請教各位一個關於封鎖驢子的問題

[Omar Lin]

目前小弟使用環境是架一台Server,讓下面的電腦可以透過這台Server上網,
之前用proxy的方式是可以封鎖住驢子,但是後來覺得太麻煩了,所以拿掉proxy
,改用DHCP及共享的方式加上防火牆,不過很怪的是,竟然封不住驢子....@@
將port封住3000-5999了,用監控軟體看還是開這些port出去,防火牆是用
ZoneAlarm Pro這套,還有沒有其他的方式可以封得住呢?
指用軟體喔...指不購買硬體或是再架proxy的方式~~

[a471]

老闆...ZoneAlarm Pro應該可以封住吧?會不會是你哪邊沒設定好?
不然換賽門鐵克的防火牆試試看...

[ronbaby]

如版大所說是否沒設好呢???
我去查了一下應該是可以設定的

不然找看看軟體的proxy 看看囉http://toget.pchome.com.tw/intro/network_tool/network_tool_server/17266.html
可控制頻寬的說

從控制頻寬下手
參考看看

[Omar Lin]

我已經針對驢子的port封住了,驢子大多是走4662 port出去~~
不過我用監控軟體看....怎麼還是這樣ㄋㄟ~~
proxy是個好方法,不過就是在clinet端得設定,還有一些其他較不方便之處~
我現在已經換NIS的了,在研究中..

[a471]

你們家驢子比較聰明...牠會繞路....理論上應該可以封鎖它的才對，這軟體我以
前用過..

驢了不是可以改port嗎？
像我在學校時都是改用86，87來避開學校的防火牆
你可以試試改鎖驢子伺服器的連接埠

我是用驢子下載我要的所有東東 已超過1T了 ^^"
我想你可能要傷腦筋了
我用了EDonkey&Emule近2年了我發現問題可能出在驢子的SEVER端 只要他開一個PORT Clinet 連進去之後 她好像可以指定兩端的傳輸PORT 那大大你可能要封鎖驢子的 SEVER端所開的PORT 不要讓Clinet 有機會連入 但問題是我們不知道 SEVER使用者他們會開什麼PORT 傷腦筋ㄋㄟ
不對不要殺我 因為它太吸引人了1T的東東害我都想買DVD來壓縮用 但.....目前還不是時機

[Omar Lin]

呵~~
謝謝各位網友的指導~~
驢子確實較麻煩,目前我用這套防火強將port全封住,再把幾個慢慢打開~~
目前有看到效果了,只要對方不要改到用web port就好...不然我看真的得
直接封住IP或是網卡@@

我不知這是否有幫助
Ports
The following list shows the ports used by eMule when using it's default settings. If you change anything in Preferences -> Connection you will have to take the changes into account when configuring your firewall or router.

1) Local Port: 4662
Remote Port: any
Protocol: TCP
Direction: incoming
Purpose: Client Port / Connections from other clients, Client to Client Source Exchange

Note: You can change this port in Preferences -> Connection -> Client Port
This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router



2) Local Port: any
Remote Port: 4662
Protocol: TCP
Direction: outgoing
Purpose: Client Port / Connections to other clients, Client to Client Source Exchange

Note: 4662 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall



3) Local Port: 4672
Remote Port: any
Protocol: UDP
Direction: incoming
Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

Note: This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router.
If you are not able to forward this port check the disable box in Preferences -> Connection -> UDP Port



4) Local Port: any
Remote Port: 4672
Protocol: UDP
Direction: outgoing
Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

Note: 4672 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall

5) Local Port: any
Remote Port: 4661
Protocol: TCP
Direction: outgoing
Purpose: Connection to server


Note: 4661 is the default port of a server. Many server use different ports. Configuring a firewall the remote port again changes to any.



6) Local Port: any
Remote Port: 4665
Protocol: UDP
Direction: outgoing
Purpose: Source asking on servers
Note: Servers using the default port 4661 TCP (see #5) automatically set their port for source asking to 4665 UDP. If a server uses a different port in #5 the corresponding UDP port is set to [Connection Port + 4]. For firewalls the remote port here is any.



7) Local Port: 4711
Remote Port: any
Protocol: TCP
Direction: incoming
Purpose: Webserver
Note: This is the default port for the web interface. When using a router this port has to be forwarded or no connection to the webserver will be possible.

Last update on: 2003-05-04 by Monk

[GP03S]

直接下去看 哪個人在養驢子的 開導他一下 沒用就把他驢子宰了

[Omar Lin]

原文由 Stars_River 所發表
我不知這是否有幫助
Ports
The following list shows the ports used by eMule when using it's default settings. If you change anything in Preferences -> Connection you will have to take the changes into account when configuring your firewall or router.

1) Local Port: 4662
Remote Port: any
Protocol: TCP
Direction: incoming
Purpose: Client Port / Connections from other clients, Client to Client Source Exchange

Note: You can change this port in Preferences -> Connection -> Client Port
This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router



2) Local Port: any
Remote Port: 4662
Protocol: TCP
Direction: outgoing
Purpose: Client Port / Connections to other clients, Client to Client Source Exchange

Note: 4662 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall



3) Local Port: 4672
Remote Port: any
Protocol: UDP
Direction: incoming
Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

Note: This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router.
If you are not able to forward this port check the disable box in Preferences -> Connection -> UDP Port



4) Local Port: any
Remote Port: 4672
Protocol: UDP
Direction: outgoing
Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

Note: 4672 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall

5) Local Port: any
Remote Port: 4661
Protocol: TCP
Direction: outgoing
Purpose: Connection to server


Note: 4661 is the default port of a server. Many server use different ports. Configuring a firewall the remote port again changes to any.



6) Local Port: any
Remote Port: 4665
Protocol: UDP
Direction: outgoing
Purpose: Source asking on servers
Note: Servers using the default port 4661 TCP (see #5) automatically set their port for source asking to 4665 UDP. If a server uses a different port in #5 the corresponding UDP port is set to [Connection Port + 4]. For firewalls the remote port here is any.



7) Local Port: 4711
Remote Port: any
Protocol: TCP
Direction: incoming
Purpose: Webserver
Note: This is the default port for the web interface. When using a router this port has to be forwarded or no connection to the webserver will be possible.

Last update on: 2003-05-04 by Monk

感謝,目前就是將這些port全封住~~
已有見效果~~