燒錄 - 最近燒出來的片子，都有好幾圈，而且是一直間隔，這是怎麼了?

[murder.wang]

燒錄機：Benq DW1640
韌體：BSRB
這一個禮拜才發生的，且燒出來的電影都斷斷續續的，我想應該是出現那個一圈一圈的問題，這是代表我的燒錄機掛了嗎?

韌體更新至現在的版本後，再用Nero，它就乾脆出現error，不讓我繼續燒，我是有存下log，不知哪位高手可以幫忙解讀一下。

T-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0

Recorder: <BENQ DVD DD DW1640> Version: BSRB - HA 1 TA 4 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ASUS DVD-E616P2 >Version: 1.08 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DVD-E616P2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ExcelStor Technology ES3220 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-22JHA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1640 F: CDRom4
ASUS DVD-E616P2 G: CDRom0
AXV CD/DVD-ROM I: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 318MB (325680kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.5.2008
燒錄DVD映像檔
上午 12:13:30 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

上午 12:13:30 #2 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

上午 12:13:31 #3 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2294021 (509:46.71, 4480MB)

上午 12:13:31 #4 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD DVD)

上午 12:13:31 #5 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: BENQ DVD DD DW1640, Media type: DVD+R

上午 12:13:31 #6 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

上午 12:13:31 #7 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM模式1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2294022 (2294022) = #2294022/509:46.72
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293872 blocks [F: BENQ DVD DD DW1640]
--------------------------------------------------------------

上午 12:13:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: BENQ DVD DD DW1640] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698157056, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2294022 | 2293872 | 0x00
0 | 1 | 1 | 0x41 | 2294022 | 2293872 | 0x00
2294022 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

上午 12:13:31 #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

上午 12:13:31 #10 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

上午 12:13:31 #11 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

上午 12:13:31 #12 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

上午 12:13:31 #13 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11,080 KB/s)

上午 12:13:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

上午 12:13:31 #15 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x06460200: Len x804

上午 12:13:31 #16 CDR -1207 File DVDR.cpp, Line 6174
Book Type automatically set to: 目前燒錄器設定

上午 12:13:31 #17 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

上午 12:14:39 #18 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
Buffer x22040040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

上午 12:14:39 #19 CDR -1176 File Writer.cpp, Line 299
Session fixation error
F: BENQ DVD DD DW1640

上午 12:14:40 #20 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

上午 12:14:40 #21 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders

上午 12:14:45 #22 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
F: BENQ DVD DD DW1640

上午 12:14:48 #23 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

上午 12:14:50 #24 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 8x (11,080 KB/s)

上午 12:14:52 #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

上午 12:14:55 #26 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

上午 12:14:55 #27 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 2002/8/14 下午 03:03:36
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005/3/12 上午 06:28:14 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)