-------------------------

感激不盡~

Ray Ho

開機按F8選上一次正常開機若不行則選安全模式(會等待一點時間)

感謝 wangch 的資訊...

您的方式小弟也試過但還是出現 " 藍底白字 " 訊息...

無論進入 " 安全模式 " or " 上一次正常開機 " 都一樣耶...

---------------------------------

再次請教各位高手~

Ray Ho