![]() |
|
論壇說明 |
歡迎您來到『史萊姆論壇』 ^___^ 您目前正以訪客的身份瀏覽本論壇,訪客所擁有的權限將受到限制,您可以瀏覽本論壇大部份的版區與文章,但您將無法參與任何討論或是使用私人訊息與其他會員交流。若您希望擁有完整的使用權限,請註冊成為我們的一份子,註冊的程序十分簡單、快速,而且最重要的是--註冊是完全免費的! 請點擊這裡:『註冊成為我們的一份子!』 |
![]() ![]() |
|
主題工具 | 顯示模式 |
|
![]() |
#1 (permalink) |
長老會員
![]() |
![]() 後來當得超級嚴重
只好送修 一開始只檢查出記憶體壞掉 但...這是全新的記憶體呢!!用不到兩個月就壞啦!! 再仔細檢查發現主機板上五個電容爆凸了!! ![]() ![]() ![]() 難怪什麼記憶體插上來都用不了多久就燒了 目前暫時把壞掉的記憶體拔除,電腦運作一切正常,唯處理速度慢了點 感謝各位指教 請問要怎麼標示「已解決」?? |
__________________ 我聽爺爺講了一個故事 故事裏的事是那昨天的事 故事裏有好人也有壞人 故事裏有好事也有壞事 故事裏有多少是是非非 故事裏有多少非非是是 故事裏的事,說是就是,不是也是 故事裏的事,說不是就不是,是也不是 故事裏的事也許是已真實 故事裏的事也許是從來沒有的事 其實故事本來就是已故事 故事就是故事 故事就是故事 |
|
![]() |
送花文章: 194,
![]() |
![]() |
#3 (permalink) |
長老會員
![]() |
![]() 好幾年的版子了,就是P4等級的而已
現在好像都得買雙核心系統的 AOPEN的型號AX45-8XN 不知道類似的版子線在市面上還有沒有(他牌的也可以)?? 可以的話我想直接換一個 不知道大大有沒有什麼建議? 下面這是我主機板的介紹: The AX45-8XN is further proof that the SiS648 is a fine chipset - when it is correctly implemented. While I am still in early stages of evaluation, what I have seen so far is so positive I decided I needed to share: 1) DDR400 WORKS GREAT - straight out of the box. With 1 stick of Samsung DDR400, 2 sticks of Samsung, even 3 sticks - no problem. With 1 stick of Kingmax DDR400, 2 sticks of Kingmax, sorry I don't have 3 sticks. Will test Corsair XMS3200C2 this evening. 2) 1Mhz FSB settings from 100-250. Memory ratios of 4:3, 1:1, 3:4, 4:5, 2:3 AND a feedout IN BIOS of resulting Memory Speed. (At 133/533 FSB that translates to 100,133,177,166,200) 3) CPU voltage of 1.10 to 1.85V in 0.025V increments. 4) Full memory tweaking, inclusing Command Rate (1T, 2T, Auto) 5) PC Health status and Hardware Monitor 6) vDimm adjustment by jumper - but only 2.5V or 2.7V. 7) 6USB 2.0 AND 3 FIREWIRE AND on-board 10/100 LAN AND 6 PCI slots. AOpen says the vDimm adjustment is useful for DDR400, but I found DDR400 ran just great with the default 2.5V - including the picky Kingmax. THIS BOARD RUNS DDR400 WITHOUT EXCEPTION SO FAR - it's the only one that handles it all so far other than the Gigabyte 8SR667. I have OC'ed to 150 FSB so far, but have not been able to get higher. Will approach this more logically as testing proceeds. We may or may not be up against a SiS OC wall like on some other 648 implementations. PLEASE NOTE: The shipping board is the A45-8XN and not the A45-8X MAX described on the website. It is not exactly like any of the web-site pictures. There are excellent aluminum passive heatsinks on BOTH the North and South Bridges. The board is all BLACK and the cables and adapters (3 Firewire and additional 2 USB) that come with the board are ALSO black. The black and silver looks really sharp. Yes, the 8XN DOES come with 3 firewire on-board. I will be testing the unbuffered memory performance later, but it looks like AOpen waited to release this board until they got DDR400 fixed - or until a working 648 chipset revision. Voltage is STABLE, STABLE, STABLE. All rails read just great on a quality 350W PS, and the 1.5V is 1.49V. The AX45-8XN is only $95 from www.myaopen.com ($7 Fedex Saver shipping) or $95 plus shipping from www.mwave.com. It's a genuine value. I will do further testing to see if the performance with DDR400 is real, or if it has been achieved with lowered mem timings. Will report findings later. (First tests show Buffered with Samsung SPD 2.5,4,4,1 at 133/533 2.26GHz of just over 3000. Unbuffered at same timings is mid to upper 1600's.) http://www.abxzone.com/forums/f66/ao...gem-29299.html |
![]() |
送花文章: 194,
![]() |
![]() |
#4 (permalink) |
長老會員
![]() |
![]() 這是官方介紹
http://www.axiontech.com/prdt.php?it...31a0ee32ad089d Chipset SiS 648 Form Factor ATX CPU FSB 533MHz FSB CPU Sockets Socket 478 Mem. Config 3 DDR333 Expension Slots AGP 8X, 6 PCI, 1 CNR USB/Firewire USB2.0 Lan LAN Audio Realtek AC'97 CODEC on-board (ALC650E) |
![]() |
送花文章: 194,
![]() |
![]() |
#7 (permalink) | |
長老會員
![]() |
![]() 引用:
一個當然是AOPEN要負責幫我修....當然已經不保固了,但跟這塊板子搭配的零件還一大堆沒問題的,我不希望一口氣換這麼多東西,所以第一個就是修。 一個就是上二手市場去找其他也可以相容的板子,或者看看還有沒有店家有這類庫存,這邊需要各位大大的幫忙,因為我對硬體實在是不懂,有哪些板子是可以相容的,還請各位懂電腦的大大提供型號,方便我去找尋。 還有一個方案是...有沒有可能買到一塊板子,它是需要換掉若搭配的硬體(比如CPU一定要換),但其他大多硬體是不須要更換的(比如RAM、顯示卡、HD....等等)亦即我只需要更動少數的硬體就可以做好維修的動作。 至於買全新的電腦現在似乎不是很好的時間點,我考量到我即將畢業並可能入伍,這個時間買新電腦似乎用不到,等退伍的時候再買也許會比較實用一點。 以上三點還請各位大大惠賜建議。感恩。 |
|
![]() |
送花文章: 194,
![]() |
![]() |
#8 (permalink) |
超級版主
![]() |
![]() 您要求的不難, 只要您把現有的配備規格寫下來(例如HDD是ATA100 顯示卡是PCI)然後去照著規格買就行了.
至於CPU跟RAM這就很難說了, 一般來說CPU跟RAM都是跟著主機版的FRONT BUS來搭配, 也就是說如果CPU要換, RAM要換掉的機會也不小, 不過有些主機版可以支援很多規格的RAM, 這部分就參考一下. 附帶建議一下, 請您參考. 主機版好壞差很多, 大家平平都是用INTEL, 速度跑出來差很多, 經常就是因為主機版的差異. 所以選主機板時請切勿以"價格"來做第一考量, 還是多請教哪塊主機板的評價較好. |
__________________ 經驗分享是學習的一種 請多珍惜這片學習的園地 史版啞甘部主任 ![]() ![]() |
|
![]() |
送花文章: 52690,
![]() |
![]() ![]() |
|
|
![]() |
||||
主題 | 主題作者 | 討論區 | 回覆 | 最後發表 |
winxp win2000 win98? | ttttyyyy | 軟體應用問題討論區 | 3 | 2003-01-10 06:03 PM |